[1970-Jan-01 00:01:26.340487]: Loading settings from string... [1970-Jan-01 00:01:26.607188]: Parsing toolhead settings for bronx... [1970-Jan-01 00:01:26.640885]: Rebuilding toolhead structure [1970-Jan-01 00:01:26.669072]: Building bronx location 0... [1970-Jan-01 00:01:26.836354]: Initialization: heater settings [1970-Jan-01 00:01:26.838202]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C [1970-Jan-01 00:01:26.858149]: Settings: Parsing home subtree... [1970-Jan-01 00:01:26.893524]: Init endstop for axis: 0, type: load_sense, polarity: false [1970-Jan-01 00:01:26.913288]: Init endstop for axis: 1, type: load_sense, polarity: false [1970-Jan-01 00:01:26.915027]: Init endstop for axis: 2, type: switch, polarity: true [1970-Jan-01 00:01:26.938843]: Parsing root settings... [1970-Jan-01 00:01:27.003197]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732 [1970-Jan-01 00:01:27.041331]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732 [1970-Jan-01 00:01:27.043140]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400 [1970-Jan-01 00:01:27.044978]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55 [1970-Jan-01 00:01:27.046901]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 231 29 0 [1970-Jan-01 00:01:27.049104]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 29 0 [1970-Jan-01 00:01:27.061544]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0 [1970-Jan-01 00:01:27.063744]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31 [1970-Jan-01 00:01:27.066123]: syncing set to true [1970-Jan-01 00:01:27.104672]: Axis count unspecified, defaulting to 4 [1970-Jan-01 00:01:27.143851]: Loading capacitor model settings for extruder 0 [1970-Jan-01 00:01:27.147221]: Have 1 valid ToolheadManager pointers, 0 is 0x1dea60 [1970-Jan-01 00:01:27.243923]: setting driver address to 22 [1970-Jan-01 00:01:31.450829]: Init step: 0 [1970-Jan-01 00:01:31.510833]: Reset Toolhead Program State [1970-Jan-01 00:01:31.512502]: Toolhead programmer: Resetting [1970-Jan-01 00:01:31.514252]: done [1970-Jan-01 00:01:32.510645]: Init step: 1 [1970-Jan-01 00:01:32.517702]: done [1970-Jan-01 00:01:33.002247]: Init step: 2 [1970-Jan-01 00:01:33.003945]: done [1970-Jan-01 00:01:33.504030]: Init step: 3 [1970-Jan-01 00:01:33.621488]: done [1970-Jan-01 00:01:34.006172]: Init step: 4 [1970-Jan-01 00:01:34.026444]: done [1970-Jan-01 00:01:34.508475]: Init step: 5 [1970-Jan-01 00:01:34.525176]: done [1970-Jan-01 00:01:35.020835]: Init step: 5 [1970-Jan-01 00:01:35.122974]: done [1970-Jan-01 00:01:35.512666]: Init step: 5 [1970-Jan-01 00:01:35.593847]: done [1970-Jan-01 00:01:36.014560]: Init step: 5 [1970-Jan-01 00:01:36.016299]: done [1970-Jan-01 00:01:36.516740]: Init step: 5 [1970-Jan-01 00:01:36.530987]: done [1970-Jan-01 00:01:37.018790]: Init step: 5 [1970-Jan-01 00:01:37.131131]: done [1970-Jan-01 00:01:37.521587]: Init step: 5 [1970-Jan-01 00:01:37.530971]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b Packet CRC: 0x0 [1970-Jan-01 00:01:37.532829]: Toolhead 0 : Toolhead Response Fail with comm_error: 1 Retry # : 1 [1970-Jan-01 00:01:37.534472]: done [1970-Jan-01 00:01:38.023594]: Init step: 5 [1970-Jan-01 00:01:38.025354]: done [1970-Jan-01 00:01:38.534035]: Init step: 5 [1970-Jan-01 00:01:38.536237]: done [1970-Jan-01 00:01:39.035306]: Init step: 5 [1970-Jan-01 00:01:39.137330]: done [1970-Jan-01 00:01:39.537439]: Init step: 5 [1970-Jan-01 00:01:39.550914]: Got valid API version 6 for Toolhead 0 [1970-Jan-01 00:01:39.557013]: done [1970-Jan-01 00:01:40.039057]: Init step: 5 [1970-Jan-01 00:01:40.051974]: done [1970-Jan-01 00:01:40.545409]: Init step: 5 [1970-Jan-01 00:01:40.647401]: done [1970-Jan-01 00:01:41.048624]: Init step: 5 [1970-Jan-01 00:01:41.062077]: Toolhead 0 state error: 80 [1970-Jan-01 00:01:41.063876]: Toolhead 0: Toolhead has Firmware version 1.7,720 [1970-Jan-01 00:01:41.065741]: Toolhead 0 initialized [1970-Jan-01 00:01:41.067411]: done [1970-Jan-01 00:01:41.554782]: Init step: 6 [1970-Jan-01 00:01:41.556464]: done [1970-Jan-01 00:01:42.056652]: Init step: 7 [1970-Jan-01 00:01:42.059051]: done [1970-Jan-01 00:01:42.573439]: PRU Event: PRU_INIT [1970-Jan-01 00:01:43.574371]: bronx lowest mem space: 0x382 bytes [1970-Jan-01 00:01:43.576098]: Checking tool eeprom version [1970-Jan-01 00:01:43.577846]: Commanding tool usage stat retrieve [1970-Jan-01 00:01:43.579451]: New tool uid 0x1447c attached, updating info cache [1970-Jan-01 00:01:45.090924]: Connected tool has eepromv4 [1970-Jan-01 00:01:46.600914]: Raw usage stats: retract 708ct, extrusion 365010 steps, 1388 seconds, refurbed 0 times [1970-Jan-01 00:01:46.602646]: Steps/mm not configured, tool usage logging will be wrong! [1970-Jan-01 00:02:03.907564]: GetCachedToolUsageStats called [1970-Jan-01 00:02:06.235309]: bronx lowest mem space: 0x37a bytes [1970-Jan-01 00:02:39.650618]: bronx lowest mem space: 0x376 bytes [1970-Jan-01 00:02:43.532059]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-01 00:02:43.533761]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:02:43.705146]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:02:44.931073]: bronx lowest mem space: 0x352 bytes [1970-Jan-01 00:04:45.296960]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Jan-01 00:04:45.298890]: Load Sense Limit Method: 1 [1970-Jan-01 00:04:45.301623]: Last sync period had (0,0,11733) buffer fulls due to suspend moves [1970-Jan-01 00:04:45.303492]: Libstepper All Axis Abort [1970-Jan-01 00:04:48.796452]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:04:49.992857]: HOME: 1 homing: Limit Detected!: [1970-Jan-01 00:04:49.994621]: TH0: 2 failures in last 265 packets (0.754717%) [1970-Jan-01 00:04:49.996517]: Toolhead Abort [1970-Jan-01 00:04:49.998157]: aborting pru with shutdown=true [1970-Jan-01 00:04:50.001288]: Last sync period had (0,0,12135) buffer fulls due to suspend moves [1970-Jan-01 00:04:50.003004]: Libstepper All Axis Abort [1970-Jan-01 00:04:50.065369]: HOME: 1 homing: Limit Detected!: [1970-Jan-01 00:04:50.098542]: HOME: 1 homing: Limit Detected!: [1970-Jan-01 00:04:51.874229]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Jan-01 00:04:51.876161]: Load Sense Limit Method: 0 [1970-Jan-01 00:04:51.878681]: Last sync period had (0,0,12297) buffer fulls due to suspend moves [1970-Jan-01 00:04:51.880703]: Libstepper All Axis Abort [1970-Jan-01 00:04:53.054960]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:04:56.432168]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:04:59.847469]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:01.602722]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:05:01.604553]: Toolhead Abort [1970-Jan-01 00:05:01.606213]: aborting pru with shutdown=true [1970-Jan-01 00:05:01.608777]: Last sync period had (0,0,13167) buffer fulls due to suspend moves [1970-Jan-01 00:05:01.610721]: Libstepper All Axis Abort [1970-Jan-01 00:05:01.637489]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:05:01.663309]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:05:01.705903]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:05:02.164187]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.226706]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.251719]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.275162]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.304590]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.340287]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.372904]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.395457]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.419116]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.444640]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.477804]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.510198]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.534910]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.559863]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.590410]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.633089]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.656455]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.685606]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.734965]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.770464]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.795063]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.820241]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.849502]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.891995]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.917977]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.943580]: HOME: wait for buffer empty [1970-Jan-01 00:05:02.967152]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.034245]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.095029]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.137710]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.172474]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.199962]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.245481]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.283869]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.310180]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.340428]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.365317]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.401302]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.431162]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.455133]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.479929]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.503614]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.537935]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.569757]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.599638]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.623363]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.647440]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.689130]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.718585]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.761826]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.795715]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.829767]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.864581]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:03.866326]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.891421]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.925151]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.959831]: HOME: wait for buffer empty [1970-Jan-01 00:05:03.983236]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.007371]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.032479]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.074358]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.106558]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.131562]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.155308]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.180334]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.218608]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.250427]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.295057]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.330418]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.364724]: HOME: wait for buffer empty [1970-Jan-01 00:05:04.389771]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Jan-01 00:05:07.285881]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:10.522955]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:13.731483]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:17.024250]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:20.239837]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:23.453270]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:26.025396]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:05:26.027156]: Toolhead Abort [1970-Jan-01 00:05:26.028829]: aborting pru with shutdown=false [1970-Jan-01 00:05:26.040782]: Last sync period had (0,0,15525) buffer fulls due to suspend moves [1970-Jan-01 00:05:26.042524]: Libstepper All Axis Abort [1970-Jan-01 00:05:26.099464]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:05:26.130542]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:05:26.157571]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:05:26.902375]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:28.538779]: GAP: Query->Await [1970-Jan-01 00:05:28.565412]: GAP: Await [1970-Jan-01 00:05:28.590304]: GAP: Await [1970-Jan-01 00:05:28.601780]: TH0: Retreived step position 11665679 [1970-Jan-01 00:05:28.617661]: wait for PRU status in get position [1970-Jan-01 00:05:28.619278]: wait for PRU status in get position [1970-Jan-01 00:05:28.621084]: GAP: Await->Done(Query) [1970-Jan-01 00:05:28.656125]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7) [1970-Jan-01 00:05:28.719797]: Syncing turned true [1970-Jan-01 00:05:28.731279]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-01 00:05:28.824060]: Toolhead 0 commands idle [1970-Jan-01 00:05:28.914219]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-01 00:05:29.066933]: Toolhead 0 ADC Error: 1 [1970-Jan-01 00:05:29.162975]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-01 00:05:29.164669]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-01 00:05:29.171845]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-01 00:05:29.173582]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-01 00:05:29.175296]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-01 00:05:29.176915]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-01 00:05:30.608982]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:33.795513]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:36.232681]: Buffer stall ongoing: 4386 [1970-Jan-01 00:05:36.256259]: Buffer stall ongoing: 9288 [1970-Jan-01 00:05:36.279243]: Buffer stall ongoing: 14190 [1970-Jan-01 00:05:36.311985]: Buffer stall ongoing: 21156 [1970-Jan-01 00:05:36.343426]: Last sync period had (0,0,765) buffer fulls due to suspend moves [1970-Jan-01 00:05:36.345170]: Syncing turned false [1970-Jan-01 00:05:36.358620]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-01 00:05:36.360678]: Buffer stall ongoing: 28251 [1970-Jan-01 00:05:37.026697]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:37.415855]: HES logged: false [1970-Jan-01 00:05:37.442946]: HES logged: false [1970-Jan-01 00:05:37.467263]: HES logged: false [1970-Jan-01 00:05:37.492817]: HES logged: false [1970-Jan-01 00:05:37.537122]: HES logged: false [1970-Jan-01 00:05:37.562919]: HES logged: false [1970-Jan-01 00:05:37.588334]: HES logged: false [1970-Jan-01 00:05:37.620940]: HES logged: false [1970-Jan-01 00:05:37.664200]: HES logged: false [1970-Jan-01 00:05:37.689680]: HES logged: false [1970-Jan-01 00:05:37.716168]: HES logged: false [1970-Jan-01 00:05:37.742194]: HES logged: false [1970-Jan-01 00:05:37.776409]: HES logged: false [1970-Jan-01 00:05:37.811314]: HES logged: false [1970-Jan-01 00:05:37.848034]: HES logged: false [1970-Jan-01 00:05:37.873904]: HES logged: false [1970-Jan-01 00:05:37.936986]: HES logged: false [1970-Jan-01 00:05:37.966752]: HES logged: false [1970-Jan-01 00:05:37.992851]: HES logged: false [1970-Jan-01 00:05:38.017875]: HES logged: false [1970-Jan-01 00:05:38.060711]: HES logged: false [1970-Jan-01 00:05:38.094500]: HES logged: false [1970-Jan-01 00:05:38.119705]: HES logged: false [1970-Jan-01 00:05:38.146486]: HES logged: false [1970-Jan-01 00:05:38.189856]: HES logged: false [1970-Jan-01 00:05:38.214862]: HES logged: false [1970-Jan-01 00:05:38.284942]: HES logged: false [1970-Jan-01 00:05:38.350978]: HES logged: false [1970-Jan-01 00:05:38.382883]: HES logged: false [1970-Jan-01 00:05:38.412886]: HES logged: false [1970-Jan-01 00:05:38.470723]: HES logged: false [1970-Jan-01 00:05:38.501983]: HES logged: false [1970-Jan-01 00:05:38.529173]: HES logged: false [1970-Jan-01 00:05:38.554584]: HES logged: false [1970-Jan-01 00:05:38.579961]: HES logged: false [1970-Jan-01 00:05:38.631346]: HES logged: false [1970-Jan-01 00:05:38.655764]: HES logged: false [1970-Jan-01 00:05:38.681893]: HES logged: false [1970-Jan-01 00:05:38.714479]: HES logged: false [1970-Jan-01 00:05:38.757320]: HES logged: false [1970-Jan-01 00:05:38.782442]: HES logged: false [1970-Jan-01 00:05:38.808383]: HES logged: false [1970-Jan-01 00:05:38.834704]: HES logged: false [1970-Jan-01 00:05:38.884025]: HES logged: false [1970-Jan-01 00:05:38.909523]: HES logged: false [1970-Jan-01 00:05:38.939945]: HES logged: false [1970-Jan-01 00:05:38.997810]: HES logged: false [1970-Jan-01 00:05:39.028787]: HES logged: false [1970-Jan-01 00:05:39.054352]: HES logged: false [1970-Jan-01 00:05:39.083266]: HES logged: false [1970-Jan-01 00:05:39.125238]: HES logged: false [1970-Jan-01 00:05:39.157624]: HES logged: false [1970-Jan-01 00:05:39.184277]: HES logged: false [1970-Jan-01 00:05:39.208938]: HES logged: false [1970-Jan-01 00:05:39.235864]: HES logged: false [1970-Jan-01 00:05:39.279328]: HES logged: false [1970-Jan-01 00:05:39.304436]: HES logged: false [1970-Jan-01 00:05:39.331291]: HES logged: false [1970-Jan-01 00:05:39.363776]: HES logged: false [1970-Jan-01 00:05:39.406029]: HES logged: false [1970-Jan-01 00:05:39.433884]: HES logged: false [1970-Jan-01 00:05:39.468795]: HES logged: true [1970-Jan-01 00:05:40.909092]: Toolhead 0 ADC Error: 0 [1970-Jan-01 00:05:43.543144]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:46.692713]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:49.808024]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:52.940499]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:56.078564]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:05:56.612575]: Toolhead Abort [1970-Jan-01 00:05:56.614303]: aborting pru with shutdown=true [1970-Jan-01 00:05:56.616946]: Last sync period had (0,0,2685) buffer fulls due to suspend moves [1970-Jan-01 00:05:56.618685]: Libstepper All Axis Abort [1970-Jan-01 00:05:56.686025]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:05:56.687991]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:06:41.589808]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 00:06:41.591760]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:06:42.807564]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:06:45.116147]: Toolhead 0 state error: 0 [1970-Jan-01 00:08:01.113355]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:04.874161]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:08.560851]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:12.498990]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:16.171110]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:20.088713]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:23.751895]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:27.639709]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:31.390403]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:35.251990]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:35.952264]: wait for axis 0 full: false offset: 90 l3map offset: 90 status: 1 position -9743 status count 1001 [1970-Jan-01 00:08:39.027019]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:42.727684]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:46.596204]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:08:49.133860]: Raw HES proceeding [1970-Jan-01 00:08:49.184907]: Got raw val 24131, saturated: true [1970-Jan-01 00:08:49.209473]: Returning HES [1970-Jan-01 00:08:49.221441]: Sending back val 24131, saturated true [1970-Jan-01 00:08:49.307883]: Toolhead Abort [1970-Jan-01 00:08:49.309594]: aborting pru with shutdown=true [1970-Jan-01 00:08:49.322586]: Last sync period had (0,0,13644) buffer fulls due to suspend moves [1970-Jan-01 00:08:49.325137]: Libstepper All Axis Abort [1970-Jan-01 00:08:51.031851]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 00:08:51.033755]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:08:52.242419]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:08:58.378084]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:02.335022]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:06.064094]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:10.031750]: Raw HES proceeding [1970-Jan-01 00:09:10.131743]: Got raw val 24125, saturated: true [1970-Jan-01 00:09:10.156396]: Returning HES [1970-Jan-01 00:09:10.158186]: Sending back val 24125, saturated true [1970-Jan-01 00:09:10.254597]: Toolhead Abort [1970-Jan-01 00:09:10.256317]: aborting pru with shutdown=true [1970-Jan-01 00:09:10.270850]: Last sync period had (0,0,14931) buffer fulls due to suspend moves [1970-Jan-01 00:09:10.273401]: Libstepper All Axis Abort [1970-Jan-01 00:09:11.492682]: Toolhead 0 state error: 80 [1970-Jan-01 00:09:16.855716]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 00:09:16.857458]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:09:18.094455]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:09:19.745878]: Toolhead 0 state error: 0 [1970-Jan-01 00:09:19.765913]: Steps overrun! last 65130 and just got 10449 [1970-Jan-01 00:09:19.767582]: calculated 10854 [1970-Jan-01 00:09:21.637419]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:25.325794]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:28.985250]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:32.940500]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:36.608925]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:40.525960]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:44.195909]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:45.222327]: wait for axis 0 full: false offset: 72 l3map offset: 90 status: 1 position -9743 status count 1001 [1970-Jan-01 00:09:48.090368]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:51.831516]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:55.514089]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:09:59.371699]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:10:03.110472]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:10:07.045822]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:10:11.248254]: Raw HES proceeding [1970-Jan-01 00:10:11.303979]: Got raw val 24128, saturated: true [1970-Jan-01 00:10:11.328385]: Returning HES [1970-Jan-01 00:10:11.336477]: Sending back val 24128, saturated true [1970-Jan-01 00:10:11.416963]: Toolhead Abort [1970-Jan-01 00:10:11.418804]: aborting pru with shutdown=true [1970-Jan-01 00:10:11.437546]: Last sync period had (0,0,19245) buffer fulls due to suspend moves [1970-Jan-01 00:10:11.439307]: Libstepper All Axis Abort [1970-Jan-01 00:10:15.099249]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:10:15.101182]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:10:48.330696]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-01 00:10:48.332541]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:10:48.879567]: bronx lowest mem space: 0x34e bytes [1970-Jan-01 00:10:49.178540]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Jan-01 00:10:49.192891]: Load Sense Limit Method: 1 [1970-Jan-01 00:10:49.200868]: Last sync period had (0,0,19548) buffer fulls due to suspend moves [1970-Jan-01 00:10:49.202625]: Libstepper All Axis Abort [1970-Jan-01 00:10:50.662496]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:10:55.058368]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:10:55.762360]: HOME: 1 homing: Limit Detected!: [1970-Jan-01 00:10:55.764323]: Toolhead Abort [1970-Jan-01 00:10:55.766016]: aborting pru with shutdown=true [1970-Jan-01 00:10:55.769305]: Last sync period had (0,0,20013) buffer fulls due to suspend moves [1970-Jan-01 00:10:55.771461]: Libstepper All Axis Abort [1970-Jan-01 00:10:55.830472]: HOME: 1 homing: Limit Detected!: [1970-Jan-01 00:10:57.658011]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Jan-01 00:10:57.665744]: Load Sense Limit Method: 0 [1970-Jan-01 00:10:57.676639]: Last sync period had (0,0,20139) buffer fulls due to suspend moves [1970-Jan-01 00:10:57.678400]: Libstepper All Axis Abort [1970-Jan-01 00:11:00.309207]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:04.762010]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:09.121466]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:11.746972]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:11:11.748739]: Toolhead Abort [1970-Jan-01 00:11:11.751455]: aborting pru with shutdown=true [1970-Jan-01 00:11:11.754178]: Last sync period had (0,0,21153) buffer fulls due to suspend moves [1970-Jan-01 00:11:11.755899]: Libstepper All Axis Abort [1970-Jan-01 00:11:11.806532]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:11:14.054615]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:14.461424]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Jan-01 00:11:18.055406]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:21.926902]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:25.764997]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:29.653562]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:33.442160]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:36.117137]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:11:36.118913]: Toolhead Abort [1970-Jan-01 00:11:36.120813]: aborting pru with shutdown=false [1970-Jan-01 00:11:36.123469]: Last sync period had (0,0,23133) buffer fulls due to suspend moves [1970-Jan-01 00:11:36.125191]: Libstepper All Axis Abort [1970-Jan-01 00:11:36.155476]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:11:36.571825]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true [1970-Jan-01 00:11:36.893434]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:37.104505]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:37.342726]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:37.578547]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:37.809635]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:38.023630]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:38.255375]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:38.493805]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:38.728798]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:38.941200]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:39.136843]: wait for axis 0 full: false offset: 108 l3map offset: 126 status: 1 position -4235 status count 1001 [1970-Jan-01 00:11:39.176034]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:39.408133]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:39.642965]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:39.854507]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:40.086584]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:11:40.141955]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:11:40.143737]: Toolhead Abort [1970-Jan-01 00:11:40.145414]: aborting pru with shutdown=false [1970-Jan-01 00:11:40.160804]: Last sync period had (0,0,23184) buffer fulls due to suspend moves [1970-Jan-01 00:11:40.162668]: Libstepper All Axis Abort [1970-Jan-01 00:11:40.202704]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:11:40.410834]: GAP: Query->Await [1970-Jan-01 00:11:40.424416]: TH0: Retreived step position 11600143 [1970-Jan-01 00:11:40.443887]: wait for PRU status in get position [1970-Jan-01 00:11:40.445529]: wait for PRU status in get position [1970-Jan-01 00:11:40.447104]: GAP: Await->Done(Query) [1970-Jan-01 00:11:40.643848]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-01 00:11:40.646365]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:11:41.222796]: Expecting 234112 steps extruded this print from 2156.72 mm of plastic [1970-Jan-01 00:11:41.396232]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 00:11:41.397975]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:11:41.466230]: Expected packet id: 0x8e, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0, [1970-Jan-01 00:11:41.468120]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:11:41.472540]: Expected packet id: 0x8e, Got packet id: 0x8d, Full packet: 0xf3,0x0,0x0,0x21,0x0,0xb0,0x0,0xf,0x53,0x38,0x1,0x0,0xb4,0x0,0x1,0x44,0x7c,0x3,0x4e,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x8d,0xd2,0xe9,0x1e,0x94, [1970-Jan-01 00:11:41.482145]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:11:41.486753]: Toolhead 0: Unsupported Command [1970-Jan-01 00:11:41.536001]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:12:58.783958]: Expend Buffer: false [1970-Jan-01 00:12:58.881530]: Syncing turned true [1970-Jan-01 00:12:58.972696]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-01 00:12:58.974381]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-01 00:12:59.118637]: Toolhead 0 ADC Error: 1 [1970-Jan-01 00:12:59.876709]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-01 00:12:59.878415]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-01 00:12:59.880415]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-01 00:12:59.882098]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-01 00:12:59.883910]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-01 00:12:59.885566]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-01 00:13:00.250746]: Expected packet id: 0xd4, Got packet id: 0xd3, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x5e,0x39,0x1,0x0,0xd7,0x0,0x1,0x44,0x7c,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x8,0x48,0x0,0xd3,0x53,0x66,0xb2,0xf1, [1970-Jan-01 00:13:00.252758]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:13:00.599188]: Expected packet id: 0xfc, Got packet id: 0xfb, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x5e,0x6c,0x1,0x0,0xd7,0x0,0x1,0x44,0x7c,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x29,0x0,0xfb,0x8a,0xb2,0xc9,0x6b, [1970-Jan-01 00:13:00.601259]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:13:01.023993]: Expected packet id: 0x3b, Got packet id: 0x3a, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x5e,0xf2,0x1,0x0,0xd7,0x0,0x1,0x44,0x7c,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x4,0xea,0x0,0x3a,0x67,0x74,0x71,0xcf, [1970-Jan-01 00:13:01.025894]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:13:43.307873]: Toolhead 0 state error: 81 [1970-Jan-01 00:13:44.873886]: toolhead pausing [1970-Jan-01 00:13:44.875585]: Toolhead 0 : Retry: Waited 1.56261s from state change [1970-Jan-01 00:13:44.880673]: Last sync period had (0,315,3396) buffer fulls due to suspend moves [1970-Jan-01 00:13:44.882438]: Syncing turned false [1970-Jan-01 00:13:44.884705]: quack pause: true [1970-Jan-01 00:13:44.993632]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-01 00:13:45.035272]: axis running: 0 [1970-Jan-01 00:13:45.189693]: axis running: 0 [1970-Jan-01 00:13:45.271246]: axis running: 0 [1970-Jan-01 00:13:45.333830]: axis running: 0 [1970-Jan-01 00:13:45.393068]: axis running: 0 [1970-Jan-01 00:13:45.425551]: axis running: 0 [1970-Jan-01 00:13:45.447456]: Toolhead 0 state error: 0 [1970-Jan-01 00:13:45.552129]: CLEAR BUFFER FAIL! in libstepper::Abort() [1970-Jan-01 00:13:45.554738]: Last sync period had (0,315,3396) buffer fulls due to suspend moves [1970-Jan-01 00:13:45.560743]: Libstepper All Axis Abort [1970-Jan-01 00:13:45.562493]: Clear Toolhead Buffer [1970-Jan-01 00:13:45.602807]: clear toolhead buffer acknowledged [1970-Jan-01 00:13:45.698999]: toolhead unpausing [1970-Jan-01 00:13:45.700857]: quack pause: false [1970-Jan-01 00:13:45.815173]: Expend Buffer: true [1970-Jan-01 00:13:45.884899]: Last sync period had (0,315,3414) buffer fulls due to suspend moves [1970-Jan-01 00:13:45.886703]: Syncing turned false [1970-Jan-01 00:13:45.943383]: Toolhead 0 ADC Error: 0 [1970-Jan-01 00:13:45.974566]: GAP: Query->Await [1970-Jan-01 00:13:46.002849]: TH0: Retreived step position 13893903 [1970-Jan-01 00:13:46.042424]: wait for PRU status in get position [1970-Jan-01 00:13:46.044233]: wait for PRU status in get position [1970-Jan-01 00:13:46.045877]: GAP: Await->Done(Query) [1970-Jan-01 00:13:46.158417]: Suspend [1970-Jan-01 00:13:46.171729]: Suspend index 81 found, A-pos 109.929 [1970-Jan-01 00:13:46.524569]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:13:50.551021]: GAP: Query->Await [1970-Jan-01 00:13:50.562721]: TH0: Retreived step position 13893903 [1970-Jan-01 00:13:50.586757]: wait for PRU status in get position [1970-Jan-01 00:13:50.588521]: wait for PRU status in get position [1970-Jan-01 00:13:50.601158]: GAP: Await->Done(Query) [1970-Jan-01 00:13:51.358375]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 00:13:51.368110]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:13:51.866523]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:13:55.947891]: Expend Buffer: false [1970-Jan-01 00:13:55.997542]: Syncing turned true [1970-Jan-01 00:13:56.056791]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-01 00:13:56.058474]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-01 00:13:56.266621]: Toolhead 0 ADC Error: 1 [1970-Jan-01 00:13:57.234523]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-01 00:13:57.236857]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-01 00:13:57.238790]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-01 00:13:57.240644]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-01 00:13:57.242343]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-01 00:13:57.244124]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-01 00:13:58.160936]: Expend Buffer: false [1970-Jan-01 00:14:08.477135]: toolhead pausing [1970-Jan-01 00:14:08.479000]: Toolhead 0 : Retry: Waited 1.48968s from state change [1970-Jan-01 00:14:08.488044]: Last sync period had (0,96,1191) buffer fulls due to suspend moves [1970-Jan-01 00:14:08.489807]: Syncing turned false [1970-Jan-01 00:14:08.491734]: quack pause: true [1970-Jan-01 00:14:08.508747]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-01 00:14:08.536107]: axis running: 0 [1970-Jan-01 00:14:08.709587]: axis running: 0 [1970-Jan-01 00:14:08.798404]: axis running: 0 [1970-Jan-01 00:14:08.868983]: axis running: 0 [1970-Jan-01 00:14:08.929697]: axis running: 0 [1970-Jan-01 00:14:09.000378]: axis running: 0 [1970-Jan-01 00:14:09.091552]: Last sync period had (0,96,1191) buffer fulls due to suspend moves [1970-Jan-01 00:14:09.094110]: Libstepper All Axis Abort [1970-Jan-01 00:14:09.095830]: Clear Toolhead Buffer [1970-Jan-01 00:14:09.133076]: clear toolhead buffer acknowledged [1970-Jan-01 00:14:09.220966]: toolhead unpausing [1970-Jan-01 00:14:09.222723]: quack pause: false [1970-Jan-01 00:14:09.322427]: Expend Buffer: true [1970-Jan-01 00:14:09.373617]: Last sync period had (0,96,1209) buffer fulls due to suspend moves [1970-Jan-01 00:14:09.375851]: Syncing turned false [1970-Jan-01 00:14:09.455245]: Toolhead 0 ADC Error: 0 [1970-Jan-01 00:14:09.487167]: GAP: Query->Await [1970-Jan-01 00:14:09.542758]: TH0: Retreived step position 14221583 [1970-Jan-01 00:14:09.566978]: wait for PRU status in get position [1970-Jan-01 00:14:09.568690]: wait for PRU status in get position [1970-Jan-01 00:14:09.570506]: GAP: Await->Done(Query) [1970-Jan-01 00:14:09.699003]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:14:09.705091]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:14:10.588080]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:14:15.764307]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:14:21.036217]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:14:22.523094]: Last sync period had (0,96,2034) buffer fulls due to suspend moves [1970-Jan-01 00:14:22.524879]: Syncing turned false [1970-Jan-01 00:14:22.526758]: TH0: 64 failures in last 3170 packets (2.01893%) [1970-Jan-01 00:14:22.528742]: Toolhead Abort [1970-Jan-01 00:14:22.540733]: aborting pru with shutdown=true [1970-Jan-01 00:14:22.550486]: Last sync period had (0,96,2034) buffer fulls due to suspend moves [1970-Jan-01 00:14:22.552378]: Libstepper All Axis Abort [1970-Jan-01 00:14:22.553990]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:14:22.555656]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:14:22.649021]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:14:22.661217]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:14:22.749557]: Commanding stats update: Retract count: 712 [1970-Jan-01 00:14:22.751594]: Toolhead 0 marked as possibly blocking! [1970-Jan-01 00:14:22.892567]: Toolhead 0 done blocking! [1970-Jan-01 00:14:23.041687]: GetToolUsageStats called in machine state 0 [1970-Jan-01 00:14:23.043412]: Commanding tool usage stat retrieve [1970-Jan-01 00:14:23.045160]: GetToolUsageState: Proceeds to 1 [1970-Jan-01 00:14:23.046797]: GetToolUsagState: Error from retrieve: 0x10a [1970-Jan-01 00:14:23.080884]: Raw usage stats: retract 1420ct, extrusion 469522 steps, 1575 seconds, refurbed 0 times [1970-Jan-01 00:14:23.148808]: GetToolUsageStats called in machine state 1 [1970-Jan-01 00:14:23.150723]: VerifyToolUsageStatsRetrieved: Done [1970-Jan-01 00:14:23.153145]: GetToolUsageState: Proceeds to 2 [1970-Jan-01 00:14:23.211584]: GetToolUsageStats called in machine state 2 [1970-Jan-01 00:14:23.213416]: GetToolUsageState: Done, resets [1970-Jan-01 00:15:13.033376]: Toolhead 0 state error: 80 [1970-Jan-01 00:15:31.167837]: Toolhead 0 state error: 0 [1970-Jan-01 00:15:36.019726]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 00:15:36.022639]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:15:37.277084]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:16:21.898279]: Toolhead 0 state error: 80 [1970-Jan-01 00:16:30.700918]: Toolhead 0 state error: 0 [1970-Jan-01 00:16:58.199930]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:02.854981]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:07.494490]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:12.052239]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:16.545207]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:21.119177]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:25.631448]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:30.151786]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:34.719622]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:39.220884]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:40.429246]: wait for axis 0 full: false offset: 90 l3map offset: 90 status: 1 position -9743 status count 1001 [1970-Jan-01 00:17:43.705532]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:46.600952]: Raw HES proceeding [1970-Jan-01 00:17:46.634400]: Got raw val 24130, saturated: true [1970-Jan-01 00:17:46.658845]: Returning HES [1970-Jan-01 00:17:46.670931]: Sending back val 24130, saturated true [1970-Jan-01 00:17:46.767590]: Toolhead Abort [1970-Jan-01 00:17:46.769416]: aborting pru with shutdown=true [1970-Jan-01 00:17:46.782593]: Last sync period had (0,96,11829) buffer fulls due to suspend moves [1970-Jan-01 00:17:46.784351]: Libstepper All Axis Abort [1970-Jan-01 00:17:48.503617]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 00:17:48.505365]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:17:49.795259]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:17:54.586862]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:17:59.016773]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:03.523343]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:08.074297]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:12.622743]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:17.171878]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:21.720814]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:26.240351]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:30.776551]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:35.284993]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:36.576284]: wait for axis 0 full: false offset: 90 l3map offset: 90 status: 1 position -9743 status count 1001 [1970-Jan-01 00:18:39.879608]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:43.022132]: Raw HES proceeding [1970-Jan-01 00:18:43.065346]: Got raw val 24114, saturated: true [1970-Jan-01 00:18:43.088971]: Returning HES [1970-Jan-01 00:18:43.101053]: Sending back val 24114, saturated true [1970-Jan-01 00:18:43.197212]: Toolhead Abort [1970-Jan-01 00:18:43.198916]: aborting pru with shutdown=true [1970-Jan-01 00:18:43.211972]: Last sync period had (0,96,15471) buffer fulls due to suspend moves [1970-Jan-01 00:18:43.213706]: Libstepper All Axis Abort [1970-Jan-01 00:18:44.875834]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 00:18:44.877591]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:18:46.111483]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:18:50.798738]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:18:57.271904]: Raw HES proceeding [1970-Jan-01 00:18:57.362633]: Got raw val 24109, saturated: true [1970-Jan-01 00:18:57.390762]: Returning HES [1970-Jan-01 00:18:57.392483]: Sending back val 24109, saturated true [1970-Jan-01 00:18:57.494621]: Toolhead Abort [1970-Jan-01 00:18:57.496355]: aborting pru with shutdown=true [1970-Jan-01 00:18:57.511653]: Last sync period had (0,96,16095) buffer fulls due to suspend moves [1970-Jan-01 00:18:57.513441]: Libstepper All Axis Abort [1970-Jan-01 00:18:59.175983]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:18:59.178038]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:19:01.982659]: Toolhead 0 state error: 80 [1970-Jan-01 00:19:05.511959]: Toolhead 0 state error: 54 [1970-Jan-01 00:19:05.513704]: Tool UID becomes 0. [1970-Jan-01 00:19:35.285721]: GetCachedToolUsageStats called [1970-Jan-01 00:19:35.406464]: GetCachedToolUsageStats called [1970-Jan-01 00:19:37.088700]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:19:37.764622]: Toolhead 0 state error: 80 [1970-Jan-01 00:19:37.766327]: Checking tool eeprom version [1970-Jan-01 00:19:37.768778]: Commanding tool usage stat retrieve [1970-Jan-01 00:19:37.770644]: New tool uid 0x143c6 attached, updating info cache [1970-Jan-01 00:19:37.804636]: Last sync period had (0,96,16425) buffer fulls due to suspend moves [1970-Jan-01 00:19:37.806566]: Syncing turned false [1970-Jan-01 00:19:37.808329]: Toolhead Abort [1970-Jan-01 00:19:37.816776]: aborting pru with shutdown=true [1970-Jan-01 00:19:37.819371]: Last sync period had (0,96,16425) buffer fulls due to suspend moves [1970-Jan-01 00:19:37.821438]: Libstepper All Axis Abort [1970-Jan-01 00:19:37.823043]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:19:37.825037]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:19:37.826985]: Commanding tool usage stat retrieve [1970-Jan-01 00:19:37.881932]: Commanding tool usage stat retrieve [1970-Jan-01 00:19:37.910842]: Commanding tool usage stat retrieve [1970-Jan-01 00:19:37.958289]: Commanding tool usage stat retrieve [1970-Jan-01 00:19:40.752277]: Raw usage stats: retract 708ct, extrusion 245605 steps, 1205 seconds, refurbed 0 times [1970-Jan-01 00:19:42.251170]: Raw usage stats: retract 708ct, extrusion 245605 steps, 1205 seconds, refurbed 0 times [1970-Jan-01 00:19:43.758091]: Raw usage stats: retract 708ct, extrusion 245605 steps, 1205 seconds, refurbed 0 times [1970-Jan-01 00:19:45.264513]: Raw usage stats: retract 708ct, extrusion 245605 steps, 1205 seconds, refurbed 0 times [1970-Jan-01 00:20:07.879043]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-01 00:20:07.881279]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:20:08.015091]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:22:34.212173]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Jan-01 00:22:34.214264]: Load Sense Limit Method: 1 [1970-Jan-01 00:22:34.217194]: CLEAR BUFFER FAIL! in libstepper::Abort() [1970-Jan-01 00:22:34.223913]: Last sync period had (0,96,28995) buffer fulls due to suspend moves [1970-Jan-01 00:22:34.225707]: Libstepper All Axis Abort [1970-Jan-01 00:22:36.789728]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:22:40.459044]: HOME: 1 homing: Limit Detected!: [1970-Jan-01 00:22:40.461192]: Toolhead Abort [1970-Jan-01 00:22:40.462906]: aborting pru with shutdown=true [1970-Jan-01 00:22:40.465448]: Last sync period had (0,96,29451) buffer fulls due to suspend moves [1970-Jan-01 00:22:40.467306]: Libstepper All Axis Abort [1970-Jan-01 00:22:40.514703]: HOME: 1 homing: Limit Detected!: [1970-Jan-01 00:22:41.578334]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:22:42.342654]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Jan-01 00:22:42.344628]: Load Sense Limit Method: 0 [1970-Jan-01 00:22:42.348725]: Last sync period had (0,96,29586) buffer fulls due to suspend moves [1970-Jan-01 00:22:42.350696]: Libstepper All Axis Abort [1970-Jan-01 00:22:46.040347]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:22:50.091693]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:22:54.315975]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:22:56.193075]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:22:56.194862]: Toolhead Abort [1970-Jan-01 00:22:56.196714]: aborting pru with shutdown=true [1970-Jan-01 00:22:56.210829]: Last sync period had (0,96,30633) buffer fulls due to suspend moves [1970-Jan-01 00:22:56.212598]: Libstepper All Axis Abort [1970-Jan-01 00:22:56.239676]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:22:56.266484]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:22:56.323302]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:22:56.860404]: HOME: wait for buffer empty [1970-Jan-01 00:22:56.920921]: HOME: wait for buffer empty [1970-Jan-01 00:22:56.979482]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.008859]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.058559]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.096370]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.121067]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.153970]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.197716]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.229758]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.254089]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.301775]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.350413]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.375405]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.400676]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.453885]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.508211]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.542685]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.580369]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.628057]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.653165]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.692751]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.733424]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.766201]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.796155]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.839147]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.884711]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.915675]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.939598]: HOME: wait for buffer empty [1970-Jan-01 00:22:57.992401]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.051377]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.085813]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.126509]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.162896]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.187613]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.231357]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.275839]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.302139]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.374796]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.439189]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.490545]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.519400]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.596279]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.622955]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.646173]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.671782]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.731507]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.757718]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.787136]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.817601]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.871719]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.895776]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.920793]: HOME: wait for buffer empty [1970-Jan-01 00:22:58.965665]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Jan-01 00:22:59.279640]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:03.146598]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:06.983950]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:10.883207]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:14.675640]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:18.501099]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:20.603654]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:23:20.605559]: Toolhead Abort [1970-Jan-01 00:23:20.607256]: aborting pru with shutdown=false [1970-Jan-01 00:23:20.609724]: Last sync period had (0,96,32625) buffer fulls due to suspend moves [1970-Jan-01 00:23:20.611679]: Libstepper All Axis Abort [1970-Jan-01 00:23:20.655542]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:23:22.507309]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:23.099941]: GAP: Query->Await [1970-Jan-01 00:23:23.141197]: GAP: Await [1970-Jan-01 00:23:23.180764]: GAP: Await [1970-Jan-01 00:23:23.207242]: TH0: Retreived step position 11665679 [1970-Jan-01 00:23:23.223374]: wait for PRU status in get position [1970-Jan-01 00:23:23.225011]: wait for PRU status in get position [1970-Jan-01 00:23:23.226607]: GAP: Await->Done(Query) [1970-Jan-01 00:23:23.269376]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7) [1970-Jan-01 00:23:23.342880]: Syncing turned true [1970-Jan-01 00:23:23.354197]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-01 00:23:23.461589]: Toolhead 0 commands idle [1970-Jan-01 00:23:23.537383]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-01 00:23:23.710901]: Toolhead 0 ADC Error: 1 [1970-Jan-01 00:23:23.790508]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-01 00:23:23.792263]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-01 00:23:23.793908]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-01 00:23:23.795999]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-01 00:23:23.797649]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-01 00:23:23.801527]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-01 00:23:26.944269]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:30.663172]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:30.837273]: Buffer stall ongoing: 645 [1970-Jan-01 00:23:30.871848]: Buffer stall ongoing: 7998 [1970-Jan-01 00:23:30.897462]: Buffer stall ongoing: 13416 [1970-Jan-01 00:23:30.941952]: Buffer stall ongoing: 22833 [1970-Jan-01 00:23:30.989278]: Buffer stall ongoing: 32895 [1970-Jan-01 00:23:31.005774]: Last sync period had (0,0,657) buffer fulls due to suspend moves [1970-Jan-01 00:23:31.007563]: Syncing turned false [1970-Jan-01 00:23:31.018007]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-01 00:23:31.019909]: Buffer stall ongoing: 36765 [1970-Jan-01 00:23:32.058870]: HES logged: false [1970-Jan-01 00:23:32.135918]: HES logged: false [1970-Jan-01 00:23:32.225440]: HES logged: false [1970-Jan-01 00:23:32.262298]: HES logged: false [1970-Jan-01 00:23:32.302720]: HES logged: false [1970-Jan-01 00:23:32.354278]: HES logged: false [1970-Jan-01 00:23:32.385545]: HES logged: false [1970-Jan-01 00:23:32.411410]: HES logged: false [1970-Jan-01 00:23:32.450382]: HES logged: false [1970-Jan-01 00:23:32.496545]: HES logged: false [1970-Jan-01 00:23:32.527698]: HES logged: false [1970-Jan-01 00:23:32.553171]: HES logged: false [1970-Jan-01 00:23:32.602508]: HES logged: false [1970-Jan-01 00:23:32.641756]: HES logged: false [1970-Jan-01 00:23:32.667238]: HES logged: false [1970-Jan-01 00:23:32.740733]: HES logged: false [1970-Jan-01 00:23:32.779023]: HES logged: false [1970-Jan-01 00:23:32.806051]: HES logged: false [1970-Jan-01 00:23:32.858120]: HES logged: false [1970-Jan-01 00:23:32.900000]: HES logged: false [1970-Jan-01 00:23:32.926400]: HES logged: false [1970-Jan-01 00:23:32.960563]: HES logged: false [1970-Jan-01 00:23:33.000825]: HES logged: false [1970-Jan-01 00:23:33.045757]: HES logged: false [1970-Jan-01 00:23:33.071145]: HES logged: false [1970-Jan-01 00:23:33.114718]: HES logged: false [1970-Jan-01 00:23:33.157668]: HES logged: false [1970-Jan-01 00:23:33.183531]: HES logged: false [1970-Jan-01 00:23:33.246006]: HES logged: false [1970-Jan-01 00:23:33.293670]: HES logged: false [1970-Jan-01 00:23:33.319677]: HES logged: false [1970-Jan-01 00:23:33.354911]: HES logged: false [1970-Jan-01 00:23:33.403047]: HES logged: false [1970-Jan-01 00:23:33.436782]: HES logged: false [1970-Jan-01 00:23:33.463029]: HES logged: false [1970-Jan-01 00:23:33.506218]: HES logged: false [1970-Jan-01 00:23:33.553082]: HES logged: false [1970-Jan-01 00:23:33.580820]: HES logged: false [1970-Jan-01 00:23:33.654045]: HES logged: false [1970-Jan-01 00:23:33.704098]: HES logged: false [1970-Jan-01 00:23:33.795977]: HES logged: false [1970-Jan-01 00:23:33.829159]: HES logged: false [1970-Jan-01 00:23:33.886040]: HES logged: false [1970-Jan-01 00:23:33.915944]: HES logged: false [1970-Jan-01 00:23:33.941389]: HES logged: false [1970-Jan-01 00:23:33.995441]: HES logged: false [1970-Jan-01 00:23:34.029551]: HES logged: false [1970-Jan-01 00:23:34.059756]: HES logged: false [1970-Jan-01 00:23:34.101234]: HES logged: false [1970-Jan-01 00:23:34.150687]: HES logged: false [1970-Jan-01 00:23:34.177170]: HES logged: false [1970-Jan-01 00:23:34.203709]: HES logged: false [1970-Jan-01 00:23:34.252260]: HES logged: false [1970-Jan-01 00:23:34.291032]: HES logged: false [1970-Jan-01 00:23:34.352117]: HES logged: false [1970-Jan-01 00:23:34.389902]: HES logged: false [1970-Jan-01 00:23:34.428808]: HES logged: false [1970-Jan-01 00:23:34.458429]: HES logged: false [1970-Jan-01 00:23:34.504416]: HES logged: false [1970-Jan-01 00:23:34.547811]: HES logged: false [1970-Jan-01 00:23:34.578395]: HES logged: false [1970-Jan-01 00:23:34.612181]: HES logged: false [1970-Jan-01 00:23:34.656717]: HES logged: true [1970-Jan-01 00:23:36.211058]: Toolhead 0 ADC Error: 0 [1970-Jan-01 00:23:38.533257]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:42.259864]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:46.286733]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:50.114125]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:23:51.944539]: Toolhead Abort [1970-Jan-01 00:23:51.947752]: aborting pru with shutdown=true [1970-Jan-01 00:23:51.950641]: CLEAR BUFFER FAIL! in libstepper::Abort() [1970-Jan-01 00:23:51.953138]: Last sync period had (0,0,2304) buffer fulls due to suspend moves [1970-Jan-01 00:23:51.955021]: Libstepper All Axis Abort [1970-Jan-01 00:23:52.038711]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:23:52.040676]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:24:22.881986]: GetCachedToolUsageStats called [1970-Jan-01 00:24:23.055947]: GetCachedToolUsageStats called [1970-Jan-01 00:24:25.119014]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 00:24:25.122830]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:24:26.364843]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:24:30.098063]: Toolhead 0 state error: 0 [1970-Jan-01 00:25:57.542457]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:26:02.020327]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:26:06.487445]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:26:11.029297]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:26:15.594784]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:26:18.894492]: Raw HES proceeding [1970-Jan-01 00:26:18.955483]: Got raw val 23005, saturated: true [1970-Jan-01 00:26:19.072030]: Returning HES [1970-Jan-01 00:26:19.073700]: Sending back val 23005, saturated true [1970-Jan-01 00:26:19.172932]: Toolhead Abort [1970-Jan-01 00:26:19.174663]: aborting pru with shutdown=true [1970-Jan-01 00:26:19.191557]: Last sync period had (0,0,10809) buffer fulls due to suspend moves [1970-Jan-01 00:26:19.193335]: Libstepper All Axis Abort [1970-Jan-01 00:26:25.956949]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:26:25.958711]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:28:39.379320]: Last sync period had (0,0,11469) buffer fulls due to suspend moves [1970-Jan-01 00:28:39.391456]: Syncing turned false [1970-Jan-01 00:28:39.393332]: Toolhead Abort [1970-Jan-01 00:28:39.395048]: aborting pru with shutdown=true [1970-Jan-01 00:28:39.397751]: Last sync period had (0,0,11469) buffer fulls due to suspend moves [1970-Jan-01 00:28:39.399601]: Libstepper All Axis Abort [1970-Jan-01 00:28:39.401538]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:28:39.403263]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:28:39.562883]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 00:28:39.564667]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:28:39.663715]: Commanding stats update: Retract count: 708 [1970-Jan-01 00:28:39.665440]: Toolhead 0 marked as possibly blocking! [1970-Jan-01 00:28:39.852203]: Toolhead 0 done blocking! [1970-Jan-01 00:28:40.052949]: GetToolUsageStats called in machine state 0 [1970-Jan-01 00:28:40.054832]: Commanding tool usage stat retrieve [1970-Jan-01 00:28:40.056479]: GetToolUsageState: Proceeds to 1 [1970-Jan-01 00:28:40.058847]: GetToolUsagState: Error from retrieve: 0x10a [1970-Jan-01 00:28:40.093425]: Raw usage stats: retract 1416ct, extrusion 278170 steps, 1254 seconds, refurbed 0 times [1970-Jan-01 00:28:40.126768]: GetToolUsageStats called in machine state 1 [1970-Jan-01 00:28:40.128581]: VerifyToolUsageStatsRetrieved: Done [1970-Jan-01 00:28:40.140613]: GetToolUsageState: Proceeds to 2 [1970-Jan-01 00:28:40.183911]: GetToolUsageStats called in machine state 2 [1970-Jan-01 00:28:40.185706]: GetToolUsageState: Done, resets [1970-Jan-01 00:29:55.715808]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-01 00:29:55.717579]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:29:56.592939]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false [1970-Jan-01 00:29:56.594872]: Load Sense Limit Method: 1 [1970-Jan-01 00:29:56.597417]: Last sync period had (0,0,16065) buffer fulls due to suspend moves [1970-Jan-01 00:29:56.599141]: Libstepper All Axis Abort [1970-Jan-01 00:29:59.999069]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:03.172260]: HOME: 1 homing: Limit Detected!: [1970-Jan-01 00:30:03.174302]: Toolhead Abort [1970-Jan-01 00:30:03.176044]: aborting pru with shutdown=true [1970-Jan-01 00:30:03.178725]: Last sync period had (0,0,16494) buffer fulls due to suspend moves [1970-Jan-01 00:30:03.180738]: Libstepper All Axis Abort [1970-Jan-01 00:30:03.256626]: HOME: 1 homing: Limit Detected!: [1970-Jan-01 00:30:05.112021]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false [1970-Jan-01 00:30:05.113975]: Load Sense Limit Method: 0 [1970-Jan-01 00:30:05.116672]: Last sync period had (0,0,16617) buffer fulls due to suspend moves [1970-Jan-01 00:30:05.118426]: Libstepper All Axis Abort [1970-Jan-01 00:30:05.574727]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:10.297365]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:15.348781]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:19.167056]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:30:19.168843]: Toolhead Abort [1970-Jan-01 00:30:19.170730]: aborting pru with shutdown=true [1970-Jan-01 00:30:19.173314]: Last sync period had (0,0,17547) buffer fulls due to suspend moves [1970-Jan-01 00:30:19.175039]: Libstepper All Axis Abort [1970-Jan-01 00:30:19.228478]: HOME: 0 homing: Limit Detected!: [1970-Jan-01 00:30:20.621212]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:21.932463]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false [1970-Jan-01 00:30:24.934025]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:29.102389]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:33.168972]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:37.341377]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:41.413392]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:43.553775]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:30:43.555567]: Toolhead Abort [1970-Jan-01 00:30:43.557257]: aborting pru with shutdown=false [1970-Jan-01 00:30:43.569185]: Last sync period had (0,0,19404) buffer fulls due to suspend moves [1970-Jan-01 00:30:43.571174]: Libstepper All Axis Abort [1970-Jan-01 00:30:43.601294]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:30:44.035078]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true [1970-Jan-01 00:30:44.379283]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:44.640944]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:44.897727]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:45.145584]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:45.399545]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:45.649750]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:45.910722]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:46.157883]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:46.419925]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:46.667654]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:46.823685]: wait for axis 0 full: false offset: 108 l3map offset: 126 status: 1 position -4235 status count 1001 [1970-Jan-01 00:30:46.925342]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:47.174368]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:47.430782]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:47.684391]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:47.949730]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:30:48.136691]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:30:48.138475]: Toolhead Abort [1970-Jan-01 00:30:48.140383]: aborting pru with shutdown=false [1970-Jan-01 00:30:48.142938]: Last sync period had (0,0,19452) buffer fulls due to suspend moves [1970-Jan-01 00:30:48.144665]: Libstepper All Axis Abort [1970-Jan-01 00:30:48.214375]: HOME: 2 homing: Limit Detected!: [1970-Jan-01 00:30:48.411324]: GAP: Query->Await [1970-Jan-01 00:30:48.424481]: TH0: Retreived step position 9306383 [1970-Jan-01 00:30:48.440934]: wait for PRU status in get position [1970-Jan-01 00:30:48.442577]: wait for PRU status in get position [1970-Jan-01 00:30:48.444170]: GAP: Await->Done(Query) [1970-Jan-01 00:30:48.646144]: Heater manager Set Target Temperature to 180, index 0 [1970-Jan-01 00:30:48.647877]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:30:49.242567]: Expecting 234112 steps extruded this print from 2156.72 mm of plastic [1970-Jan-01 00:30:49.392630]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 00:30:49.394386]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 00:30:49.522678]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 00:32:44.628912]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 00:32:49.400297]: Expend Buffer: false [1970-Jan-01 00:32:49.504332]: Syncing turned true [1970-Jan-01 00:32:49.590464]: PRU Event: PRU_SYNC_ON(7) [1970-Jan-01 00:32:49.592201]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jan-01 00:32:49.670958]: Toolhead 0 ADC Error: 1 [1970-Jan-01 00:32:50.331974]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jan-01 00:32:50.333940]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jan-01 00:32:50.335623]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jan-01 00:32:50.337280]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jan-01 00:32:50.338924]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jan-01 00:32:50.340807]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jan-01 00:32:50.976321]: Expected packet id: 0x91, Got packet id: 0x90, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x72,0x7e,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x5,0x84,0x0,0x90,0x16,0x49,0x99,0x20, [1970-Jan-01 00:32:50.978187]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:32:51.363633]: Expected packet id: 0xcd, Got packet id: 0xcc, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x72,0xef,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x4,0x35,0x0,0xcc,0x56,0x5,0x14,0xbf, [1970-Jan-01 00:32:51.365485]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:35:08.230788]: Steps overrun! last 65534 and just got 19 [1970-Jan-01 00:35:08.232435]: calculated 20 [1970-Jan-01 00:35:54.289082]: Expected packet id: 0xb5, Got packet id: 0xb4, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xda,0x0,0xf,0x28,0x2f,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xad,0x0,0xb4,0xed,0xc4,0xee,0xf0, [1970-Jan-01 00:35:54.291172]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:35:54.296049]: Expected packet id: 0xb5, Got packet id: 0xb4, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xda,0x0,0xf,0x28,0x2f,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xad,0x0,0xb4,0xed,0xc4,0xee,0xf0, [1970-Jan-01 00:35:54.297903]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:36:12.307473]: Expected packet id: 0x57, Got packet id: 0x56, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x35,0x20,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x3,0x88,0x0,0x56,0xec,0xfb,0xa6,0x8f, [1970-Jan-01 00:36:12.309312]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:36:17.925020]: Expected packet id: 0x38, Got packet id: 0x37, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x39,0xd,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x20,0x0,0x37,0xf2,0xc6,0x2,0x6, [1970-Jan-01 00:36:17.926861]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:36:20.001076]: Expected packet id: 0xa5, Got packet id: 0xa4, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x3a,0xe8,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x79,0x0,0xa4,0x20,0xaf,0x30,0xbe, [1970-Jan-01 00:36:20.002980]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:36:27.417710]: Expected packet id: 0xf8, Got packet id: 0xf7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x41,0x6c,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x74,0x0,0xf7,0xcf,0xaf,0x5c,0x85, [1970-Jan-01 00:36:27.423783]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:36:41.480233]: Expected packet id: 0x12, Got packet id: 0x11, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x4d,0xa4,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x13,0x0,0x11,0x5d,0x46,0xda,0x1a, [1970-Jan-01 00:36:41.482109]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:36:44.018216]: Expected packet id: 0x7e, Got packet id: 0x7d, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x4f,0xe1,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x3,0x81,0x0,0x7d,0x3a,0x2c,0xf8,0x8f, [1970-Jan-01 00:36:44.021120]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:36:53.617602]: Expected packet id: 0x3e, Got packet id: 0x3d, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x58,0x41,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x11,0x0,0x3d,0xd0,0x18,0x53,0xab, [1970-Jan-01 00:36:53.619476]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:36:57.791251]: Expected packet id: 0x1, Got packet id: 0x0, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0x5b,0xf3,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x62,0x0,0x0,0x64,0x8,0xe8,0xd, [1970-Jan-01 00:36:57.793080]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:37:00.338469]: Expected packet id: 0x69, Got packet id: 0x68, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0x5d,0xfc,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x51,0x0,0x68,0xc6,0xf0,0x51,0xb5, [1970-Jan-01 00:37:00.340522]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:37:00.345417]: Expected packet id: 0x69, Got packet id: 0x68, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd3,0x0,0xf,0x5d,0xfc,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x51,0x0,0x68,0xc6,0xf0,0x51,0xb5, [1970-Jan-01 00:37:00.347268]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:37:13.289508]: Expected packet id: 0x12, Got packet id: 0x11, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x65,0xb8,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xc9,0x0,0x11,0xa9,0x11,0x25,0x9d, [1970-Jan-01 00:37:13.291584]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:37:45.969857]: Expected packet id: 0xba, Got packet id: 0xb9, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x7a,0x1a,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0x66,0x0,0xb9,0x5d,0xac,0x4d,0x95, [1970-Jan-01 00:37:45.971920]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:38:26.871142]: Expected packet id: 0x15, Got packet id: 0x14, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xa9,0x0,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x28,0x0,0x14,0xc1,0x61,0xd4,0x4b, [1970-Jan-01 00:38:26.872993]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:38:35.251340]: Expected packet id: 0xd6, Got packet id: 0xd5, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xac,0xa7,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x12,0x0,0xd5,0x42,0x49,0xbb,0x5a, [1970-Jan-01 00:38:35.253232]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:38:42.084116]: Expected packet id: 0x39, Got packet id: 0x38, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xaf,0xc5,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xa4,0x0,0x38,0xed,0xb0,0x76,0x3a, [1970-Jan-01 00:38:42.090292]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:38:48.337746]: Expected packet id: 0x92, Got packet id: 0x91, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb2,0x70,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xda,0x0,0x91,0xad,0x1f,0x46,0xd8, [1970-Jan-01 00:38:48.339638]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:38:52.490894]: Expected packet id: 0x80, Got packet id: 0x7f, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xb4,0x25,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x6c,0x0,0x7f,0x54,0xee,0x26,0x9c, [1970-Jan-01 00:38:52.492746]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:06.375004]: Expected packet id: 0x19, Got packet id: 0x18, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xbd,0xa5,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xb5,0x0,0x18,0xfc,0xbe,0x3,0xa8, [1970-Jan-01 00:39:06.376869]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:11.113838]: Expected packet id: 0x98, Got packet id: 0x97, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xc0,0xa4,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x30,0x0,0x97,0xc8,0x36,0x99,0xbf, [1970-Jan-01 00:39:11.115685]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:13.110959]: Expected packet id: 0xeb, Got packet id: 0xea, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xc2,0x2d,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x95,0x0,0xea,0xf,0x11,0x5f,0xd1, [1970-Jan-01 00:39:13.112801]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:13.179649]: Expected packet id: 0xf9, Got packet id: 0xf8, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xc2,0x41,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x15,0x0,0xf8,0x2e,0x64,0xd8,0x27, [1970-Jan-01 00:39:13.181711]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:29.800983]: Expected packet id: 0xce, Got packet id: 0xcd, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xcd,0xc4,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xaa,0x0,0xcd,0x83,0x47,0x53,0xb, [1970-Jan-01 00:39:29.802827]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:34.699892]: Expected packet id: 0xbe, Got packet id: 0xbd, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xd1,0x4f,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x6e,0x0,0xbd,0xfe,0x4e,0xae,0x7c, [1970-Jan-01 00:39:34.701974]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:35.050553]: Expected packet id: 0xe5, Got packet id: 0xe4, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xd1,0xb2,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x2e,0x0,0xe4,0xf1,0x2b,0x44,0xd0, [1970-Jan-01 00:39:35.052482]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:35.388342]: Expected packet id: 0xa, Got packet id: 0x9, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xd2,0x1d,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x3c,0x0,0x9,0x60,0x91,0xd8,0x4b, [1970-Jan-01 00:39:35.390466]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:35.442468]: Expected packet id: 0x17, Got packet id: 0x16, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xd2,0x2d,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x4c,0x0,0x16,0x8c,0xae,0xf0,0xf0, [1970-Jan-01 00:39:35.445257]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:35.450301]: Expected packet id: 0x17, Got packet id: 0x16, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xd2,0x2d,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x4c,0x0,0x16,0x8c,0xae,0xf0,0xf0, [1970-Jan-01 00:39:35.452201]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:39:35.747101]: Expected packet id: 0x3c, Got packet id: 0x3b, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xd2,0x2d,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x0,0x0,0x0,0x1,0x2d,0xf5,0x0,0x3b,0xa0,0x6c,0x37,0xd7, [1970-Jan-01 00:39:35.748967]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:44.430620]: Expected packet id: 0x9, Got packet id: 0x8, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xd5,0x3a,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x65,0x0,0x8,0x14,0x93,0x75,0xc7, [1970-Jan-01 00:39:44.432486]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:46.722661]: Expected packet id: 0x89, Got packet id: 0x88, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xd7,0x58,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xb4,0x0,0x88,0xa0,0x96,0x43,0xa1, [1970-Jan-01 00:39:46.724553]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:46.729734]: Expected packet id: 0x89, Got packet id: 0x88, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xd7,0x58,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xb4,0x0,0x88,0xa0,0x96,0x43,0xa1, [1970-Jan-01 00:39:46.731802]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:39:52.223536]: Expected packet id: 0xc2, Got packet id: 0xc1, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xdb,0xa3,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x67,0x0,0xc1,0xcd,0x47,0x35,0xd5, [1970-Jan-01 00:39:52.230537]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:55.721979]: Expected packet id: 0x8e, Got packet id: 0x8d, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xdd,0xe6,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xd8,0x0,0x8d,0xfd,0x8e,0xa6,0x8c, [1970-Jan-01 00:39:55.723822]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:57.842369]: Expected packet id: 0xf7, Got packet id: 0xf6, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xdf,0xbc,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x9f,0x0,0xf6,0xa6,0x1d,0x2f,0xa7, [1970-Jan-01 00:39:57.844283]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:57.849412]: Expected packet id: 0xf7, Got packet id: 0xf6, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xdf,0xbc,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x9f,0x0,0xf6,0xa6,0x1d,0x2f,0xa7, [1970-Jan-01 00:39:57.851513]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:39:58.278131]: Expected packet id: 0x1d, Got packet id: 0x1c, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe0,0x22,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0xd,0x0,0x1c,0x29,0xd7,0xfe,0x17, [1970-Jan-01 00:39:58.279986]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:39:58.285074]: Expected packet id: 0x1d, Got packet id: 0x1c, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe0,0x22,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0xd,0x0,0x1c,0x29,0xd7,0xfe,0x17, [1970-Jan-01 00:39:58.286915]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:40:04.107712]: Expected packet id: 0x37, Got packet id: 0x36, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xe4,0xb1,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x3,0x4b,0x0,0x36,0xc1,0x5c,0xc5,0xa8, [1970-Jan-01 00:40:04.109558]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:40:04.514535]: Expected packet id: 0x73, Got packet id: 0x72, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xe5,0x13,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x4b,0x0,0x72,0xf,0x1e,0x7c,0x3c, [1970-Jan-01 00:40:04.516370]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:40:04.556293]: Expected packet id: 0x7d, Got packet id: 0x7c, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xe5,0x22,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x7,0x0,0x7c,0x73,0x2,0xe8,0xd9, [1970-Jan-01 00:40:04.558134]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:40:04.563172]: Expected packet id: 0x7d, Got packet id: 0x7c, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xe5,0x22,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x7,0x0,0x7c,0x73,0x2,0xe8,0xd9, [1970-Jan-01 00:40:04.564993]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:40:30.377615]: Expected packet id: 0xea, Got packet id: 0xe9, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xfa,0x24,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x6e,0x0,0xe9,0x2e,0x97,0x45,0x7e, [1970-Jan-01 00:40:30.379488]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:40:33.497284]: Expected packet id: 0x63, Got packet id: 0x62, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xfc,0x84,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x83,0x0,0x62,0xcd,0x71,0x6f,0xb4, [1970-Jan-01 00:40:33.499148]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:40:37.023613]: Steps overrun! last 65531 and just got 0 [1970-Jan-01 00:40:37.025288]: calculated 4 [1970-Jan-01 00:40:40.370454]: Expected packet id: 0xc1, Got packet id: 0xc0, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x3,0x8e,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0x90,0x0,0xc0,0x7f,0xa,0xe2,0x47, [1970-Jan-01 00:40:40.372277]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:40:40.377245]: Expected packet id: 0xc1, Got packet id: 0xc0, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x3,0x8e,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0x90,0x0,0xc0,0x7f,0xa,0xe2,0x47, [1970-Jan-01 00:40:40.379078]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:40:44.687052]: Expected packet id: 0x83, Got packet id: 0x82, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x7,0xe7,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x72,0x0,0x82,0x1c,0x95,0xe2,0x6, [1970-Jan-01 00:40:44.688913]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:40:49.543920]: Expected packet id: 0x5d, Got packet id: 0x5c, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xb,0xa0,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x70,0x0,0x5c,0xaa,0x7a,0x93,0x33, [1970-Jan-01 00:40:49.545787]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:40:57.344709]: Expected packet id: 0x91, Got packet id: 0x90, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x11,0x84,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x57,0x0,0x90,0xc5,0x29,0x5a,0x45, [1970-Jan-01 00:40:57.346543]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:41:02.649727]: Expected packet id: 0x74, Got packet id: 0x73, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x16,0x1e,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x42,0x0,0x73,0x4b,0x79,0xb1,0xc4, [1970-Jan-01 00:41:02.651815]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:41:02.716096]: Expected packet id: 0x85, Got packet id: 0x84, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x16,0x47,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0xdc,0x0,0x84,0xd1,0x7d,0x57,0x26, [1970-Jan-01 00:41:02.717953]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:41:06.932502]: Expected packet id: 0x5d, Got packet id: 0x5c, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x1a,0x8f,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x13,0x0,0x5c,0xce,0x8,0xc8,0xab, [1970-Jan-01 00:41:06.938330]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:41:09.010963]: Expected packet id: 0xc7, Got packet id: 0xc6, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x1c,0xd6,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xba,0x0,0xc6,0x2f,0x9e,0x8e,0x85, [1970-Jan-01 00:41:09.012834]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:41:10.503287]: Expected packet id: 0x1f, Got packet id: 0x1e, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x1e,0x48,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xa0,0x0,0x1e,0x61,0xc7,0x71,0x85, [1970-Jan-01 00:41:10.505156]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:41:30.864637]: Expected packet id: 0x68, Got packet id: 0x67, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x2f,0x51,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x84,0x0,0x67,0xbe,0x75,0xda,0x4a, [1970-Jan-01 00:41:30.866556]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:41:36.989287]: Expected packet id: 0x3c, Got packet id: 0x3b, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x32,0x3a,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xef,0x0,0x3b,0x79,0x23,0x76,0xf1, [1970-Jan-01 00:41:36.991726]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:41:45.698742]: Expected packet id: 0x2f, Got packet id: 0x2e, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x39,0x70,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x12,0x0,0x2e,0xfc,0x54,0xf4,0xf7, [1970-Jan-01 00:41:45.700834]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:41:52.761184]: Expected packet id: 0x2b, Got packet id: 0x2a, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x3c,0xda,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0xa1,0x0,0x2a,0xc6,0x88,0x6,0x15, [1970-Jan-01 00:41:52.763051]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:41:59.303050]: Expected packet id: 0x5f, Got packet id: 0x5e, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x41,0xf1,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xc6,0x0,0x5e,0x83,0x91,0x16,0xb3, [1970-Jan-01 00:41:59.304886]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:42:40.567244]: Expected packet id: 0x42, Got packet id: 0x41, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x4c,0x2e,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0x6e,0x0,0x41,0xd9,0xf8,0x48,0x65, [1970-Jan-01 00:42:40.570218]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:42:45.140604]: Expected packet id: 0xb8, Got packet id: 0xb7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x4c,0xef,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x60,0x0,0xb7,0xe3,0x13,0x10,0xb5, [1970-Jan-01 00:42:45.142466]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:43:17.037437]: Expected packet id: 0xcf, Got packet id: 0xce, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x53,0x5d,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0xd7,0x0,0xce,0xb2,0xc2,0x5,0x4, [1970-Jan-01 00:43:17.039312]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:43:36.011401]: Expected packet id: 0xdf, Got packet id: 0xde, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x58,0x31,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xf4,0x0,0xde,0x6b,0xd6,0xe7,0x98, [1970-Jan-01 00:43:36.013262]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:43:36.018104]: Expected packet id: 0xdf, Got packet id: 0xde, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x58,0x31,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xf4,0x0,0xde,0x6b,0xd6,0xe7,0x98, [1970-Jan-01 00:43:36.019948]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:44:32.080753]: Expected packet id: 0xa5, Got packet id: 0xa4, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x68,0x59,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x88,0x0,0xa4,0x1e,0xfa,0x92,0x19, [1970-Jan-01 00:44:32.082611]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:44:34.684576]: Expected packet id: 0x10, Got packet id: 0xf, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x69,0x15,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x70,0xde,0x0,0xf,0x2e,0x19,0xe4,0x4d, [1970-Jan-01 00:44:34.686434]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:45:12.146375]: Expected packet id: 0xbd, Got packet id: 0xbc, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x78,0xb7,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x24,0x0,0xbc,0xb5,0x44,0x82,0x7d, [1970-Jan-01 00:45:12.148229]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:45:12.300265]: Expected packet id: 0xe1, Got packet id: 0xe0, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x78,0xcc,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0x84,0x0,0xe0,0x76,0xd1,0x30,0x53, [1970-Jan-01 00:45:12.302132]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:45:25.490769]: Expected packet id: 0x82, Got packet id: 0x81, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x7c,0x31,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x58,0x0,0x81,0x41,0xbe,0xe2,0x92, [1970-Jan-01 00:45:25.492915]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:45:25.497769]: Expected packet id: 0x82, Got packet id: 0x81, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x7c,0x31,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x58,0x0,0x81,0x41,0xbe,0xe2,0x92, [1970-Jan-01 00:45:25.499634]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:45:31.772887]: Expected packet id: 0x5b, Got packet id: 0x5a, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x7e,0x35,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0x67,0x0,0x5a,0xa3,0xe8,0xae,0xbf, [1970-Jan-01 00:45:31.774738]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:46:07.727630]: Expected packet id: 0xc, Got packet id: 0xb, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x8a,0x66,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x40,0x0,0xb,0x68,0x94,0x1c,0xbf, [1970-Jan-01 00:46:07.729484]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:46:11.931162]: bronx lowest mem space: 0x34a bytes [1970-Jan-01 00:46:27.699899]: Expected packet id: 0x27, Got packet id: 0x26, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd2,0x0,0xf,0x8e,0x9d,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0xe5,0x0,0x26,0x12,0xef,0x5a,0x94, [1970-Jan-01 00:46:27.701950]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:46:27.706794]: Expected packet id: 0x27, Got packet id: 0x26, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd2,0x0,0xf,0x8e,0x9d,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0xe5,0x0,0x26,0x12,0xef,0x5a,0x94, [1970-Jan-01 00:46:27.708644]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:46:51.478531]: Expected packet id: 0x8, Got packet id: 0x7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x97,0xa8,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x75,0x0,0x7,0xe5,0xd5,0x61,0x50, [1970-Jan-01 00:46:51.480567]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:46:51.485410]: Expected packet id: 0x8, Got packet id: 0x7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0x97,0xa8,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x75,0x0,0x7,0xe5,0xd5,0x61,0x50, [1970-Jan-01 00:46:51.487229]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:46:55.180837]: Expected packet id: 0x79, Got packet id: 0x78, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x98,0x82,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x1,0x0,0x78,0x4,0xb3,0x64,0xbc, [1970-Jan-01 00:46:55.182681]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:46:55.236330]: Expected packet id: 0x85, Got packet id: 0x84, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x98,0x8a,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xf1,0x0,0x84,0xb4,0x61,0xd3,0xbb, [1970-Jan-01 00:46:55.238164]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:47:21.181300]: Expected packet id: 0xcf, Got packet id: 0xce, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xa1,0x84,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x6c,0x0,0xce,0xac,0x2b,0x61,0x86, [1970-Jan-01 00:47:21.183170]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:47:24.818144]: Expected packet id: 0x31, Got packet id: 0x30, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xa3,0x35,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x9b,0x0,0x30,0x82,0x5e,0x63,0xda, [1970-Jan-01 00:47:24.819988]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:47:36.581637]: Expected packet id: 0xcd, Got packet id: 0xcc, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xa6,0x5f,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xae,0x0,0xcc,0x29,0xe6,0xab,0xc1, [1970-Jan-01 00:47:36.587602]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:48:27.053932]: Expected packet id: 0xe, Got packet id: 0xd, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xbc,0x51,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x0,0x9d,0x0,0xd,0x97,0xdf,0xf5,0xe9, [1970-Jan-01 00:48:27.055780]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:48:31.847423]: Expected packet id: 0xe1, Got packet id: 0xe0, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xbe,0x83,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x3,0x33,0x0,0xe0,0x3e,0xbc,0xcb,0x39, [1970-Jan-01 00:48:31.849275]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:48:41.714792]: Expected packet id: 0x1c, Got packet id: 0x1b, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xc3,0x84,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xba,0x0,0x1b,0xdb,0x2f,0xb9,0x92, [1970-Jan-01 00:48:41.716635]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:49:23.491059]: Expected packet id: 0xa9, Got packet id: 0xa8, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xd7,0xe3,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0xad,0x0,0xa8,0x3c,0x78,0x32,0xeb, [1970-Jan-01 00:49:23.497276]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:49:34.729353]: Expected packet id: 0xf4, Got packet id: 0xf3, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xdd,0xbb,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0xc,0x0,0xf3,0x18,0x85,0xe7,0x59, [1970-Jan-01 00:49:34.731441]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:49:34.799515]: Expected packet id: 0x6, Got packet id: 0x5, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xdd,0xc6,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x43,0x0,0x5,0x78,0x78,0x4b,0x84, [1970-Jan-01 00:49:34.801599]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:49:37.273981]: Expected packet id: 0x6e, Got packet id: 0x6d, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xde,0xd1,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x17,0x0,0x6d,0xa6,0x71,0xd9,0x9, [1970-Jan-01 00:49:37.275819]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:49:37.314672]: Expected packet id: 0x78, Got packet id: 0x77, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xdf,0xe,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1c,0x80,0x0,0x77,0xe3,0x9f,0xa3,0xbe, [1970-Jan-01 00:49:37.316533]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:49:46.055460]: Expected packet id: 0x33, Got packet id: 0x32, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe2,0xd2,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xcc,0x0,0x32,0xee,0x9f,0x68,0xb4, [1970-Jan-01 00:49:46.057308]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:49:58.491778]: Expected packet id: 0xc, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe8,0x89,0x1, [1970-Jan-01 00:49:58.493632]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:49:58.556753]: Expected packet id: 0x1b, Got packet id: 0x1a, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe8,0x8d,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x41,0x0,0x1a,0x78,0x7,0xa9,0x4f, [1970-Jan-01 00:49:58.558598]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:49:58.869427]: Expected packet id: 0x3c, Got packet id: 0x3b, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe8,0xa1,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x31,0x0,0x3b,0xa6,0xd2,0xb7,0x32, [1970-Jan-01 00:49:58.871847]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:00.064465]: Expected packet id: 0x6c, Got packet id: 0x6b, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe8,0xdc,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x0,0x1e,0x0,0x6b,0x7d,0xe7,0xd6,0x8c, [1970-Jan-01 00:50:00.066344]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:00.383285]: Expected packet id: 0x95, Got packet id: 0x94, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe8,0xf8,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x9b,0x0,0x94,0xb4,0x5d,0x9b,0x2, [1970-Jan-01 00:50:00.385140]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:00.456384]: Expected packet id: 0xa8, Got packet id: 0xa7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xe9,0x8,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xce,0x0,0xa7,0x7d,0x31,0xbe,0xbb, [1970-Jan-01 00:50:00.458226]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:01.644258]: Expected packet id: 0x21, Got packet id: 0x20, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe9,0x56,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x85,0x0,0x20,0x23,0x66,0xe1,0x79, [1970-Jan-01 00:50:01.646123]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:02.511039]: Expected packet id: 0x46, Got packet id: 0x45, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe9,0x96,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0xe7,0x0,0x45,0x3a,0x48,0x38,0xfd, [1970-Jan-01 00:50:02.512893]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:02.630952]: Expected packet id: 0x64, Got packet id: 0x63, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe9,0xa2,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x81,0x0,0x63,0xc0,0xd,0x2d,0xb, [1970-Jan-01 00:50:02.632800]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:02.637696]: Expected packet id: 0x64, Got packet id: 0x63, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe9,0xa2,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x81,0x0,0x63,0xc0,0xd,0x2d,0xb, [1970-Jan-01 00:50:02.639547]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:50:02.886870]: Expected packet id: 0x7b, Got packet id: 0x7a, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xe9,0xe5,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x10,0x51,0x0,0x7a,0xe5,0xb3,0x6a,0xd3, [1970-Jan-01 00:50:02.888724]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:02.932133]: Expected packet id: 0x84, Got packet id: 0x83, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xe9,0xe5,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0xd,0x2d,0x0,0x83,0xde,0x4a,0x3e,0x1d, [1970-Jan-01 00:50:02.933982]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:02.979905]: Expected packet id: 0x90, Got packet id: 0x8f, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe9,0xe5,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x9,0xe1,0x0,0x8f,0x5b,0x58,0x60,0x91, [1970-Jan-01 00:50:02.982020]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:02.986861]: Expected packet id: 0x90, Got packet id: 0x8f, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe9,0xe5,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x9,0xe1,0x0,0x8f,0x5b,0x58,0x60,0x91, [1970-Jan-01 00:50:02.988705]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:50:03.393990]: Expected packet id: 0xab, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0, [1970-Jan-01 00:50:03.395850]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:24.122077]: Expected packet id: 0x4b, Got packet id: 0x4a, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xf3,0x71,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xe4,0x0,0x4a,0xf1,0xeb,0xed,0x85, [1970-Jan-01 00:50:24.123911]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:24.404687]: Expected packet id: 0x68, Got packet id: 0x67, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xf3,0x83,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x24,0x0,0x67,0xb3,0xf0,0x58,0x27, [1970-Jan-01 00:50:24.406564]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:26.943954]: Expected packet id: 0x16, Got packet id: 0xf4, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xf4,0x29,0x1,0x0,0xd7, [1970-Jan-01 00:50:26.945829]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:27.011055]: Expected packet id: 0x28, Got packet id: 0x27, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xf4,0x2d,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x10,0x0,0x27,0x2f,0xe2,0x4a,0xba, [1970-Jan-01 00:50:27.012910]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:27.388061]: Expected packet id: 0x47, Got packet id: 0x46, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xf4,0x46,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xa2,0x0,0x46,0x12,0xf6,0x30,0x1a, [1970-Jan-01 00:50:27.389896]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:27.777225]: Expected packet id: 0x77, Got packet id: 0x76, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0xf4,0x46,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x94,0x0,0x76,0x14,0xc9,0x99,0x94, [1970-Jan-01 00:50:27.779211]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:28.257853]: Expected packet id: 0xca, Got packet id: 0xf5, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd4,0x0,0xf,0xf5,0x62,0x1,0x0,0xd7, [1970-Jan-01 00:50:28.259710]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:40.822869]: Expected packet id: 0x44, Got packet id: 0x43, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xfb,0x87,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x9,0x58,0x0,0x43,0xad,0x46,0x80,0x25, [1970-Jan-01 00:50:40.824806]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:40.829639]: Expected packet id: 0x44, Got packet id: 0x43, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xfb,0x87,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x9,0x58,0x0,0x43,0xad,0x46,0x80,0x25, [1970-Jan-01 00:50:40.831681]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:50:46.562696]: Steps overrun! last 65524 and just got 51 [1970-Jan-01 00:50:46.564427]: calculated 62 [1970-Jan-01 00:50:49.510901]: Expected packet id: 0x88, Got packet id: 0x87, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x2,0x85,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x5d,0x0,0x87,0x41,0x78,0x76,0x4d, [1970-Jan-01 00:50:49.512756]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:50:52.106980]: Expected packet id: 0xf8, Got packet id: 0xf7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x4,0x94,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x1d,0x0,0xf7,0xcc,0xf2,0x7f,0xdf, [1970-Jan-01 00:50:52.108818]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:51:16.001552]: Expected packet id: 0x58, Got packet id: 0x57, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x14,0xa2,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x2,0xda,0x0,0x57,0xa2,0x48,0x27,0x9, [1970-Jan-01 00:51:16.003405]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:51:16.049599]: Expected packet id: 0x64, Got packet id: 0x63, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x14,0xa5,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xd1,0x0,0x63,0x6f,0x9e,0x7f,0x9d, [1970-Jan-01 00:51:16.051704]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:51:25.151672]: Expected packet id: 0x8, Got packet id: 0x7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x19,0xdd,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x61,0x0,0x7,0xbc,0x52,0x74,0x6, [1970-Jan-01 00:51:25.153514]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:51:25.229897]: Expected packet id: 0x19, Got packet id: 0x18, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x19,0xec,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x1,0x0,0x18,0x9b,0xa9,0x7f,0x95, [1970-Jan-01 00:51:25.231931]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:51:25.236855]: Expected packet id: 0x19, Got packet id: 0x18, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x19,0xec,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x1,0x0,0x18,0x9b,0xa9,0x7f,0x95, [1970-Jan-01 00:51:25.238699]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:51:25.476774]: Expected packet id: 0x2b, Got packet id: 0x2a, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x1a,0x11,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x87,0x0,0x2a,0xcc,0x9b,0xed,0xb4, [1970-Jan-01 00:51:25.478615]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:51:33.441540]: Expected packet id: 0xa8, Got packet id: 0xa7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x1e,0x9c,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x8f,0x0,0xa7,0xc4,0x56,0x3b,0x2f, [1970-Jan-01 00:51:33.443408]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:51:39.986457]: Expected packet id: 0xe3, Got packet id: 0xe2, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0x22,0x56,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x6e,0x0,0xe2,0xe9,0xc0,0xdd,0x6e, [1970-Jan-01 00:51:39.988311]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:51:53.316779]: Expected packet id: 0x68, Got packet id: 0x67, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0x29,0xe5,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x8f,0x0,0x67,0x79,0xb2,0x72,0x1d, [1970-Jan-01 00:51:53.318649]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:52:44.344348]: Expected packet id: 0x8e, Got packet id: 0x8d, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x53,0x64,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x26,0x0,0x8d,0x3a,0x5,0x5e,0x2f, [1970-Jan-01 00:52:44.346183]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:52:46.491114]: Expected packet id: 0xfa, Got packet id: 0xf9, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x54,0xa1,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x12,0x0,0xf9,0x13,0xf2,0xd,0x9b, [1970-Jan-01 00:52:46.492963]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:52:52.566287]: Expected packet id: 0x2d, Got packet id: 0x2c, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x58,0x14,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x22,0x0,0x2c,0x3b,0xf7,0x8c,0x2a, [1970-Jan-01 00:52:52.568149]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:52:57.158969]: Expected packet id: 0x4, Got packet id: 0x3, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x5a,0xb9,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x2,0x7e,0x0,0x3,0x1e,0xf9,0xe6,0xdb, [1970-Jan-01 00:52:57.161084]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:05.906304]: Expected packet id: 0xa8, Got packet id: 0xa7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x5f,0xac,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x2,0x8c,0x0,0xa7,0xe4,0x33,0xaa,0xef, [1970-Jan-01 00:53:05.908151]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:07.994269]: Expected packet id: 0xb, Got packet id: 0xa, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x60,0xe9,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xdf,0x0,0xa,0xe6,0xf3,0x2d,0x91, [1970-Jan-01 00:53:07.996129]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:08.049563]: Expected packet id: 0x18, Got packet id: 0x17, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x60,0xe9,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xcd,0x0,0x17,0x9a,0x57,0x36,0x56, [1970-Jan-01 00:53:08.051654]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:14.692555]: Expected packet id: 0x4b, Got packet id: 0x4a, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x64,0xb3,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x3c,0x0,0x4a,0xcd,0x4a,0xcf,0x23, [1970-Jan-01 00:53:14.694383]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:18.929171]: Expected packet id: 0x2a, Got packet id: 0x29, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x67,0x17,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x2,0xd8,0x0,0x29,0xe7,0x47,0xa1,0x5a, [1970-Jan-01 00:53:18.931238]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:18.936078]: Expected packet id: 0x2a, Got packet id: 0x29, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x67,0x17,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x2,0xd8,0x0,0x29,0xe7,0x47,0xa1,0x5a, [1970-Jan-01 00:53:18.937932]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:53:23.538556]: Expected packet id: 0xfb, Got packet id: 0xfa, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x69,0xb9,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xab,0x0,0xfa,0x35,0x33,0xcf,0x3, [1970-Jan-01 00:53:23.541581]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:23.612873]: Expected packet id: 0xe, Got packet id: 0xd, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x69,0xbf,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x23,0x0,0xd,0xdc,0xac,0x8e,0xf2, [1970-Jan-01 00:53:23.614746]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:23.619630]: Expected packet id: 0xe, Got packet id: 0xd, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x69,0xbf,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x23,0x0,0xd,0xdc,0xac,0x8e,0xf2, [1970-Jan-01 00:53:23.621686]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:53:32.068622]: Expected packet id: 0xa8, Got packet id: 0xa7, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x6e,0x87,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x0,0xc3,0x0,0xa7,0x71,0xb,0x6f,0x83, [1970-Jan-01 00:53:32.070696]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:35.377806]: Expected packet id: 0x30, Got packet id: 0x2f, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x6f,0xc8,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xce,0x0,0x2f,0x3d,0xea,0xb6,0xfc, [1970-Jan-01 00:53:35.380194]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:39.469042]: Expected packet id: 0x85, Got packet id: 0x84, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x73,0x0,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x4e,0x0,0x84,0x70,0x93,0x68,0x2f, [1970-Jan-01 00:53:39.471127]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:53:45.829614]: TH0: 976 failures in last 65536 packets (1.48926%) [1970-Jan-01 00:54:19.199709]: Expected packet id: 0xc4, Got packet id: 0xc3, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x91,0x9f,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x3,0x2f,0x0,0xc3,0x87,0x7c,0x1,0xcc, [1970-Jan-01 00:54:19.201812]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:54:28.448224]: Expected packet id: 0x18, Got packet id: 0x17, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x93,0x7b,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x2a,0x0,0x17,0xc0,0x87,0x43,0x6, [1970-Jan-01 00:54:28.451164]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:54:34.685665]: Expected packet id: 0xf4, Got packet id: 0xf3, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0x94,0xda,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x84,0x0,0xf3,0x1d,0xfa,0x10,0x33, [1970-Jan-01 00:54:34.687511]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:55:01.380255]: Expected packet id: 0xe1, Got packet id: 0xe0, Full packet: 0xf3,0x0,0x0,0x32,0x0,0xd5,0x0,0xf,0x9a,0x3a,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x1,0x6d,0x0,0xe0,0xd7,0x11,0xc2,0x1b, [1970-Jan-01 00:55:01.382108]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:55:03.961210]: Expected packet id: 0x48, Got packet id: 0x47, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd5,0x0,0xf,0x9a,0xbd,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x0,0x3d,0x0,0x47,0x21,0xc0,0xa6,0xef, [1970-Jan-01 00:55:03.963053]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:55:39.983892]: Expected packet id: 0x80, Got packet id: 0x7f, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xa2,0x5b,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x2,0x8f,0x0,0x7f,0x39,0x8d,0x90,0x98, [1970-Jan-01 00:55:39.985714]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:55:46.022929]: Expected packet id: 0x55, Got packet id: 0x54, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xa3,0x91,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x78,0x0,0x54,0x40,0xd8,0xd0,0x4c, [1970-Jan-01 00:55:46.024796]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:56:09.204246]: Expected packet id: 0xab, Got packet id: 0xaa, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xa8,0x6c,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x16,0x0,0xaa,0x71,0xae,0x27,0xb1, [1970-Jan-01 00:56:09.206105]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:56:09.211130]: Expected packet id: 0xab, Got packet id: 0xaa, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xa8,0x6c,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x16,0x0,0xaa,0x71,0xae,0x27,0xb1, [1970-Jan-01 00:56:09.212976]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:56:21.453537]: Expected packet id: 0x7f, Got packet id: 0x7e, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xaa,0xfb,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0xf8,0x0,0x7e,0x5a,0xcf,0xd2,0x4b, [1970-Jan-01 00:56:21.455389]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:56:27.296145]: Expected packet id: 0x52, Got packet id: 0x51, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xac,0x2e,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x83,0x0,0x51,0x6f,0xf4,0x10,0xdb, [1970-Jan-01 00:56:27.297970]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:56:52.264754]: Expected packet id: 0xf7, Got packet id: 0xf6, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb1,0x72,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x3,0x23,0x0,0xf6,0x4,0x9f,0xbe,0xd3, [1970-Jan-01 00:56:52.266943]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:56:59.064430]: Expected packet id: 0xd2, Got packet id: 0xd1, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb2,0xe6,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0x33,0x0,0xd1,0xd8,0x28,0xc3,0x31, [1970-Jan-01 00:56:59.066287]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:57:08.112079]: Expected packet id: 0x2f, Got packet id: 0x2e, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xb4,0xda,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x2,0x13,0x0,0x2e,0x42,0x54,0x5,0x80, [1970-Jan-01 00:57:08.113919]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:57:55.140451]: Expected packet id: 0xbb, Got packet id: 0xba, Full packet: 0xf3,0x0,0x0,0x2b,0x0,0xd6,0x0,0xf,0xbd,0x19,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0xcc,0x0,0xba,0x91,0xa7,0x56,0xf7, [1970-Jan-01 00:57:55.142388]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:58:50.433739]: Expected packet id: 0xbf, Got packet id: 0xbe, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xc6,0xb9,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x2d,0x0,0xbe,0x37,0xdb,0xa7,0x6a, [1970-Jan-01 00:58:50.435590]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:58:50.441146]: Expected packet id: 0xbf, Got packet id: 0xbe, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xc6,0xb9,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0x2d,0x0,0xbe,0x37,0xdb,0xa7,0x6a, [1970-Jan-01 00:58:50.443011]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 2 [1970-Jan-01 00:59:24.830556]: Expected packet id: 0x96, Got packet id: 0x95, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xcc,0xc9,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0xa4,0x0,0x95,0xe2,0xe4,0x18,0x48, [1970-Jan-01 00:59:24.832388]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:59:27.946826]: Expected packet id: 0x6, Got packet id: 0x5, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xcd,0x4a,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x1,0xe1,0x0,0x5,0x38,0x9a,0xa1,0x98, [1970-Jan-01 00:59:27.948656]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 00:59:55.724467]: Expected packet id: 0xf7, Got packet id: 0xf6, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd6,0x0,0xf,0xd2,0x3f,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xaf,0x0,0xf6,0x9f,0xf8,0xd8,0xcd, [1970-Jan-01 00:59:55.726285]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 01:00:45.133888]: Expected packet id: 0x67, Got packet id: 0x66, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xdb,0x12,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x1,0x0,0x0,0x0,0x0,0xa,0x0,0x66,0xc2,0x24,0x35,0x9, [1970-Jan-01 01:00:45.135738]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 01:00:55.392162]: Expected packet id: 0x4a, Got packet id: 0x49, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xdc,0xba,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x0,0x57,0x0,0x49,0x95,0x4b,0xa0,0x7f, [1970-Jan-01 01:00:55.393994]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 01:02:24.122762]: Expected packet id: 0x72, Got packet id: 0x71, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0xe9,0x84,0x1,0x0,0xd7,0x0,0x1,0x43,0xc6,0x3,0x4a,0x1,0x0,0x0,0x0,0x0,0x0,0xb8,0x0,0x71,0x6f,0xfc,0xff,0xc5, [1970-Jan-01 01:02:24.124921]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-01 01:04:09.418797]: Expend Buffer: true [1970-Jan-01 01:04:09.618788]: Toolhead 0 commands idle [1970-Jan-01 01:04:15.119371]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 01:04:25.394599]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jan-01 01:04:33.293864]: Buffer stall ongoing: 6966 [1970-Jan-01 01:04:33.398847]: Buffer stall ongoing: 29283 [1970-Jan-01 01:04:33.497033]: Buffer stall ongoing: 50310 [1970-Jan-01 01:04:33.514776]: Last sync period had (0,50481,276633) buffer fulls due to suspend moves [1970-Jan-01 01:04:33.516603]: Syncing turned false [1970-Jan-01 01:04:33.604583]: PRU Event: PRU_SYNC_OFF(0) [1970-Jan-01 01:04:33.606333]: Buffer stall ongoing: 54567 [1970-Jan-01 01:04:35.262708]: Toolhead 0 ADC Error: 0 [1970-Jan-01 01:04:36.397702]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 01:04:40.801640]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 01:04:45.367468]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 01:04:47.025977]: Last sync period had (0,50481,277491) buffer fulls due to suspend moves [1970-Jan-01 01:04:47.027757]: Syncing turned false [1970-Jan-01 01:04:47.029475]: TH0: 194 failures in last 29714 packets (0.652891%) [1970-Jan-01 01:04:47.041494]: Toolhead Abort [1970-Jan-01 01:04:47.043187]: aborting pru with shutdown=true [1970-Jan-01 01:04:47.045873]: Last sync period had (0,50481,277491) buffer fulls due to suspend moves [1970-Jan-01 01:04:47.047646]: Libstepper All Axis Abort [1970-Jan-01 01:04:47.049261]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 01:04:47.061363]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 01:04:47.144120]: Heater manager Set Target Temperature to 0, index 0 [1970-Jan-01 01:04:47.146505]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 01:04:47.228876]: Commanding stats update: Retract count: 2195 [1970-Jan-01 01:04:47.240873]: Toolhead 0 marked as possibly blocking! [1970-Jan-01 01:04:47.355737]: Toolhead 0 done blocking! [1970-Jan-01 01:04:47.523405]: GetToolUsageStats called in machine state 0 [1970-Jan-01 01:04:47.525119]: Commanding tool usage stat retrieve [1970-Jan-01 01:04:47.526762]: GetToolUsageState: Proceeds to 1 [1970-Jan-01 01:04:47.528359]: GetToolUsagState: Error from retrieve: 0x10a [1970-Jan-01 01:04:47.542667]: Raw usage stats: retract 3611ct, extrusion 555064 steps, 2686 seconds, refurbed 0 times [1970-Jan-01 01:04:47.559775]: GetToolUsageStats called in machine state 1 [1970-Jan-01 01:04:47.561695]: VerifyToolUsageStatsRetrieved: Done [1970-Jan-01 01:04:47.563294]: GetToolUsageState: Proceeds to 2 [1970-Jan-01 01:04:47.613791]: GetToolUsageStats called in machine state 2 [1970-Jan-01 01:04:47.615504]: GetToolUsageState: Done, resets [1970-Jan-01 13:27:52.899944]: Heater manager Set Target Temperature to 215, index 0 [1970-Jan-01 13:27:52.910191]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jan-01 13:27:54.221201]: wait for heaters at target, wait bitmask 0x1 [1970-Jan-01 13:31:39.773516]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 13:31:42.689990]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jan-01 13:31:44.781776]: Raw HES proceeding [1970-Jan-01 13:31:44.804966]: Got raw val 23648, saturated: true [1970-Jan-01 13:31:44.819184]: Returning HES [1970-Jan-01 13:31:44.821103]: Sending back val 23648, saturated true [1970-Jan-01 13:31:44.911712]: Toolhead Abort [1970-Jan-01 13:31:44.913438]: aborting pru with shutdown=true [1970-Jan-01 13:31:44.920851]: Last sync period had (0,50481,3824658) buffer fulls due to suspend moves [1970-Jan-01 13:31:44.922595]: Libstepper All Axis Abort [1970-Jan-01 13:34:07.964231]: Toolhead 0 state error: 56 [1970-Jan-01 13:34:09.973127]: Toolhead 0 state error: 0 [1970-Jan-01 13:38:02.783189]: Toolhead 0 state error: 80 [1970-Jan-01 13:40:29.166157]: Toolhead 0 state error: 54 [1970-Jan-01 13:40:29.167850]: Tool UID becomes 0.