printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-16 01:25:28,413
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\User\\AppData\\Local\\Temp\\tmp-9916TtC53csJCufw\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-16 01:25:28,752
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-16 01:25:28,825
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-16 01:25:28,923
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-16 01:25:29,015
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-16 01:27:46,142
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-16 01:27:46,243
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-16 01:27:46,338
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-16 01:27:47,892
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-16 01:27:55,740
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-16 01:27:55,759
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-16 01:27:55,791
Beginning JT parse

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-16 12:02:47,926
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-16 12:02:51,111
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

machine_manager.py:1109: INFO
kaiten.machine_manager.MachineManager:_cancel_process
1970-01-16 20:37:10,851
Cancelling process {"reason": null, "thing_id": 0, "cancelled": false, "elapsed_time": 68964, "start_time": null, "step": "printing", "cancellable": true, "progress": 85, "can_print_again": true, "error": null, "username": "printerpanel", "id": 5, "name": "PrintProcess", "methods": ["load_filament", "suspend", "unload_filament"], "filepath": "/home/current_thing/\ud14c\uc2ac\ub77c.makerbot", "uuid": "792c0b61-50f7-483f-bcd2-9232544c04d4", "print_temperatures": {"0": 215}, "filament_extruded": 283, "time_remaining": 25013, "complete": false, "extrusion_mass_g": [331.7808837890625], "extrusion_distance_mm": [108740.984375], "filename": "/var/home/things/\ud14c\uc2ac\ub77c.makerbot", "time_estimation": 93978.1015625}

printprocess.py:942: INFO
kaiten.processes.printprocess.PrintProcess:cancel
1970-01-16 20:37:10,894
normal cancel

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-16 20:37:20,674
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-16 20:37:20,784
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-16 20:37:21,362
EEPROM transaction done after 0 seconds (8 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-16 20:37:21,388
EEPROM transaction yields ok

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-17 00:02:47,943
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-17 00:02:50,054
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-17 12:02:47,945
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-17 12:02:49,784
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-18 00:02:47,948
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-18 00:02:50,590
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-18 12:02:47,951
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-18 12:02:49,764
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-19 00:02:47,963
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-19 00:02:49,782
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-19 12:02:47,964
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-19 12:02:49,687
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-20 00:02:47,970
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-20 00:02:50,177
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-20 12:02:47,967
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-20 12:02:49,822
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-21 00:02:47,979
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-21 00:02:50,022
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-21 12:02:47,972
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-21 12:02:49,750
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-22 00:02:47,978
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-22 00:02:49,942
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-22 01:17:03,801
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 6, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "365ba71a-db76-4ff5-a050-d6b10e7d9bf5", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/var/home/things/\uae40\ub300\ud574 \ub85c\ubd07\ud3142.makerbot"}

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-22 01:17:47,378
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:17:47,505
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:17:47,665
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:17:47,968
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-22 01:17:48,055
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-22 01:17:48,103
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-22 01:17:49,207
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-22 01:17:56,538
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-22 01:17:57,947
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:18:12,746
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-22 01:18:41,499
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:18:41,563
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:18:41,661
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:18:41,814
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-22 01:18:42,059
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-22 01:18:42,209
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': 'a589078c-8ef1-4b97-adb1-bf0ebd276358', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 8339254, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [87.871879577636719], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [28799.955078125], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 36926.1015625, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-22 01:18:42,243
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-22 01:18:42,458
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\User\\AppData\\Local\\Temp\\tmp-10972eH54OIAr93vu\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:18:42,720
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:18:42,779
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:18:42,882
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:18:42,970
Sequence: wait_for_heaters_at_target((5, [True]), {})

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-22 01:19:31,268
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-22 01:19:31,281
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-22 01:19:34,011
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-22 01:19:34,054
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-22 01:19:34,479
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-22 01:19:34,524
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-22 01:20:02,957
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-22 01:20:02,979
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-22 01:20:06,763
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-22 01:20:06,809
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-22 01:20:07,949
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-22 01:20:07,996
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:21:01,844
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:21:01,955
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-22 01:21:02,048
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-22 01:21:03,565
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-22 01:21:11,236
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-22 01:21:11,249
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-22 01:21:11,270
Beginning JT parse

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-22 08:07:59,277
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-22 08:07:59,399
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-22 08:08:22,131
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-22 08:08:22,251
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-22 08:08:22,850
EEPROM transaction done after 0 seconds (8 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-22 08:08:22,872
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-22 08:08:23,583
In terminal hold step, errors ignored

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-22 12:02:48,064
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-22 12:02:52,013
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-23 00:02:48,172
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-23 00:02:52,605
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-23 12:02:48,243
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-23 12:02:51,774
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-23 22:02:25,503
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-23 22:02:25,536
Property Connected unhandled, no notification

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-23 22:02:27,548
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-23 22:02:27,581
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-23 22:02:31,191
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-23 22:02:31,252
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-23 22:02:31,794
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-23 22:02:31,854
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-23 22:02:32,374
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-23 22:02:32,435
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-23 22:03:08,320
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-23 22:03:08,385
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-24 00:02:48,335
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-24 00:02:52,447
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-24 01:15:35,552
Process method invoked: acknowledge_completed

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-24 01:15:57,673
{"methods": [], "reason": null, "uuid": "35db469e-b918-42f0-b62a-6aeb2a24a8d2", "cancelled": false, "temperature_settings": [215], "step": "running", "complete": false, "cancellable": true, "tool_index": 0, "error": null, "username": null, "id": 7, "name": "UnloadFilamentProcess"}

machine_manager.py:1070: INFO
kaiten.machine_manager.MachineManager:register_process
1970-01-24 01:15:57,706
Registering new process {'methods': [], 'reason': None, 'uuid': '35db469e-b918-42f0-b62a-6aeb2a24a8d2', 'cancelled': False, 'temperature_settings': [215], 'step': 'running', 'complete': False, 'cancellable': True, 'tool_index': 0, 'error': None, 'username': None, 'id': 7, 'name': 'UnloadFilamentProcess'}

loadfilamentprocess.py:161: INFO
kaiten.processes.unloadfilamentprocess.UnloadFilamentProcess:_do_cleanup
1970-01-24 01:19:15,192
Current tool seated raw HES is 21095, saturated=False

machine_manager.py:1040: INFO
kaiten.machine_manager.MachineManager:_iterate_process
1970-01-24 01:19:15,332
Process Finished: {'methods': [], 'reason': None, 'uuid': '35db469e-b918-42f0-b62a-6aeb2a24a8d2', 'cancelled': False, 'temperature_settings': [215], 'step': 'done', 'complete': True, 'cancellable': False, 'tool_index': 0, 'error': None, 'username': None, 'id': 7, 'name': 'UnloadFilamentProcess'}

machine_manager.py:1091: INFO
kaiten.machine_manager.MachineManager:_evict_process
1970-01-24 01:19:15,381
Evicting process {'methods': [], 'reason': None, 'uuid': '35db469e-b918-42f0-b62a-6aeb2a24a8d2', 'cancelled': False, 'temperature_settings': [215], 'step': 'done', 'complete': True, 'cancellable': False, 'tool_index': 0, 'error': None, 'username': None, 'id': 7, 'name': 'UnloadFilamentProcess'}

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-24 02:01:50,218
{"methods": [], "reason": null, "uuid": "a809c707-6684-46ad-a111-5a2ac8d6f3fa", "cancelled": false, "temperature_settings": [215], "step": "running", "complete": false, "cancellable": true, "tool_index": 0, "error": null, "username": null, "id": 8, "name": "LoadFilamentProcess"}

machine_manager.py:1070: INFO
kaiten.machine_manager.MachineManager:register_process
1970-01-24 02:01:50,240
Registering new process {'methods': [], 'reason': None, 'uuid': 'a809c707-6684-46ad-a111-5a2ac8d6f3fa', 'cancelled': False, 'temperature_settings': [215], 'step': 'running', 'complete': False, 'cancellable': True, 'tool_index': 0, 'error': None, 'username': None, 'id': 8, 'name': 'LoadFilamentProcess'}

loadfilamentprocess.py:161: INFO
kaiten.processes.loadfilamentprocess.LoadFilamentProcess:_do_cleanup
1970-01-24 02:05:43,687
Current tool seated raw HES is 20913, saturated=False

machine_manager.py:1040: INFO
kaiten.machine_manager.MachineManager:_iterate_process
1970-01-24 02:05:43,859
Process Finished: {'methods': [], 'reason': None, 'uuid': 'a809c707-6684-46ad-a111-5a2ac8d6f3fa', 'cancelled': False, 'temperature_settings': [215], 'step': 'done', 'complete': True, 'cancellable': False, 'tool_index': 0, 'error': None, 'username': None, 'id': 8, 'name': 'LoadFilamentProcess'}

machine_manager.py:1091: INFO
kaiten.machine_manager.MachineManager:_evict_process
1970-01-24 02:05:43,937
Evicting process {'methods': [], 'reason': None, 'uuid': 'a809c707-6684-46ad-a111-5a2ac8d6f3fa', 'cancelled': False, 'temperature_settings': [215], 'step': 'done', 'complete': True, 'cancellable': False, 'tool_index': 0, 'error': None, 'username': None, 'id': 8, 'name': 'LoadFilamentProcess'}

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-24 02:06:13,858
{"methods": [], "params": {}, "reason": null, "uuid": "d6afdb85-3eaa-4ba6-a4b2-ea61c1231dc9", "cancelled": false, "ignore_tool_errors": true, "error": null, "step": "running", "complete": false, "cancellable": true, "machine_func": "cool", "username": null, "id": 9, "name": "MachineActionProcess"}

machine_manager.py:1070: INFO
kaiten.machine_manager.MachineManager:register_process
1970-01-24 02:06:13,914
Registering new process {'methods': [], 'params': {}, 'reason': None, 'uuid': 'd6afdb85-3eaa-4ba6-a4b2-ea61c1231dc9', 'cancelled': False, 'ignore_tool_errors': True, 'error': None, 'step': 'running', 'complete': False, 'cancellable': True, 'machine_func': 'cool', 'username': None, 'id': 9, 'name': 'MachineActionProcess'}

machine_manager.py:1040: INFO
kaiten.machine_manager.MachineManager:_iterate_process
1970-01-24 02:06:14,238
Process Finished: {'methods': [], 'params': {}, 'reason': None, 'uuid': 'd6afdb85-3eaa-4ba6-a4b2-ea61c1231dc9', 'cancelled': False, 'ignore_tool_errors': True, 'error': None, 'step': 'done', 'complete': True, 'cancellable': False, 'machine_func': 'cool', 'username': None, 'id': 9, 'name': 'MachineActionProcess'}

machine_manager.py:1091: INFO
kaiten.machine_manager.MachineManager:_evict_process
1970-01-24 02:06:14,256
Evicting process {'methods': [], 'params': {}, 'reason': None, 'uuid': 'd6afdb85-3eaa-4ba6-a4b2-ea61c1231dc9', 'cancelled': False, 'ignore_tool_errors': True, 'error': None, 'step': 'done', 'complete': True, 'cancellable': False, 'machine_func': 'cool', 'username': None, 'id': 9, 'name': 'MachineActionProcess'}

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-24 02:07:19,617
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 10, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "cccb8937-7f2a-4432-b147-462ac8c20770", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/var/home/things/d\uc870 \ubcf8\uccb4 4.makerbot"}

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-24 02:07:44,191
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:07:44,293
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:07:44,527
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:07:44,662
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-24 02:07:44,728
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-24 02:07:44,797
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-24 02:07:46,468
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-24 02:07:53,648
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-24 02:07:55,075
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:08:09,920
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-24 02:08:38,607
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:08:38,670
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:08:38,726
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:08:38,809
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-24 02:08:39,106
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-24 02:08:39,221
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': 'c8d22dbd-86f4-49e3-9ea4-1e22eb05bb4b', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 5588422, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [279.51205444335938], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [91609.90625], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 61287.80078125, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-24 02:08:39,243
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-24 02:08:39,404
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\User\\AppData\\Local\\Temp\\tmp-8624dSAS82GAWdhD\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:08:39,607
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:08:39,654
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:08:39,748
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:08:39,814
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:09:40,382
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:09:40,457
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-24 02:09:40,527
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-24 02:09:41,967
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-24 02:09:49,994
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-24 02:09:50,008
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-24 02:09:50,021
Beginning JT parse

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-24 12:02:48,329
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-24 12:02:50,438
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-24 15:56:29,496
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-24 15:56:29,557
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-24 15:56:58,274
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-24 15:56:58,321
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-24 15:56:58,884
EEPROM transaction done after 0 seconds (13 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-24 15:56:58,896
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-24 15:56:59,301
In terminal hold step, errors ignored

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-25 00:02:48,410
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-25 00:02:50,491
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-25 12:02:48,452
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-25 12:02:51,683
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-26 00:02:48,519
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-26 00:02:51,520
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-26 12:02:48,543
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-26 12:02:50,760
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-26 23:21:55,491
Process method invoked: acknowledge_completed

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-27 00:02:48,547
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-27 00:02:50,617
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-27 12:02:48,561
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-27 12:02:51,793
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-28 00:02:48,553
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-28 00:02:50,541
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-28 12:02:48,555
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-28 12:02:50,407
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-29 00:02:48,560
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-29 00:02:50,607
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-29 12:02:48,566
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-29 12:02:50,399
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-30 00:02:48,569
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-30 00:02:50,846
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-30 01:56:45,865
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 11, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "88551151-2f83-4640-8cbd-2bcbcb62ee71", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/var/home/things/2000\uc6d0.makerbot"}

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-30 01:57:00,976
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:01,046
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:01,222
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:01,365
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-30 01:57:01,463
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-30 01:57:01,504
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-30 01:57:02,462
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-30 01:57:09,690
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-30 01:57:11,062
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:25,817
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-30 01:57:54,676
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:54,760
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:54,825
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:54,917
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-30 01:57:55,123
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-30 01:57:55,250
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': '19ba912b-7ba8-422d-8a94-537998d5aeac', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 3625296, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [16.672348022460938], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [5464.35205078125], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 6862.93017578125, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-30 01:57:55,284
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-30 01:57:55,452
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\User\\AppData\\Local\\Temp\\tmp-12752PozGwVAhnG1m\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:55,641
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:55,704
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:55,783
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 01:57:55,849
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 02:00:19,501
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 02:00:19,596
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-30 02:00:19,711
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-30 02:00:21,173
Beginning print sequence

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-30 02:00:29,664
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-30 02:00:29,679
Property Connected unhandled, no notification

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-30 02:00:29,775
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-30 02:00:29,789
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-30 02:00:29,812
Beginning JT parse

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-30 02:00:33,060
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-30 02:00:33,096
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-30 02:00:33,338
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-30 02:00:33,373
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-30 02:00:40,811
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-30 02:00:40,824
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-30 02:00:42,327
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-30 02:00:42,362
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-30 02:00:45,083
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-30 02:00:45,118
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-30 03:12:35,300
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-30 03:12:35,367
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-30 03:12:58,654
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-30 03:12:58,764
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-30 03:12:59,389
EEPROM transaction done after 0 seconds (8 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-30 03:12:59,418
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-30 03:13:00,173
In terminal hold step, errors ignored

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-30 12:02:48,677
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-30 12:02:52,122
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-31 00:02:44,264
Process method invoked: acknowledge_completed

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-31 00:02:48,681
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-31 00:02:50,619
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-31 00:05:56,223
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 12, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "4630df04-4e74-4ed9-819c-185a58b54ff6", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud55c\ucef4\uc624\ud53c\uc2a4 2018 - \ubcf5\uc0ac\ubcf8/\uc720\uc6b0\uc194 \uc0ac\uacfc\ub7a8\ud504.makerbot"}

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-31 00:06:05,251
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:05,311
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:05,493
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:05,605
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-31 00:06:05,671
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-31 00:06:05,712
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-31 00:06:06,688
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-31 00:06:13,918
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-31 00:06:15,301
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:30,092
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-31 00:06:58,399
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:58,466
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:58,572
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:58,664
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-31 00:06:58,862
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-31 00:06:58,983
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': '56c85989-72bd-4940-882a-cd82afe8cd81', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 2070924, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [20.24445915222168], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [6635.109375], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 6147.490234375, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-31 00:06:59,017
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-31 00:06:59,180
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\User\\AppData\\Local\\Temp\\tmp-11800YAoHFk5IDf2V\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:59,354
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:59,424
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:59,505
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:06:59,569
Sequence: wait_for_heaters_at_target((5, [True]), {})

machine_manager.py:1109: INFO
kaiten.machine_manager.MachineManager:_cancel_process
1970-01-31 00:08:55,311
Cancelling process {"reason": null, "thing_id": 0, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "final_heating", "cancellable": true, "progress": 93, "can_print_again": true, "error": null, "username": "printerpanel", "id": 12, "name": "PrintProcess", "methods": [], "filepath": "/home/current_thing/\uc720\uc6b0\uc194 \uc0ac\uacfc\ub7a8\ud504.makerbot", "uuid": "4630df04-4e74-4ed9-819c-185a58b54ff6", "print_temperatures": {"0": 215}, "filament_extruded": 0, "time_remaining": 6147, "complete": false, "extrusion_mass_g": [20.24445915222168], "extrusion_distance_mm": [6635.109375], "filename": "/home/usb_storage/\ud55c\ucef4\uc624\ud53c\uc2a4 2018 - \ubcf5\uc0ac\ubcf8/\uc720\uc6b0\uc194 \uc0ac\uacfc\ub7a8\ud504.makerbot", "time_estimation": 6147.490234375}

printprocess.py:942: INFO
kaiten.processes.printprocess.PrintProcess:cancel
1970-01-31 00:08:55,356
normal cancel

printprocess.py:1130: INFO
kaiten.processes.printprocess.PrintProcess:_do_cancel
1970-01-31 00:08:56,963
Start sequence never finished, not mopving

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-31 00:09:12,277
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-31 00:09:12,344
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-31 00:09:12,916
EEPROM transaction done after 0 seconds (11 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-31 00:09:12,928
EEPROM transaction yields ok

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-31 00:12:11,272
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 13, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "1c18a15b-301a-44e7-a1ba-d884d92909e5", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud55c\ucef4\uc624\ud53c\uc2a4 2018 - \ubcf5\uc0ac\ubcf8/\uc720\uc6b0\uc194 \uc0ac\uacfc \ub7a8\ud504 \ub05d.makerbot"}

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-31 00:12:18,598
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:12:18,638
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:12:18,864
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:12:19,017
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-31 00:12:19,130
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-31 00:12:19,161
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-31 00:12:20,087
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-31 00:12:27,339
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-31 00:12:28,781
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:12:43,589
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-31 00:13:11,670
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:13:11,719
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:13:11,799
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:13:11,885
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-31 00:13:12,088
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-31 00:13:12,216
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': '4d9d15ba-e887-4a8d-85aa-3beb2e71351d', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 1374557, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [4.4130959510803223], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [1446.3895263671875], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 3876.679931640625, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-31 00:13:12,243
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-31 00:13:12,412
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\User\\AppData\\Local\\Temp\\tmp-11800MaQYgZ6L2W63\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:13:12,625
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:13:12,675
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:13:12,775
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:13:12,858
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:14:40,566
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:14:40,632
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-31 00:14:40,716
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-31 00:14:42,140
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-31 00:14:49,872
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-31 00:14:49,894
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-31 00:14:49,912
Beginning JT parse

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-31 00:57:28,899
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-31 00:57:28,964
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-31 00:58:05,529
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-31 00:58:05,588
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-31 00:58:06,156
EEPROM transaction done after 0 seconds (12 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-31 00:58:06,168
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-31 00:58:06,651
In terminal hold step, errors ignored

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-31 12:02:48,716
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-31 12:02:52,836
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-01 00:02:48,740
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-01 00:02:52,532
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-01 12:02:48,821
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-01 12:02:53,171
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-02 00:02:49,409
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-02 00:02:52,517
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-02 12:02:49,439
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-02 12:02:53,516
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-03 00:02:49,492
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-03 00:02:54,753
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-03 12:02:49,555
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-03 12:02:52,292
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-04 00:02:49,594
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-04 00:02:54,475
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-04 12:02:49,637
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-04 12:02:54,176
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-05 00:02:49,700
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-05 00:02:52,991
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-05 12:02:49,747
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-05 12:02:54,078
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-06 00:02:49,808
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-06 00:02:52,932
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-06 12:02:49,849
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-06 12:02:54,179
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-07 00:02:49,909
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-07 00:02:54,726
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-07 12:02:49,927
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-07 12:02:52,421
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-08 00:02:49,965
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-08 00:02:54,129
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-08 12:02:50,017
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-08 12:02:52,706
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-09 00:02:50,063
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-09 00:02:54,185
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-09 12:02:50,091
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-09 12:02:54,341
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-10 00:02:50,126
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-10 00:02:53,144
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-10 12:02:50,164
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-10 12:02:54,404
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-11 00:02:50,198
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-11 00:02:57,709
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-11 12:02:50,223
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-11 12:02:54,424
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-12 00:02:50,256
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-12 00:02:54,593
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-02-12 00:49:08,134
Process method invoked: acknowledge_completed

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-02-12 00:49:12,303
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 14, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "be28afbd-fa79-401e-8bee-5508f811a31e", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/current_thing/\uc720\uc6b0\uc194 \uc0ac\uacfc \ub7a8\ud504 \ub05d.makerbot"}

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-02-12 00:49:12,824
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:49:12,875
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:49:12,998
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:49:13,138
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-02-12 00:49:13,296
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-02-12 00:49:13,361
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-02-12 00:49:14,335
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-02-12 00:49:21,510
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-02-12 00:49:22,902
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:49:37,624
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-02-12 00:50:06,457
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:50:06,514
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:50:06,614
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:50:06,724
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-12 00:50:06,895
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-12 00:50:07,033
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': '4d9d15ba-e887-4a8d-85aa-3beb2e71351d', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 1374557, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [4.4130959510803223], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [1446.3895263671875], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 3876.679931640625, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-12 00:50:07,058
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-12 00:50:07,227
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\User\\AppData\\Local\\Temp\\tmp-11800MaQYgZ6L2W63\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:50:07,394
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:50:07,450
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:50:07,536
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:50:07,634
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:52:29,483
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:52:29,588
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-12 00:52:29,666
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-02-12 00:52:31,113
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-12 00:52:38,748
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-12 00:52:38,772
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-12 00:52:38,785
Beginning JT parse

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-12 01:35:17,839
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-12 01:35:17,896
Exhausting move buffer, disabling stall error

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-02-12 01:35:51,929
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-02-12 01:35:51,968
Property Connected unhandled, no notification

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-02-12 01:35:54,895
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-12 01:35:55,048
EEPROM transaction begins after 0 seconds (0 iterations)

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-02-12 01:35:55,513
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-02-12 01:35:55,536
Property Connected unhandled, no notification

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-12 01:35:55,700
EEPROM transaction done after 0 seconds (8 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-12 01:35:55,722
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-02-12 01:35:56,399
In terminal hold step, errors ignored

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-02-12 01:36:00,232
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-02-12 01:36:00,294
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-02-12 01:36:02,364
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-02-12 01:36:02,426
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-02-12 01:36:03,131
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-02-12 01:36:03,191
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-12 12:02:50,335
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-12 12:02:58,738
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-13 00:02:50,482
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-13 00:02:58,314
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-13 12:02:50,666
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-13 12:02:55,753
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-14 00:02:50,737
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-14 00:02:57,493
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-14 12:02:50,904
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-14 12:02:57,680
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-15 00:02:50,966
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-15 00:02:55,498
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-15 12:02:51,038
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-15 12:02:58,227
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-16 00:02:51,112
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-16 00:02:55,125
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-16 12:02:51,186
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-16 12:02:58,292
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-17 00:02:51,318
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-17 00:02:56,410
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-17 12:02:51,470
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-17 12:02:58,540
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-18 00:02:51,584
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-18 00:02:56,418
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-18 12:02:51,702
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-18 12:02:58,669
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-19 00:02:51,817
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-19 00:02:56,680
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-02-19 01:58:00,965
Process method invoked: acknowledge_completed

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-02-19 01:58:50,397
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 15, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "5019f8e8-7217-4317-a7ba-bda70ab28d01", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud55c\ucef4\uc624\ud53c\uc2a4 2018 - \ubcf5\uc0ac\ubcf8/222.makerbot"}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-02-19 01:59:04,962
Beginning print of /home/current_thing/222.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-02-19 01:59:05,063
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 01:59:05,107
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 01:59:05,309
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 01:59:05,409
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-02-19 01:59:05,487
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-02-19 01:59:05,521
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-02-19 01:59:06,497
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-02-19 01:59:13,744
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-02-19 01:59:15,124
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 01:59:29,931
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-02-19 01:59:58,974
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 01:59:59,032
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 01:59:59,120
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 01:59:59,231
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-19 01:59:59,453
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-19 01:59:59,581
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': 'd8e6d604-ebde-4c21-b4ee-940de474bce4', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 2296837, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [8.0690984725952148], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [2644.64208984375], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 3316.530029296875, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-19 01:59:59,617
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-19 01:59:59,798
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 18.5, 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportSolidExpansionOutset': 0.0, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/raftInterfaceLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110.0, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/raftSurfaceInsetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/density': 1.0, 'gaggles/default/areaToTaperSupportsIn': 9223372036854775807, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/purgeWallXLength': 30, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1.0, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/extruderProfiles/0/defaultTemperature': 215, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/purgeWallSpacing': 1.0, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0.0, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0.0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/modelFillProfiles/roof_surface/density': 1.0, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftBaseShells': 3, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftSurfaceShells': 2, 'gaggles/default/maxConnectionLength': 10.0, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftSurfaceThickness': 0.27000000000000002, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minThickInfillImprovement': 1.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1.0, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/purgeWallPatternWidth': 2.0, 'gaggles/default/supportFillProfiles/base_layer_surface/density': 1.0, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 19.0, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0.0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360.0, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10.0, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/raftBaseLayers': 1, 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/raftSurfaceShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/raftBaseOutset': 4, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/supportFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0.0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 90, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1.0, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/base/minPathLength': 0.0, 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0.0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/bridgeMaximumLength': 80.0, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83.0, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0.0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10.0, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10.0, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110.0, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1.0, '_extruders/0': 'mk13', 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1.0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40.0, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/raftBaseThickness': 0.29999999999999999, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 6.0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'doRaft': True, 'gaggles/default/raftSurfaceZOffset': -0.029999999999999999, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/purgeBucketSide': 4.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1.0, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/raftInterfaceWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0.0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0.0, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/raftBaseWidth': 2.5, 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/raftSurfaceLayers': 2, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 6.0, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/backlashX': 0.0, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/exponentialDecelerationMinSpeed': 0.0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2.0, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': False, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/raftBaseInsetDistanceMultiplier': 0.40000000000000002, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1.0, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/yScale': 1.0, 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68.0, 'gaggles/default/doSupport': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10.0, 'gaggles/default/horizontalInset': 0, 'gaggles/default/purgeWallBasePatternWidth': 8.0, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/purgeWallBasePatternLength': 10.0, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', '_materials/0': 'pla', 'gaggles/default/raftInterfaceThickness': 0.27000000000000002, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1.0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/raftInterfaceZOffset': -0.14000000000000001, 'gaggles/default/modelFillProfiles/solid/density': 1.0, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1.0, 'gaggles/default/areaToTaperSupportsOut': 0.0, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0.0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1.0, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0.0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/doFanModulation': True, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/fanDefaultSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '5.23.2', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/doNewPurgeWalls': False, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.0, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1.0, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45.0, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1.0, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftSurfaceOutset': 4, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/purgeWallModelOffset': 2.0, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 02:00:00,024
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 02:00:00,083
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 02:00:00,190
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 02:00:00,272
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 02:02:17,114
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 02:02:17,243
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-19 02:02:17,315
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-02-19 02:02:18,823
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-19 02:02:26,396
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-19 02:02:26,411
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-19 02:02:26,422
Beginning JT parse

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-19 03:06:10,661
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-19 03:06:10,742
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-02-19 03:06:41,410
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-19 03:06:41,527
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-19 03:06:42,172
EEPROM transaction done after 0 seconds (8 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-19 03:06:42,197
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-02-19 03:06:42,822
In terminal hold step, errors ignored

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-19 12:02:51,888
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-19 12:02:58,581
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-20 00:02:52,063
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-20 00:02:57,089
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-02-20 01:35:51,323
Process method invoked: acknowledge_completed

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-02-20 01:36:24,126
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 16, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "680bbbbf-cf8a-4cdd-ad81-ea14a56d542b", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud55c\ucef4\uc624\ud53c\uc2a4 2018 - \ubcf5\uc0ac\ubcf8/3333444.makerbot"}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-02-20 01:36:39,788
Beginning print of /home/current_thing/3333444.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-02-20 01:36:39,867
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:36:39,915
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:36:40,084
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:36:40,204
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-02-20 01:36:40,297
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-02-20 01:36:40,336
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-02-20 01:36:41,275
using input kwargs

machine_manager.py:1109: INFO
kaiten.machine_manager.MachineManager:_cancel_process
1970-02-20 01:36:48,023
Cancelling process {"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initial_heating", "cancellable": true, "progress": 0, "can_print_again": true, "error": null, "username": "printerpanel", "id": 16, "name": "PrintProcess", "methods": [], "filepath": "/home/current_thing/3333444.makerbot", "uuid": "680bbbbf-cf8a-4cdd-ad81-ea14a56d542b", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud55c\ucef4\uc624\ud53c\uc2a4 2018 - \ubcf5\uc0ac\ubcf8/3333444.makerbot"}

printprocess.py:942: INFO
kaiten.processes.printprocess.PrintProcess:cancel
1970-02-20 01:36:48,050
normal cancel

printprocess.py:1130: INFO
kaiten.processes.printprocess.PrintProcess:_do_cancel
1970-02-20 01:36:49,793
Start sequence never finished, not mopving

xyhomeactivity.py:26: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_cleanup
1970-02-20 01:36:49,894
HOME: XY home cleaning up failed home for axis y

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-02-20 01:36:50,224
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-20 01:36:50,298
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-20 01:36:50,917
EEPROM transaction done after 0 seconds (12 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-20 01:36:50,937
EEPROM transaction yields ok

machine_manager.py:1486: INFO
kaiten.machine_manager.MachineManager:print_again
1970-02-20 01:38:09,806
Printing 3333444.makerbot again.

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-02-20 01:38:10,012
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 17, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "c97459ac-3e1c-43c5-bdec-d6b3671c3b97", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/current_thing/3333444.makerbot"}

machine_manager.py:1070: INFO
kaiten.machine_manager.MachineManager:register_process
1970-02-20 01:38:10,049
Registering new process {'reason': None, 'thing_id': None, 'cancelled': False, 'elapsed_time': 0, 'start_time': None, 'step': 'initializing', 'cancellable': True, 'progress': 0, 'can_print_again': False, 'error': None, 'username': 'printerpanel', 'id': 17, 'name': 'PrintProcess', 'methods': [], 'filepath': None, 'uuid': 'c97459ac-3e1c-43c5-bdec-d6b3671c3b97', 'print_temperatures': {}, 'filament_extruded': 0, 'complete': False, 'filename': '/home/current_thing/3333444.makerbot'}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-02-20 01:38:10,232
Beginning print of /home/current_thing/3333444.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-02-20 01:38:10,356
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:10,404
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:10,578
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:10,719
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-02-20 01:38:10,851
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-02-20 01:38:10,916
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-02-20 01:38:11,954
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-02-20 01:38:13,327
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-02-20 01:38:14,737
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:29,646
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-02-20 01:38:58,379
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:58,430
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:58,532
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:58,684
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-20 01:38:58,907
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-20 01:38:59,069
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': 'd3f9b9ef-1e85-467b-9011-4314f857f2c4', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 3141603, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [34.5771484375], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [11332.6396484375], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 6656.18017578125, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-20 01:38:59,094
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-02-20 01:38:59,312
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 18.5, 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportSolidExpansionOutset': 0.0, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/raftInterfaceLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110.0, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/raftSurfaceInsetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/density': 1.0, 'gaggles/default/areaToTaperSupportsIn': 9223372036854775807, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/purgeWallXLength': 30, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1.0, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/extruderProfiles/0/defaultTemperature': 215, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/purgeWallSpacing': 1.0, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0.0, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0.0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/modelFillProfiles/roof_surface/density': 1.0, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftBaseShells': 3, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftSurfaceShells': 2, 'gaggles/default/maxConnectionLength': 10.0, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftSurfaceThickness': 0.27000000000000002, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minThickInfillImprovement': 1.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1.0, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/purgeWallPatternWidth': 2.0, 'gaggles/default/supportFillProfiles/base_layer_surface/density': 1.0, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 19.0, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0.0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360.0, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10.0, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/raftBaseLayers': 1, 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/raftSurfaceShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/raftBaseOutset': 4, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/supportFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0.0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 90, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1.0, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/base/minPathLength': 0.0, 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0.0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/bridgeMaximumLength': 80.0, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83.0, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0.0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10.0, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10.0, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110.0, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1.0, '_extruders/0': 'mk13', 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1.0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40.0, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/raftBaseThickness': 0.29999999999999999, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 6.0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'doRaft': True, 'gaggles/default/raftSurfaceZOffset': -0.029999999999999999, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/purgeBucketSide': 4.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1.0, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/raftInterfaceWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0.0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0.0, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/raftBaseWidth': 2.5, 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/raftSurfaceLayers': 2, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 6.0, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/backlashX': 0.0, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/exponentialDecelerationMinSpeed': 0.0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2.0, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': False, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/raftBaseInsetDistanceMultiplier': 0.40000000000000002, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1.0, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/yScale': 1.0, 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68.0, 'gaggles/default/doSupport': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10.0, 'gaggles/default/horizontalInset': 0, 'gaggles/default/purgeWallBasePatternWidth': 8.0, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90.0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/purgeWallBasePatternLength': 10.0, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', '_materials/0': 'pla', 'gaggles/default/raftInterfaceThickness': 0.27000000000000002, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1.0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/raftInterfaceZOffset': -0.14000000000000001, 'gaggles/default/modelFillProfiles/solid/density': 1.0, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1.0, 'gaggles/default/areaToTaperSupportsOut': 0.0, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0.0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1.0, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0.0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/doFanModulation': True, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/fanDefaultSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '5.23.2', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/doNewPurgeWalls': False, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.0, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1.0, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45.0, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1.0, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftSurfaceOutset': 4, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/purgeWallModelOffset': 2.0, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:59,518
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:59,611
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:59,704
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:38:59,774
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:41:21,642
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:41:21,855
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-02-20 01:41:22,047
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-02-20 01:41:23,575
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-20 01:41:31,305
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-20 01:41:31,321
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-20 01:41:31,334
Beginning JT parse

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-20 03:46:47,111
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-02-20 03:46:47,193
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-02-20 03:47:12,401
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-20 03:47:12,515
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-20 03:47:13,096
EEPROM transaction done after 0 seconds (7 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-02-20 03:47:13,133
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-02-20 03:47:13,820
In terminal hold step, errors ignored

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-20 12:02:52,104
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-20 12:02:58,967
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-21 00:02:52,181
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-21 00:02:57,060
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-21 12:02:52,235
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-21 12:02:59,017
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-22 00:02:52,329
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-22 00:02:59,299
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-22 12:02:52,385
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-22 12:02:56,629
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-23 00:02:52,477
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-23 00:02:59,668
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-23 12:02:52,581
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-23 12:02:59,691
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-24 00:02:52,666
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-24 00:02:59,985
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-24 12:02:52,761
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-24 12:02:59,792
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-25 00:02:52,849
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-25 00:03:00,703
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-25 12:02:52,928
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-25 12:02:59,814
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-26 00:02:52,995
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-26 00:03:01,242
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-02-26 02:43:50,268
Process method invoked: acknowledge_completed

machine_manager.py:1040: INFO
kaiten.machine_manager.MachineManager:_iterate_process
1970-02-26 02:43:50,363
Process Finished: {'reason': None, 'thing_id': 0, 'cancelled': False, 'elapsed_time': 7535, 'start_time': None, 'step': 'done', 'cancellable': True, 'progress': 100, 'can_print_again': True, 'error': None, 'username': 'printerpanel', 'id': 17, 'name': 'PrintProcess', 'methods': [], 'filepath': '/home/current_thing/3333444.makerbot', 'uuid': 'c97459ac-3e1c-43c5-bdec-d6b3671c3b97', 'print_temperatures': {0: 215}, 'filament_extruded': 34, 'time_remaining': 0, 'complete': True, 'extrusion_mass_g': [34.5771484375], 'extrusion_distance_mm': [11332.6396484375], 'filename': '/home/current_thing/3333444.makerbot', 'time_estimation': 6656.18017578125}

machine_manager.py:1091: INFO
kaiten.machine_manager.MachineManager:_evict_process
1970-02-26 02:43:50,405
Evicting process {'reason': None, 'thing_id': 0, 'cancelled': False, 'elapsed_time': 7535, 'start_time': None, 'step': 'done', 'cancellable': True, 'progress': 100, 'can_print_again': True, 'error': None, 'username': 'printerpanel', 'id': 17, 'name': 'PrintProcess', 'methods': [], 'filepath': '/home/current_thing/3333444.makerbot', 'uuid': 'c97459ac-3e1c-43c5-bdec-d6b3671c3b97', 'print_temperatures': {0: 215}, 'filament_extruded': 34, 'time_remaining': 0, 'complete': True, 'extrusion_mass_g': [34.5771484375], 'extrusion_distance_mm': [11332.6396484375], 'filename': '/home/current_thing/3333444.makerbot', 'time_estimation': 6656.18017578125}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-26 12:02:52,999
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-26 12:02:55,019
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-27 00:02:53,005
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-27 00:02:55,278
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-27 12:02:53,018
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-27 12:02:54,833
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-28 00:02:53,026
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-28 00:02:55,263
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-28 12:02:53,030
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-28 12:02:55,861
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-01 00:02:53,034
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-01 00:02:55,078
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-01 12:02:53,035
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-01 12:02:54,840
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-02 00:02:53,053
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-02 00:02:55,055
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-02 12:02:53,062
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-02 12:02:55,205
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-03 00:02:53,058
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-03 00:02:55,029
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-03 12:02:53,063
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-03 12:02:55,181
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-04 00:02:53,064
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-04 00:02:55,022
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-04 12:02:53,067
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-04 12:02:55,124
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-05 00:02:53,071
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-05 00:02:55,102
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-05 12:02:53,081
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-05 12:02:55,201
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-06 00:02:53,088
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-06 00:02:55,078
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-06 12:02:53,083
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-06 12:02:55,108
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-07 00:02:53,085
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-07 00:02:55,613
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-07 12:02:53,088
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-07 12:02:55,191
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-08 00:02:53,095
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-08 00:02:55,756
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-08 12:02:53,099
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-08 12:02:55,186
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-09 00:02:53,102
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-09 00:02:55,383
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-09 12:02:53,107
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-09 12:02:55,408
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-10 00:02:53,113
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-10 00:02:55,399
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-10 00:54:14,009
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-10 00:54:14,031
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-03-10 00:54:16,213
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-03-10 00:54:16,301
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-10 00:54:17,287
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-10 00:54:17,299
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-03-10 00:54:18,304
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-03-10 00:54:18,335
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-03-10 00:54:26,753
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-03-10 00:54:26,782
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-10 12:02:53,113
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-10 12:02:55,403
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-11 00:02:53,114
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-11 00:02:57,335
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-11 12:02:53,116
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-11 12:02:55,260
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-11 20:16:36,254
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-11 20:16:36,268
Property Connected unhandled, no notification

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-11 20:16:37,215
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-11 20:16:37,238
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-03-11 20:16:38,620
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-03-11 20:16:38,649
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-03-11 20:16:38,767
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-03-11 20:16:38,796
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-03-11 20:16:38,927
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-03-11 20:16:38,955
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-12 00:02:53,118
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-12 00:02:55,349
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-12 12:02:53,125
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-12 12:02:55,341
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-13 00:02:53,126
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-13 00:02:57,156
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-13 12:02:53,138
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-13 12:02:55,407
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-14 00:02:53,134
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-14 00:02:56,231
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-14 12:02:53,137
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-14 12:02:56,493
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-15 00:02:53,141
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-15 00:02:55,296
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-15 12:02:53,147
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-15 12:03:00,270
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-16 00:02:53,153
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-16 00:02:55,435
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-16 12:02:53,162
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-16 12:02:55,459
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-17 00:02:53,169
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-17 00:02:55,525
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-17 12:02:53,189
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-17 12:02:55,456
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-18 00:02:53,179
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-18 00:02:55,544
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-18 04:33:25,149
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-18 04:33:25,166
Property Connected unhandled, no notification

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-18 04:33:25,869
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-03-18 04:33:25,895
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-03-18 04:33:26,954
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-03-18 04:33:26,990
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-03-18 04:33:27,146
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-03-18 04:33:27,171
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-03-18 04:33:30,090
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-03-18 04:33:30,117
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-18 12:02:53,183
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-18 12:02:55,282
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-19 00:02:53,194
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-19 00:02:56,127
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-19 12:02:53,200
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-19 12:02:55,459
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-20 00:02:53,205
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-20 00:02:55,728
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-20 12:02:53,214
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-20 12:02:55,489
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-21 00:02:53,218
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-21 00:02:55,540
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-21 12:02:53,221
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-21 12:02:55,320
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-22 00:02:53,259
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-22 00:02:56,419
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-22 12:02:53,265
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-22 12:02:55,497
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-23 00:02:53,269
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-23 00:03:00,348
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-23 12:02:53,273
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-23 12:02:55,547
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-24 00:02:53,283
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-24 00:02:55,524
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-24 12:02:53,291
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-24 12:02:55,608
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-25 00:02:53,290
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-25 00:02:55,611
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-25 12:02:53,339
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-25 12:02:55,805
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-26 00:02:53,343
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-26 00:02:55,763
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-26 12:02:53,357
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-26 12:02:55,807
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-27 00:02:53,355
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-27 00:02:56,053
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-27 12:02:53,364
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-27 12:02:55,498
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-28 00:02:53,395
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-28 00:02:55,907
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-28 12:02:53,397
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-28 12:02:55,659
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-29 00:02:53,398
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-29 00:02:55,553
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-29 12:02:53,566
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-29 12:02:55,945
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-30 00:02:53,570
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-30 00:02:55,939
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-30 12:02:53,574
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-30 12:02:55,802
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-31 00:02:53,582
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-31 00:02:56,040
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-31 12:02:53,585
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-31 12:02:56,010
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-01 00:02:53,587
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-01 00:02:55,848
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-01 12:02:53,598
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-01 12:02:55,882
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-02 00:02:53,601
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-02 00:02:55,941
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-02 12:02:53,605
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-02 12:02:55,934
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-03 00:02:53,607
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-03 00:02:56,804
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-03 12:02:53,615
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-03 12:02:55,875
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-04 00:02:53,642
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-04 00:02:56,088
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-04 12:02:53,643
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-04 12:02:55,884
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-05 00:02:53,646
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-05 00:02:55,868
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-05 12:02:53,648
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-05 12:02:55,899
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-06 00:02:53,651
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-06 00:02:56,028
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-06 12:02:53,983
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-06 12:02:56,561
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-07 00:02:53,987
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-07 00:02:57,991
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-07 12:02:53,997
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-07 12:02:56,475
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-08 00:02:54,005
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-08 00:02:56,849
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-08 12:02:54,007
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-08 12:02:56,364
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-09 00:02:54,009
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-09 00:02:56,350
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-09 12:02:54,014
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-09 12:02:56,251
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-10 00:02:54,015
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-10 00:02:56,519
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-10 12:02:54,017
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-10 12:02:56,603
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-11 00:02:54,032
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-11 00:02:56,648
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-11 12:02:54,025
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-11 12:02:56,630
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-12 00:02:54,031
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-12 00:02:56,403
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-12 12:02:54,036
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-12 12:02:56,621
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-13 00:02:54,040
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-13 00:02:56,475
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-13 12:02:54,045
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-13 12:02:56,625
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-14 00:02:54,048
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-14 00:02:56,453
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-14 12:02:54,052
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-14 12:02:56,729
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-15 00:02:54,056
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-15 00:02:57,797
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-15 12:02:54,059
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-15 12:02:56,429
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-16 00:02:54,067
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-16 00:02:56,857
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-16 12:02:54,076
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-16 12:02:56,620
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-17 00:02:54,079
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-17 00:02:57,138
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-17 12:02:54,081
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-17 12:02:56,498
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-18 00:02:54,083
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-18 00:02:56,577
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-18 12:02:54,096
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-18 12:02:56,611
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-19 00:02:54,098
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-19 00:02:56,611
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-19 12:02:54,102
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-19 12:02:56,810
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-20 00:02:54,107
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-20 00:02:56,824
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-20 12:02:54,119
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-20 12:02:56,660
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-21 00:02:54,124
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-21 00:02:56,848
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-21 12:02:54,134
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-21 12:02:56,579
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-22 00:02:54,139
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-22 00:02:56,831
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-22 12:02:54,154
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-22 12:02:56,441
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-23 00:02:54,157
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-23 00:02:57,918
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-23 12:02:54,166
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-23 12:02:56,635
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-24 00:02:54,174
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-24 00:02:56,882
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-24 12:02:54,173
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-24 12:02:57,330
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-25 00:02:54,175
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-25 00:02:56,862
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-25 12:02:54,187
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-25 12:02:56,757
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-26 00:02:54,210
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-26 00:02:56,788
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-26 12:02:54,216
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-26 12:02:56,738
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-27 00:02:54,225
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-27 00:02:56,866
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-27 12:02:54,230
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-27 12:02:56,939
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-28 00:02:54,227
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-28 00:02:56,760
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-28 12:02:54,236
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-28 12:02:56,999
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-29 00:02:54,241
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-29 00:02:56,631
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-29 12:02:54,240
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-29 12:02:56,954
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-30 00:02:54,242
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-30 00:02:57,057
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-30 12:02:54,243
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-30 12:02:56,582
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-01 00:02:54,287
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-01 00:02:57,819
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-01 12:02:54,300
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-01 12:02:56,999
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-02 00:02:54,291
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-02 00:02:56,933
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-02 12:02:54,292
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-02 12:02:56,839
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-03 00:02:54,297
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-03 00:02:56,980
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-03 12:02:54,302
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-03 12:02:56,991
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-04 00:02:54,306
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-04 00:02:56,928
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-04 12:02:54,310
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-04 12:02:56,928
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-05 00:02:54,311
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-05 00:02:57,191
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-05 12:02:54,313
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-05 12:02:56,959
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-06 00:02:54,325
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-06 00:02:57,489
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-06 12:02:54,334
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-06 12:02:56,928
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-07 00:02:54,337
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-07 00:02:57,124
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-07 12:02:54,342
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-07 12:02:57,044
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-08 00:02:54,343
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-08 00:02:57,381
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-08 12:02:54,347
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-08 12:02:56,978
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-09 00:02:54,353
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-09 00:02:57,090
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-09 12:02:54,353
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-09 12:02:58,035
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-10 00:02:54,354
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-10 00:02:57,021
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-10 12:02:54,357
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-10 12:02:57,495
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-11 00:02:54,360
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-11 00:02:57,098
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-11 12:02:54,363
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-11 12:02:58,031
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-12 00:02:54,364
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-12 00:02:57,232
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-12 12:02:54,372
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-12 12:02:56,848
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-13 00:02:54,376
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-13 00:02:57,286
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-13 12:02:54,379
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-13 12:02:57,147
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-14 00:02:54,388
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-14 00:02:57,105
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-14 12:02:54,393
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-14 12:02:56,878
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-15 00:02:54,396
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-15 00:02:56,947
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-15 12:02:54,400
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-15 12:02:57,043
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-15 20:45:46,296
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-15 20:45:46,309
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-15 20:45:47,616
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-15 20:45:47,664
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-15 20:45:47,830
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-15 20:45:47,858
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-15 20:45:55,414
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-15 20:45:55,431
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-15 20:45:56,668
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-15 20:45:56,702
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-15 20:45:58,867
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-15 20:45:58,898
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-16 00:02:54,431
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-16 00:02:57,282
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-16 12:02:54,433
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-16 12:02:57,038
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-17 00:02:54,436
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-17 00:02:58,141
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-17 12:02:54,438
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-17 12:02:57,064
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-18 00:02:54,443
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-18 00:02:57,183
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-18 12:02:54,447
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-18 12:02:57,045
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-19 00:02:54,457
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-19 00:02:57,497
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-19 12:02:54,462
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-19 12:02:57,144
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-20 00:02:54,463
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-20 00:02:57,278
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-20 12:02:54,467
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-20 12:02:58,361
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-21 00:02:54,471
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-21 00:02:57,433
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-21 12:02:54,476
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-21 12:02:57,569
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-22 00:02:54,483
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-22 00:02:58,404
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-22 12:02:54,494
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-22 12:02:57,262
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-23 00:02:54,496
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-23 00:03:01,318
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-23 03:38:49,831
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-23 03:38:49,844
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-23 03:38:51,335
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-23 03:38:51,369
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-23 03:38:51,537
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-23 03:38:51,591
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-23 03:38:59,817
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-23 03:38:59,850
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-23 03:39:01,223
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-23 03:39:01,269
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-23 12:02:54,499
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-23 12:02:58,275
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

profiler.py:112: WARNING
kaiten.profiler.Profiler:tick
1970-05-23 22:14:02,016
Unusually long generator MachineManager lasted 0:00:02.012390

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-24 00:02:54,504
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-24 00:02:57,524
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-24 00:45:07,311
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-24 00:45:07,333
Property Connected unhandled, no notification

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-24 00:45:09,394
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-24 00:45:09,406
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-24 00:45:10,440
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-24 00:45:10,478
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-24 00:45:10,988
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-24 00:45:11,032
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-24 00:45:12,453
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-24 00:45:12,485
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-24 12:02:54,508
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-24 12:02:57,393
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-24 18:07:20,799
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-24 18:07:20,812
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-24 18:07:22,405
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-24 18:07:22,442
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-24 18:07:22,610
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-24 18:07:22,657
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-24 18:07:30,437
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-05-24 18:07:30,451
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-24 18:07:31,760
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-24 18:07:31,793
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-05-24 18:08:04,424
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-05-24 18:08:04,455
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-25 00:02:54,509
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-25 00:02:57,208
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-25 12:02:54,511
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-25 12:02:57,085
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-26 00:02:54,525
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-26 00:02:57,297
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-26 12:02:54,531
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-26 12:02:57,592
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-27 00:02:54,539
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-27 00:02:57,244
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-27 12:02:54,551
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-27 12:02:57,376
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-28 00:02:54,553
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-28 00:02:57,405
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-28 12:02:54,607
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-28 12:02:58,858
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-29 00:02:54,609
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-29 00:02:57,367
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-29 12:02:54,615
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-29 12:02:57,236
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-30 00:02:54,619
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-30 00:02:57,427
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-30 12:02:54,624
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-30 12:02:57,296
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-31 00:02:54,629
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-31 00:02:57,362
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-05-31 12:02:54,631
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-05-31 12:02:57,341
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-01 00:02:54,633
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-01 00:02:57,341
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-01 12:02:54,645
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-01 12:02:57,281
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-02 00:02:54,649
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-02 00:02:57,682
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-02 12:02:54,664
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-02 12:02:57,340
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-03 00:02:54,686
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-03 00:02:57,460
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-03 12:02:54,696
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-03 12:02:57,345
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-04 00:02:54,716
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-04 00:02:57,434
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-04 12:02:54,826
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-04 12:02:57,835
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-05 00:02:54,839
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-05 00:02:58,447
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-05 12:02:54,840
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-05 12:02:57,571
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-06 00:02:54,853
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-06 00:02:57,879
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-06 12:02:54,854
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-06 12:02:57,493
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-07 00:02:54,872
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-07 00:02:57,803
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-07 12:02:54,871
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-07 12:02:57,602
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-08 00:02:54,876
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-08 00:02:57,540
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-08 12:02:54,881
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-08 12:02:57,441
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-09 00:02:54,884
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-09 00:02:57,814
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-06-09 12:02:54,886
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-06-09 12:02:57,907
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

main.py:29: INFO
kaiten.main:log_startup
1970-01-01 00:01:24,891
kaiten 1.9.0 started

main.py:30: INFO
kaiten.main:log_startup
1970-01-01 00:01:24,994
process id: 639

main.py:31: INFO
kaiten.main:log_startup
1970-01-01 00:01:25,056
python version: '3.4.3 (default, Nov 22 2016, 17:44:19) \n[GCC 4.8.1 20130401 (prerelease)]'

server.py:80: INFO
kaiten.server.Server:__init__
1970-01-01 00:01:26,030
Kaiten starting with firmware version 2.6.2.734

machine_manager.py:99: INFO
kaiten.machine_manager.MachineManager:__init__
1970-01-01 00:01:26,409
count: 1

machine_manager.py:101: INFO
kaiten.machine_manager.MachineManager:__init__
1970-01-01 00:01:26,443
Initialized configured tools to [<mbcoreutils.tool_mappings.Tool object at 0xb6229090>]

machine_manager.py:438: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:28,981
Updating settings for [<mbcoreutils.tool_mappings.Tool object at 0xb6229090>]

machine_manager.py:449: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:29,004
Generating settings for tool mk13

machine_manager.py:467: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:29,068
Generated config {'nozzle_diameter': 0.40000000000000002, 'max_speed_mm_per_second': {'a': 8.0}, 'materials': {'pla': {'linear_density': 0.0030999999999999999, 'retract_rate': 50, 'retract_distance': 0.5, 'toolheads': {'bronx': {'heater': {'print_temperature_default': 215, 'sag_temperature_threshold': 20, 'rise_timeout_min': 1, 'overrun_temperature_threshold': 20, 'at_temp_timeout_min': 3, 'fan_preload': 15, 'rise_temperature_threshold': 10, 'preload_tick_delay': 8900, 'wait_for_target_timeout': 5, 'preheat_temperature': 180}}}, 'temperature': 215, 'restart_rate': 30, 'acceleration': {'extruder_relax_decay_time': 300, 'impulse_speed_limit_mm_per_s': {'a': 3.0}, 'max_speed_change_mm_per_s': {'a': 0.5}, 'rate_mm_per_s_sq': {'a': 10.0}, 'motor_damping_rshift': 4, 'velocity_error_lshift': 2, 'extruder_relax_shift_offset': 1, 'extruder_responsiveness_rshift': 7, 'min_speed_change_mm_per_s': {'a': 0.01}, 'slip_compensation_table': [[0, 0], [0.48770000000000002, 0.52149999999999996], [0.73150000000000004, 0.78159999999999996], [0.97540000000000004, 1.042], [1.4631000000000001, 1.5563], [1.9508000000000001, 2.0581], [2.4384999999999999, 2.5665], [2.9260999999999999, 3.0358999999999998], [3.4138000000000002, 3.3925000000000001], [3.9015, 3.7065000000000001], [4.3891999999999998, 3.9777], [4.8769999999999998, 4.2672999999999996], [5.3646000000000003, 4.8449], [6.8277000000000001, 6.8277000000000001], [7.8030999999999997, 8.5833999999999993], [8.7783999999999995, 10.0952], [100, 100]]}, 'feed_diameter': 1.77, 'ooze_feedstock_distance': 0.10000000000000001, 'max_flow_rate': 5.0}}, 'material_default': 'pla', 'home': {'retract_distance_mm': 40.0, 'restart_distance_mm': 40.0}, 'filament': {'unload_distance_two': 50, 'load_speed': 6, 'unload_delay': 10, 'unload_distance_one': 40, 'load_distance': 100, 'unload_speed_two': 10, 'unload_speed_one': 95, 'auto_unload_distance': 80}, 'steps_per_mm': {'a': 108.55}}

machine_manager.py:473: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:29,109
Updating settings for material pla

machine_manager.py:282: INFO
kaiten.machine_manager.MachineManager:create_pymachine
1970-01-01 00:01:32,950
libmachine initialized from config

server.py:163: INFO
kaiten.server.Server:__init__
1970-01-01 00:01:33,129
Listening to usb descriptor at address /dev/g_3dprinter

bwcamera.py:253: INFO
kaiten.bwcamera.CameraContract:__next__
1970-01-01 00:01:33,953
Started camera stream

server.py:760: INFO
kaiten.server.Server:run
1970-01-01 00:01:34,913
Running Server

dbus.py:1073: INFO
kaiten.dbus.DBusManager:_init_wifi
1970-01-01 00:01:37,291
DBus wifi initialized

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:37,402
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:37,425
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:38,727
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:38,760
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:40,727
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:40,761
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:42,733
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:42,757
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:44,736
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:44,763
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:46,762
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:46,786
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:48,759
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:48,793
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:50,777
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:50,813
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:52,801
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:52,825
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:54,797
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:54,830
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

fontdownload.py:109: INFO
kaiten.fontdownload.FontDownload:__next__
1970-01-01 00:01:54,942
Font download complete

scheduler.py:368: ERROR
kaiten.scheduler.ContractGeneratorManager:run
1970-01-01 00:01:54,965
Evicting FontDownload due to unhandled exception
Traceback (most recent call last):
  File "/usr/lib/python3.4/site-packages/kaiten/scheduler.py", line 362, in run
    next(contract.generator)
  File "/usr/lib/python3.4/site-packages/kaiten/fontdownload.py", line 111, in __next__
    {'available_languages': FontDownload.ui_cjk_langs})
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 989, in notify_client
    client = self._get_client(client)
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 975, in _get_client
    raise Exception(getattr(client, 'name', client) + ' not connected')
Exception: lcd not connected
dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:56,812
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:56,837
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:58,807
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:58,842
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:00,830
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:00,853
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:02,827
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:02,860
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:04,838
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:04,871
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:06,862
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:06,885
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:08,858
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:08,892
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:10,900
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:10,924
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:12,897
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:12,918
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:14,906
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:14,944
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:17,557
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:17,591
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:19,573
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:19,597
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:21,576
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:21,611
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:23,598
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:23,631
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:25,612
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:25,635
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:27,627
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:27,660
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:29,640
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:29,664
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:31,649
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:31,682
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

machine_manager.py:2201: INFO
kaiten.machine_manager.MachineManager:resume_boot
1970-01-01 00:02:33,523
Resuming boot sequence

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:33,903
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:33,928
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

machine_manager.py:1198: INFO
kaiten.machine_manager.MachineManager:get_tool_usage_stats
1970-01-01 00:02:34,245
Finding stats {'extrusion_time_s': 477374, 'serial': 82994, 'retract_count': 3908090788, 'refurb_count': 0, 'extrusion_distance_mm': 99164739}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:35,940
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:35,965
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:37,912
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:37,942
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:39,940
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:39,964
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:44,719
Queried dbus network state

dbus.py:977: INFO
kaiten.dbus.DBusManager:_initialize_bus
1970-01-01 00:02:45,173
DBus initialized

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:45,388
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:02:45,443
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1047: INFO
kaiten.dbus.DBusManager:_initialize_discovery
1970-01-01 00:02:45,932
Bringing up MDNS/SD discovery advertising...

dbus.py:1059: INFO
kaiten.dbus.DBusManager:_initialize_discovery
1970-01-01 00:02:47,128
mDNS/SD discovery online as Makerbot-02A6AF

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-01 00:02:56,402
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-01 00:02:56,435
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:57,887
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:02:57,951
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-01 00:02:57,991
Checking firmware updates

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:03:03,531
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:03:03,579
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-01 00:03:06,594
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

server.py:1491: INFO
kaiten.server.Server:register_fcgi
1970-01-01 00:03:39,854
Registered fcgi

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-01 12:02:57,990
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-01 12:02:59,689
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-02 00:02:57,996
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-02 00:02:59,759
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-02 12:02:57,993
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-02 12:02:59,675
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-03 00:02:57,995
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-03 00:03:00,374
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

main.py:29: INFO
kaiten.main:log_startup
1970-01-01 00:01:24,926
kaiten 1.9.0 started

main.py:30: INFO
kaiten.main:log_startup
1970-01-01 00:01:25,042
process id: 639

main.py:31: INFO
kaiten.main:log_startup
1970-01-01 00:01:25,104
python version: '3.4.3 (default, Nov 22 2016, 17:44:19) \n[GCC 4.8.1 20130401 (prerelease)]'

server.py:80: INFO
kaiten.server.Server:__init__
1970-01-01 00:01:26,064
Kaiten starting with firmware version 2.6.2.734

machine_manager.py:99: INFO
kaiten.machine_manager.MachineManager:__init__
1970-01-01 00:01:26,480
count: 1

machine_manager.py:101: INFO
kaiten.machine_manager.MachineManager:__init__
1970-01-01 00:01:26,505
Initialized configured tools to [<mbcoreutils.tool_mappings.Tool object at 0xb6282090>]

machine_manager.py:438: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:28,992
Updating settings for [<mbcoreutils.tool_mappings.Tool object at 0xb6282090>]

machine_manager.py:449: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:29,015
Generating settings for tool mk13

machine_manager.py:467: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:29,091
Generated config {'nozzle_diameter': 0.40000000000000002, 'max_speed_mm_per_second': {'a': 8.0}, 'materials': {'pla': {'linear_density': 0.0030999999999999999, 'retract_rate': 50, 'retract_distance': 0.5, 'toolheads': {'bronx': {'heater': {'print_temperature_default': 215, 'sag_temperature_threshold': 20, 'rise_timeout_min': 1, 'overrun_temperature_threshold': 20, 'at_temp_timeout_min': 3, 'fan_preload': 15, 'rise_temperature_threshold': 10, 'preload_tick_delay': 8900, 'wait_for_target_timeout': 5, 'preheat_temperature': 180}}}, 'temperature': 215, 'restart_rate': 30, 'acceleration': {'extruder_relax_decay_time': 300, 'impulse_speed_limit_mm_per_s': {'a': 3.0}, 'max_speed_change_mm_per_s': {'a': 0.5}, 'rate_mm_per_s_sq': {'a': 10.0}, 'motor_damping_rshift': 4, 'velocity_error_lshift': 2, 'extruder_relax_shift_offset': 1, 'extruder_responsiveness_rshift': 7, 'min_speed_change_mm_per_s': {'a': 0.01}, 'slip_compensation_table': [[0, 0], [0.48770000000000002, 0.52149999999999996], [0.73150000000000004, 0.78159999999999996], [0.97540000000000004, 1.042], [1.4631000000000001, 1.5563], [1.9508000000000001, 2.0581], [2.4384999999999999, 2.5665], [2.9260999999999999, 3.0358999999999998], [3.4138000000000002, 3.3925000000000001], [3.9015, 3.7065000000000001], [4.3891999999999998, 3.9777], [4.8769999999999998, 4.2672999999999996], [5.3646000000000003, 4.8449], [6.8277000000000001, 6.8277000000000001], [7.8030999999999997, 8.5833999999999993], [8.7783999999999995, 10.0952], [100, 100]]}, 'feed_diameter': 1.77, 'ooze_feedstock_distance': 0.10000000000000001, 'max_flow_rate': 5.0}}, 'material_default': 'pla', 'home': {'retract_distance_mm': 40.0, 'restart_distance_mm': 40.0}, 'filament': {'unload_distance_two': 50, 'load_speed': 6, 'unload_delay': 10, 'unload_distance_one': 40, 'load_distance': 100, 'unload_speed_two': 10, 'unload_speed_one': 95, 'auto_unload_distance': 80}, 'steps_per_mm': {'a': 108.55}}

machine_manager.py:473: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:29,132
Updating settings for material pla

machine_manager.py:282: INFO
kaiten.machine_manager.MachineManager:create_pymachine
1970-01-01 00:01:32,897
libmachine initialized from config

server.py:163: INFO
kaiten.server.Server:__init__
1970-01-01 00:01:33,091
Listening to usb descriptor at address /dev/g_3dprinter

bwcamera.py:253: INFO
kaiten.bwcamera.CameraContract:__next__
1970-01-01 00:01:33,924
Started camera stream

server.py:760: INFO
kaiten.server.Server:run
1970-01-01 00:01:34,838
Running Server

dbus.py:1073: INFO
kaiten.dbus.DBusManager:_init_wifi
1970-01-01 00:01:37,253
DBus wifi initialized

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:37,366
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:37,400
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:38,687
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:38,721
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:40,695
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:40,728
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:42,708
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:42,742
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:44,726
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:44,761
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:46,728
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:46,772
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:48,736
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:48,770
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:50,739
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:50,768
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:52,757
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:52,792
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:54,774
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:54,787
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

fontdownload.py:109: INFO
kaiten.fontdownload.FontDownload:__next__
1970-01-01 00:01:54,846
Font download complete

scheduler.py:368: ERROR
kaiten.scheduler.ContractGeneratorManager:run
1970-01-01 00:01:54,878
Evicting FontDownload due to unhandled exception
Traceback (most recent call last):
  File "/usr/lib/python3.4/site-packages/kaiten/scheduler.py", line 362, in run
    next(contract.generator)
  File "/usr/lib/python3.4/site-packages/kaiten/fontdownload.py", line 111, in __next__
    {'available_languages': FontDownload.ui_cjk_langs})
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 989, in notify_client
    client = self._get_client(client)
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 975, in _get_client
    raise Exception(getattr(client, 'name', client) + ' not connected')
Exception: lcd not connected
dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:56,766
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:56,802
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:58,777
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:58,811
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:00,787
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:00,823
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:02,797
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:02,831
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:04,803
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:04,828
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:06,806
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:06,841
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:08,812
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:08,835
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:10,826
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:10,871
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:12,820
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:12,844
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:14,816
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:14,850
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:17,581
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:17,606
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:19,583
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:19,607
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:21,591
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:21,614
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:23,586
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:23,622
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:25,600
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:25,628
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:27,597
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:27,633
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:29,599
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:29,633
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:31,606
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:31,650
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

machine_manager.py:2201: INFO
kaiten.machine_manager.MachineManager:resume_boot
1970-01-01 00:02:32,563
Resuming boot sequence

machine_manager.py:1198: INFO
kaiten.machine_manager.MachineManager:get_tool_usage_stats
1970-01-01 00:02:33,079
Finding stats {'extrusion_time_s': 477374, 'serial': 82994, 'retract_count': 3908090788, 'refurb_count': 0, 'extrusion_distance_mm': 99164739}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:33,675
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:33,709
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:35,678
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:35,721
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:37,684
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:37,736
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:43,737
Queried dbus network state

dbus.py:977: INFO
kaiten.dbus.DBusManager:_initialize_bus
1970-01-01 00:02:44,837
DBus initialized

dbus.py:1047: INFO
kaiten.dbus.DBusManager:_initialize_discovery
1970-01-01 00:02:45,038
Bringing up MDNS/SD discovery advertising...

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:45,839
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:02:45,901
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1059: INFO
kaiten.dbus.DBusManager:_initialize_discovery
1970-01-01 00:02:47,342
mDNS/SD discovery online as Makerbot-02A6AF

server.py:1491: INFO
kaiten.server.Server:register_fcgi
1970-01-01 00:03:19,539
Registered fcgi

dbus.py:937: INFO
kaiten.dbus.DBusManager:_reconnector
1970-01-01 00:03:33,857
Toggle wifi off, network state {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:867: INFO
kaiten.dbus.DBusManager:_try_toggle
1970-01-01 00:03:33,876
toggle wifi off

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-01 00:03:34,252
wifi technology change: Powered->0

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:03:34,268
notifying clients of network state: {'state': 'offline', 'wifi': 'disabled', 'tethering': False, 'tether_name': ''}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-01 00:04:34,697
wifi technology change: Powered->1

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:04:34,734
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-01 00:04:38,191
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-01 00:04:38,235
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:04:39,068
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:04:39,128
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-01 00:04:39,177
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-01 00:04:41,907
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:04:47,705
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:04:47,745
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-01 12:04:39,182
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-01 12:04:40,878
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-02 00:04:39,183
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-02 00:04:41,567
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-02 12:04:39,186
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-02 12:04:40,803
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-03 00:04:39,189
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-03 00:04:40,865
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-03 12:04:39,204
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-03 12:04:40,921
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-04 00:04:39,206
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-04 00:04:40,909
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-04 12:04:39,209
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-04 12:04:40,866
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-05 00:04:39,215
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-05 00:04:40,985
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-05 12:04:39,218
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-05 12:04:40,859
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-06 00:04:39,221
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-06 00:04:41,947
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-06 12:04:39,223
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-06 12:04:40,803
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-07 00:04:39,229
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-07 00:04:40,979
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-07 12:04:39,228
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-07 12:04:40,844
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-08 00:04:39,238
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-08 00:04:41,221
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-08 12:04:39,241
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-08 12:04:40,892
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-09 00:04:39,247
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-09 00:04:40,931
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-09 12:04:39,249
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-09 12:04:40,887
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-10 00:04:39,252
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-10 00:04:40,929
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-10 12:04:39,256
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-10 12:04:40,887
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-11 00:04:39,259
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-11 00:04:40,885
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-11 12:04:39,263
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-11 12:04:41,514
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-11 22:33:40,072
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-11 22:33:40,195
Property Connected unhandled, no notification

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-11 22:33:41,085
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-11 22:33:41,147
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-11 22:33:42,408
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-11 22:33:42,444
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-11 22:33:42,548
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-11 22:33:42,592
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-11 22:33:42,657
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-11 22:33:42,696
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-12 00:04:39,269
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-12 00:04:41,093
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-12 12:04:39,272
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-12 12:04:40,899
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-13 00:04:39,275
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-13 00:04:41,009
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-13 12:04:39,281
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-13 12:04:40,855
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-14 00:04:39,294
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-14 00:04:41,087
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-14 12:04:39,298
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-14 12:04:40,940
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-15 00:04:39,310
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-15 00:04:41,151
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-15 12:04:39,302
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-15 12:04:40,925
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-16 00:04:39,308
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-16 00:04:41,102
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-16 12:04:39,316
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-16 12:04:41,133
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-17 00:04:39,320
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-17 00:04:41,093
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-17 12:04:39,322
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-17 12:04:40,957
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-18 00:04:39,326
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-18 00:04:41,063
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-18 12:04:39,333
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-18 12:04:41,063
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-19 00:04:39,341
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-19 00:04:41,159
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-19 12:04:39,340
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-19 12:04:40,976
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-20 00:04:39,344
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-20 00:04:41,157
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-20 12:04:39,702
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-20 12:04:41,487
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-21 00:04:39,707
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-21 00:04:41,495
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-21 12:04:39,721
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-21 12:04:41,484
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-22 00:04:39,726
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-22 00:04:41,538
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-22 12:04:39,728
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-22 12:04:41,400
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-23 00:04:39,734
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-23 00:04:41,551
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-23 12:04:39,736
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-23 12:04:41,445
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-24 00:04:39,740
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-24 00:04:41,465
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-24 12:04:39,747
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-24 12:04:41,484
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-25 00:04:39,748
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-25 00:04:41,491
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-25 12:04:39,755
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-25 12:04:41,511
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-26 00:04:39,765
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-26 00:04:41,686
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-26 12:04:39,758
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-26 12:04:41,617
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-27 00:04:39,761
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-27 00:04:41,548
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-27 12:04:39,764
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-27 12:04:41,571
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-28 00:04:39,775
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-28 00:04:41,534
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-28 12:04:39,780
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-28 12:04:41,552
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-29 00:04:39,785
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-29 00:04:42,700
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-29 12:04:39,789
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-29 12:04:41,553
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-30 00:04:39,798
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-30 00:04:41,650
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-30 12:04:39,799
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-30 12:04:41,588
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-31 00:04:39,803
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-31 00:04:41,567
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-31 12:04:39,805
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-31 12:04:41,449
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-01 00:04:39,806
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-01 00:04:41,679
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-01 12:04:39,808
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-01 12:04:41,582
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-02 00:04:39,810
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-02 00:04:41,713
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-02 12:04:39,814
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-02 12:04:41,658
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-03 00:04:39,822
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-03 00:04:42,551
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-03 12:04:39,821
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-03 12:04:41,519
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-04 00:04:39,825
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-04 00:04:41,879
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-04 12:04:39,829
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-04 12:04:41,492
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-05 00:04:39,832
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-05 00:04:41,902
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-05 12:04:39,838
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-05 12:04:41,692
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-06 00:04:40,105
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-06 00:04:42,041
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-06 12:04:40,108
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-06 12:04:41,855
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-07 00:04:40,116
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-07 00:04:41,968
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-07 12:04:40,119
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-07 12:04:41,968
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-08 00:04:40,121
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-08 00:04:42,001
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-08 12:04:40,125
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-08 12:04:41,977
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-09 00:04:40,126
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-09 00:04:42,066
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-09 12:04:40,131
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-09 12:04:41,984
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-10 00:04:40,141
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-10 00:04:42,445
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-10 12:04:40,136
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-10 12:04:41,997
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-11 00:04:40,142
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-11 00:04:42,307
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-11 12:04:40,144
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-11 12:04:42,159
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-12 00:04:40,144
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-12 00:04:42,124
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-12 12:04:40,150
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-12 12:04:42,044
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-13 00:04:40,153
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-13 00:04:42,034
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-13 12:04:40,153
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-13 12:04:42,200
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-14 00:04:40,155
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-14 00:04:41,963
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-14 12:04:40,176
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-14 12:04:43,024
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-15 00:04:40,177
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-15 00:04:42,326
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-15 12:04:40,184
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-15 12:04:42,326
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-16 00:04:40,189
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-16 00:04:42,261
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-16 12:04:40,205
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-16 12:04:42,334
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-17 00:04:40,207
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-17 00:04:42,144
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-17 12:04:40,212
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-17 12:04:42,275
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-18 00:04:40,228
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-18 00:04:42,244
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-18 12:04:40,230
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-18 12:04:42,265
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-19 00:04:40,233
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-19 00:04:42,152
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-19 12:04:40,239
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-19 12:04:42,270
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-20 00:04:40,252
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-20 00:04:42,236
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-20 12:04:40,244
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-20 12:04:42,187
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-21 00:04:40,253
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-21 00:04:42,133
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-21 12:04:40,256
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-21 12:04:42,043
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-22 00:04:40,259
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-22 00:04:42,190
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-22 12:04:40,260
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-22 12:04:43,456
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-23 00:04:40,265
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-23 00:04:42,341
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-23 12:04:40,268
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-23 12:04:42,301
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-24 00:04:40,271
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-24 00:04:42,239
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-24 12:04:40,274
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-24 12:04:42,371
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-25 00:04:40,276
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-25 00:04:42,327
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-25 12:04:40,277
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-25 12:04:42,129
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-26 00:04:40,286
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-26 00:04:42,599
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-26 12:04:40,287
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-26 12:04:42,178
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-27 00:04:40,293
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-27 00:04:42,566
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-27 12:04:40,301
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-27 12:04:42,297
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-28 00:04:40,298
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-28 00:04:42,095
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-02-28 12:04:40,299
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-02-28 12:04:47,408
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-01 00:04:40,303
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-01 00:04:42,265
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-01 12:04:40,308
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-01 12:04:47,221
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-02 00:04:40,318
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-02 00:04:42,646
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-02 12:04:40,324
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-02 12:04:42,375
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-03 00:04:40,328
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-03 00:04:43,961
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-03 12:04:40,334
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-03 12:04:42,277
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-04 00:04:40,337
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-04 00:04:42,309
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-04 12:04:40,343
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-04 12:04:42,276
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-05 00:04:40,349
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-05 00:04:42,314
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-05 12:04:40,352
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-05 12:04:42,487
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-06 00:04:40,355
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-06 00:04:43,037
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-06 12:04:40,358
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-06 12:04:42,516
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-07 00:04:40,363
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-07 00:04:42,261
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-07 12:04:40,365
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-07 12:04:42,546
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-08 00:04:40,371
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-08 00:04:42,413
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-08 12:04:40,375
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-08 12:04:43,903
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-09 00:04:40,378
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-09 00:04:43,265
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-09 12:04:40,380
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-09 12:04:42,707
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-10 00:04:40,385
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-10 00:04:42,919
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-10 12:04:40,388
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-10 12:04:42,407
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-11 00:04:40,409
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-11 00:04:43,302
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-11 12:04:40,410
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-11 12:04:42,440
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-12 00:04:40,413
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-12 00:04:42,723
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-12 12:04:40,416
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-12 12:04:42,715
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-13 00:04:40,419
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-13 00:04:42,803
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-13 12:04:40,424
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-13 12:04:42,454
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-14 00:04:40,439
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-14 00:04:42,475
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-14 12:04:40,439
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-14 12:04:42,636
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-15 00:04:40,442
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-15 00:04:42,718
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-15 12:04:40,442
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-15 12:04:42,616
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-16 00:04:40,446
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-16 00:04:42,817
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-16 12:04:40,452
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-16 12:04:42,682
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-17 00:04:40,460
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-17 00:04:42,988
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-17 12:04:40,458
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-17 12:04:42,618
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-18 00:04:40,459
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-18 00:04:43,006
got latest firmware 2.6.2.734, current 2.6.2.734, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-18 12:04:40,467
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-18 12:04:42,780
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:277: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-18 12:04:42,803
Downloading latest firmware 2.6.3.736

util.py:526: INFO
kaiten.util.FileDownload:start
1970-03-18 12:04:45,189
Starting file download: https://s3.amazonaws.com/firmware-makerbot-com/bwfw/firmware_replicator_release_2_6_3_736_11.zip

profiler.py:112: WARNING
kaiten.profiler.Profiler:tick
1970-03-18 12:04:45,252
Unusually long generator HTTPIOGenerator lasted 0:00:02.631241

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:05:42,829
Firmware download progress 5

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:06:42,833
Firmware download progress 10

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:07:42,835
Firmware download progress 15

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:08:42,841
Firmware download progress 21

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:09:42,843
Firmware download progress 26

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:10:42,845
Firmware download progress 31

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:11:42,849
Firmware download progress 37

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:12:42,851
Firmware download progress 42

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:13:42,853
Firmware download progress 47

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:14:42,855
Firmware download progress 53

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:15:42,857
Firmware download progress 58

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:16:42,863
Firmware download progress 63

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:17:42,876
Firmware download progress 69

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:18:42,879
Firmware download progress 74

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:19:42,882
Firmware download progress 79

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:20:42,900
Firmware download progress 85

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:21:42,901
Firmware download progress 90

firmwareupdates.py:80: INFO
kaiten.firmwareupdates.FirmwareUpdates:__next__
1970-03-18 12:22:42,901
Firmware download progress 95

firmwareupdates.py:186: INFO
kaiten.firmwareupdates.FirmwareUpdates:_download_success
1970-03-18 12:23:26,911
Firmware download complete

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-19 00:23:26,947
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-19 00:23:29,474
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-19 00:23:29,495
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-19 12:23:26,948
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-19 12:23:29,295
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-19 12:23:29,317
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-20 00:23:26,956
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-20 00:23:29,548
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-20 00:23:29,571
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-20 12:23:26,959
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-20 12:23:29,424
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-20 12:23:29,444
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-21 00:23:26,962
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-21 00:23:29,190
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-21 00:23:29,208
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-21 12:23:26,964
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-21 12:23:29,324
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-21 12:23:29,344
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-22 00:23:26,967
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-22 00:23:29,268
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-22 00:23:29,287
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-22 12:23:26,968
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-22 12:23:29,194
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-22 12:23:29,213
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-23 00:23:26,973
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-23 00:23:29,184
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-23 00:23:29,204
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-23 12:23:26,976
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-23 12:23:29,180
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-23 12:23:29,199
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-24 00:23:26,992
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-24 00:23:29,522
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-24 00:23:29,540
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-24 12:23:26,996
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-24 12:23:29,231
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-24 12:23:29,250
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-25 00:23:27,007
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-25 00:23:29,533
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-25 00:23:29,555
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-25 12:23:27,015
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-25 12:23:29,376
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-25 12:23:29,395
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-26 00:23:27,016
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-26 00:23:29,627
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-26 00:23:29,661
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-26 12:23:27,017
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-26 12:23:30,659
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-26 12:23:30,677
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-27 00:23:27,019
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-27 00:23:29,697
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-27 00:23:29,724
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-27 12:23:27,023
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-27 12:23:29,439
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-27 12:23:29,458
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-28 00:23:27,025
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-28 00:23:29,815
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-28 00:23:29,841
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-28 12:23:27,029
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-28 12:23:29,422
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-28 12:23:29,442
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-29 00:23:27,037
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-29 00:23:29,416
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-29 00:23:29,435
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-29 12:23:27,040
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-29 12:23:29,491
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-29 12:23:29,509
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-30 00:23:27,041
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-30 00:23:29,728
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-30 00:23:29,754
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-30 12:23:27,045
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-30 12:23:29,604
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-30 12:23:29,623
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-31 00:23:27,048
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-31 00:23:29,502
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-31 00:23:29,526
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-03-31 12:23:27,051
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-31 12:23:29,449
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-03-31 12:23:29,474
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-01 00:23:27,063
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-01 00:23:29,657
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-01 00:23:29,681
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-01 12:23:27,066
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-01 12:23:29,562
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-01 12:23:29,584
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-02 00:23:27,071
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-02 00:23:29,784
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-02 00:23:29,804
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-02 12:23:27,074
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-02 12:23:29,941
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-02 12:23:29,960
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-03 00:23:27,101
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-03 00:23:29,868
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-03 00:23:29,899
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-03 12:23:27,097
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-03 12:23:29,473
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-03 12:23:29,492
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-04 00:23:27,102
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-04 00:23:30,276
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-04 00:23:30,294
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-04 12:23:27,105
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-04 12:23:29,624
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-04 12:23:29,642
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-05 00:23:27,107
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-05 00:23:29,645
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-05 00:23:29,664
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-05 12:23:27,108
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-05 12:23:29,549
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-05 12:23:29,572
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-06 00:23:27,111
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-06 00:23:30,195
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-06 00:23:30,215
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-06 12:23:27,113
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-06 12:23:29,293
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-06 12:23:29,312
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-07 00:23:27,119
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-07 00:23:29,766
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-07 00:23:29,793
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-07 12:23:27,123
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-07 12:23:29,814
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-07 12:23:29,834
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-08 00:23:27,126
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-08 00:23:29,748
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-08 00:23:29,768
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-08 12:23:27,133
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-08 12:23:29,709
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-08 12:23:29,733
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-09 00:23:27,133
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-09 00:23:29,870
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-09 00:23:29,893
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-09 12:23:27,146
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-09 12:23:30,202
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-09 12:23:30,232
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-10 00:23:27,153
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-10 00:23:29,740
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-10 00:23:29,761
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-10 12:23:27,157
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-10 12:23:29,899
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-10 12:23:29,925
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-11 00:23:27,173
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-11 00:23:29,914
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-11 00:23:29,933
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-11 12:23:27,171
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-11 12:23:29,685
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-11 12:23:29,703
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-12 00:23:27,207
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-12 00:23:30,074
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-12 00:23:30,094
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-12 12:23:27,212
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-12 12:23:31,275
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-12 12:23:31,295
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-13 00:23:27,214
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-13 00:23:30,022
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-13 00:23:30,041
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-13 12:23:27,223
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-13 12:23:29,975
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-13 12:23:29,994
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-14 00:23:27,230
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-14 00:23:30,281
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-14 00:23:30,302
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-14 12:23:27,233
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-14 12:23:29,592
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-14 12:23:29,615
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-15 00:23:27,244
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-15 00:23:30,036
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-15 00:23:30,057
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-15 12:23:27,254
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-15 12:23:29,988
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-15 12:23:30,008
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-16 00:23:27,260
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-16 00:23:30,081
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-16 00:23:30,106
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-16 12:23:27,262
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-16 12:23:29,743
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-16 12:23:29,762
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-17 00:23:27,265
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-17 00:23:30,254
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-17 00:23:30,275
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-17 12:23:27,265
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-17 12:23:29,891
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-17 12:23:29,913
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-18 00:23:27,269
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-18 00:23:29,904
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-18 00:23:29,924
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-18 12:23:27,277
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-18 12:23:30,118
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-18 12:23:30,140
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-19 00:23:27,278
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-19 00:23:30,599
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-19 00:23:30,623
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-19 12:23:27,278
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-19 12:23:30,023
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-19 12:23:30,042
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-20 00:23:27,279
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-20 00:23:29,946
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-20 00:23:29,981
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-20 12:23:27,280
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-20 12:23:30,068
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-20 12:23:30,088
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-21 00:23:27,292
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-21 00:23:31,295
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-21 00:23:31,314
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-21 12:23:27,285
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-21 12:23:30,216
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-21 12:23:30,237
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-22 00:23:27,288
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-22 00:23:30,007
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-22 00:23:30,028
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-22 12:23:27,293
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-22 12:23:30,077
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-22 12:23:30,096
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-23 00:23:27,296
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-23 00:23:30,018
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-23 00:23:30,038
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-23 12:23:27,301
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-23 12:23:30,325
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-23 12:23:30,345
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-24 00:23:27,305
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-24 00:23:30,049
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-24 00:23:30,068
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-24 12:23:27,334
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-24 12:23:30,182
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-24 12:23:30,207
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-25 00:23:27,336
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-25 00:23:30,434
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-25 00:23:30,456
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-25 12:23:27,339
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-25 12:23:30,426
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-25 12:23:30,448
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-26 00:23:27,342
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-26 00:23:29,973
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-26 00:23:29,996
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-26 12:23:27,347
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-26 12:23:30,174
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-26 12:23:30,193
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-27 00:23:27,362
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-27 00:23:30,387
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-27 00:23:30,406
Latest firmware 2.6.3.736 already exists

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-27 12:23:27,364
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-27 12:23:30,265
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-27 12:23:30,284
Latest firmware 2.6.3.736 already exists

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-04-28 00:21:35,195
{"methods": [], "reason": null, "uuid": "f862d912-94da-4a5b-a857-76b474f9a688", "cancelled": false, "step": "running", "complete": false, "cancellable": true, "progress": 0, "error": null, "username": null, "id": 1, "name": "FirmwareBurningProcess"}

machine_manager.py:1070: INFO
kaiten.machine_manager.MachineManager:register_process
1970-04-28 00:21:35,219
Registering new process {'methods': [], 'reason': None, 'uuid': 'f862d912-94da-4a5b-a857-76b474f9a688', 'cancelled': False, 'step': 'running', 'complete': False, 'cancellable': True, 'progress': 0, 'error': None, 'username': None, 'id': 1, 'name': 'FirmwareBurningProcess'}

firmwareburningprocess.py:109: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_open_firmware_file
1970-04-28 00:21:35,570
opening manifest.json

firmwareburningprocess.py:109: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_open_firmware_file
1970-04-28 00:21:35,906
opening rootfs

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-04-28 00:23:27,659
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-28 00:24:05,191
got latest firmware 2.6.3.736, current 2.6.2.734, returning {'release_notes': '- Security Improvements', 'version': '2.6.3.736', 'filename': 'firmware_replicator_release_2_6_3_736_11.zip', 'release_date': '05.18.2023', 'update_available': True}

firmwareupdates.py:274: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-04-28 00:24:05,210
Latest firmware 2.6.3.736 already exists

firmwareburningprocess.py:109: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_open_firmware_file
1970-04-28 00:25:06,684
opening uImage

firmwareburningprocess.py:109: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_open_firmware_file
1970-04-28 00:25:13,979
opening signature

firmwareburningprocess.py:388: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_verify_firmware
1970-04-28 00:25:16,371
Firmware passed signature check

firmwareburningprocess.py:428: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_do_run
1970-04-28 00:25:16,445
Beginning non-blocking firmware write

machine_manager.py:370: INFO
kaiten.machine_manager.MachineManager:disable_toolhead_spi
1970-04-28 00:25:16,478
Disabling machine driver

firmwareburningprocess.py:259: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_burn_firmware_birdwing
1970-04-28 00:25:17,009
Burning firmware

firmwareburningprocess.py:109: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_open_firmware_file
1970-04-28 00:25:18,972
opening rootfs

firmwareburningprocess.py:297: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_burn_firmware_birdwing
1970-04-28 00:30:29,276
Output from kernel protect:
Protected -1216462848 bytes, finished


firmwareburningprocess.py:109: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_open_firmware_file
1970-04-28 00:30:29,537
opening uImage

firmwareburningprocess.py:330: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_burn_firmware_birdwing
1970-04-28 00:31:52,075
Output from kernel burn:
Wrote 37888 bytes
Wrote 110336 bytes
Wrote 183808 bytes
Wrote 258560 bytes
Wrote 327680 bytes
Wrote 393216 bytes
Wrote 458752 bytes
Wrote 525824 bytes
Wrote 598528 bytes
Wrote 669696 bytes
Wrote 742144 bytes
Wrote 812800 bytes
Wrote 884480 bytes
Wrote 958208 bytes
Wrote 1033984 bytes
Wrote 1105408 bytes
Wrote 1179648 bytes
Wrote 1245184 bytes
Wrote 1310720 bytes
Wrote 1376256 bytes
Wrote 1441792 bytes
Wrote 1511936 bytes
Wrote 1585664 bytes
Wrote 1659136 bytes
Wrote 1733376 bytes
Wrote 1797888 bytes
Wrote 1867776 bytes
Wrote 1917440 bytes
Wrote 1982208 bytes
Wrote 2053888 bytes
Wrote 2120192 bytes
Wrote 2190848 bytes
Wrote 2262016 bytes
Wrote 2331648 bytes
Wrote 2400768 bytes
Wrote 2473728 bytes
Wrote 2546176 bytes
Wrote 2618112 bytes
Wrote 2686976 bytes
Wrote 2752512 bytes
Wrote 2818048 bytes
Wrote 2919848 bytes, finished


machine_manager.py:378: INFO
kaiten.machine_manager.MachineManager:disable_toolhead_spi
1970-04-28 00:31:56,435
Reenabled machine driver

firmwareburningprocess.py:421: INFO
kaiten.processes.firmwareburningprocess.FirmwareBurningProcess:_shutdown
1970-04-28 00:31:57,089
Shutting down

server.py:675: INFO
kaiten.server.Server:stop
1970-04-28 00:32:16,972
Stopping kaiten server (caught signal 15)

server.py:765: INFO
kaiten.server.Server:run
1970-04-28 00:32:17,068
Server stopped

bwcamera.py:394: WARNING
kaiten.bwcamera.Camera:_cleanup
1970-04-28 00:32:17,577
stop_stream failed
Traceback (most recent call last):
  File "/usr/lib/python3.4/site-packages/kaiten/bwcamera.py", line 392, in _cleanup
    self._dev.stop_stream()
RuntimeError: Device not available
main.py:29: INFO
kaiten.main:log_startup
1970-01-01 00:01:18,623
kaiten 1.9.0 started

main.py:30: INFO
kaiten.main:log_startup
1970-01-01 00:01:18,741
process id: 639

main.py:31: INFO
kaiten.main:log_startup
1970-01-01 00:01:18,801
python version: '3.4.3 (default, Nov 22 2016, 17:44:19) \n[GCC 4.8.1 20130401 (prerelease)]'

server.py:80: INFO
kaiten.server.Server:__init__
1970-01-01 00:01:19,740
Kaiten starting with firmware version 2.6.3.736

machine_manager.py:99: INFO
kaiten.machine_manager.MachineManager:__init__
1970-01-01 00:01:20,146
count: 1

machine_manager.py:101: INFO
kaiten.machine_manager.MachineManager:__init__
1970-01-01 00:01:20,181
Initialized configured tools to [<mbcoreutils.tool_mappings.Tool object at 0xb62f90b0>]

machine_manager.py:438: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:22,528
Updating settings for [<mbcoreutils.tool_mappings.Tool object at 0xb62f90b0>]

machine_manager.py:449: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:22,561
Generating settings for tool mk13

machine_manager.py:467: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:22,625
Generated config {'nozzle_diameter': 0.40000000000000002, 'max_speed_mm_per_second': {'a': 8.0}, 'materials': {'pla': {'linear_density': 0.0030999999999999999, 'retract_rate': 50, 'retract_distance': 0.5, 'toolheads': {'bronx': {'heater': {'print_temperature_default': 215, 'sag_temperature_threshold': 20, 'rise_timeout_min': 1, 'overrun_temperature_threshold': 20, 'at_temp_timeout_min': 3, 'fan_preload': 15, 'rise_temperature_threshold': 10, 'preload_tick_delay': 8900, 'wait_for_target_timeout': 5, 'preheat_temperature': 180}}}, 'temperature': 215, 'restart_rate': 30, 'acceleration': {'extruder_relax_decay_time': 300, 'impulse_speed_limit_mm_per_s': {'a': 3.0}, 'max_speed_change_mm_per_s': {'a': 0.5}, 'rate_mm_per_s_sq': {'a': 10.0}, 'motor_damping_rshift': 4, 'velocity_error_lshift': 2, 'extruder_relax_shift_offset': 1, 'extruder_responsiveness_rshift': 7, 'min_speed_change_mm_per_s': {'a': 0.01}, 'slip_compensation_table': [[0, 0], [0.48770000000000002, 0.52149999999999996], [0.73150000000000004, 0.78159999999999996], [0.97540000000000004, 1.042], [1.4631000000000001, 1.5563], [1.9508000000000001, 2.0581], [2.4384999999999999, 2.5665], [2.9260999999999999, 3.0358999999999998], [3.4138000000000002, 3.3925000000000001], [3.9015, 3.7065000000000001], [4.3891999999999998, 3.9777], [4.8769999999999998, 4.2672999999999996], [5.3646000000000003, 4.8449], [6.8277000000000001, 6.8277000000000001], [7.8030999999999997, 8.5833999999999993], [8.7783999999999995, 10.0952], [100, 100]]}, 'feed_diameter': 1.77, 'ooze_feedstock_distance': 0.10000000000000001, 'max_flow_rate': 5.0}}, 'material_default': 'pla', 'home': {'retract_distance_mm': 40.0, 'restart_distance_mm': 40.0}, 'filament': {'unload_distance_two': 50, 'load_speed': 6, 'unload_delay': 10, 'unload_distance_one': 40, 'load_distance': 100, 'unload_speed_two': 10, 'unload_speed_one': 95, 'auto_unload_distance': 80}, 'steps_per_mm': {'a': 108.55}}

machine_manager.py:473: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:22,665
Updating settings for material pla

machine_manager.py:282: INFO
kaiten.machine_manager.MachineManager:create_pymachine
1970-01-01 00:01:26,324
libmachine initialized from config

server.py:163: INFO
kaiten.server.Server:__init__
1970-01-01 00:01:26,496
Listening to usb descriptor at address /dev/g_3dprinter

bwcamera.py:253: INFO
kaiten.bwcamera.CameraContract:__next__
1970-01-01 00:01:27,287
Started camera stream

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-01 00:01:28,353
{"methods": [], "step": "running", "reason": null, "cancellable": false, "uuid": "3b07dadb-a55e-4535-bfc2-e4d384e85577", "error": null, "cancelled": false, "complete": false, "username": null, "id": 1, "name": "FirmwareCleanupProcess"}

machine_manager.py:1070: INFO
kaiten.machine_manager.MachineManager:register_process
1970-01-01 00:01:28,394
Registering new process {'methods': [], 'step': 'running', 'reason': None, 'cancellable': False, 'uuid': '3b07dadb-a55e-4535-bfc2-e4d384e85577', 'error': None, 'cancelled': False, 'complete': False, 'username': None, 'id': 1, 'name': 'FirmwareCleanupProcess'}

server.py:760: INFO
kaiten.server.Server:run
1970-01-01 00:01:28,476
Running Server

dbus.py:1073: INFO
kaiten.dbus.DBusManager:_init_wifi
1970-01-01 00:01:30,753
DBus wifi initialized

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:30,851
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:30,874
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:32,191
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:32,215
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:34,194
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:34,218
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:36,189
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:36,222
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:38,207
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:38,240
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:40,222
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:40,245
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

firmwarecleanupprocess.py:42: INFO
kaiten.processes.firmwarecleanupprocess.FirmwareCleanupProcess:_program_toolheads
1970-01-01 00:01:41,080
Programming toolheads

firmwarecleanupprocess.py:50: INFO
kaiten.processes.firmwarecleanupprocess.FirmwareCleanupProcess:_program_toolheads
1970-01-01 00:01:41,163
Programming bronx at 0 from /usr/firmware/Bronx.hex

bronxuploadprocess.py:47: INFO
kaiten.processes.bronxuploadprocess.BronxUploadProcess:_do_run
1970-01-01 00:01:52,456
Toolhead 0 programmed on try 0

bronxuploadprocess.py:59: INFO
kaiten.processes.bronxuploadprocess.BronxUploadProcess:_do_run
1970-01-01 00:01:52,478
Toolhead 0 firmware upload complete

profiler.py:112: WARNING
kaiten.profiler.Profiler:tick
1970-01-01 00:01:52,536
Unusually long generator FirmwareCleanupProcess lasted 0:00:10.569925

fontdownload.py:109: INFO
kaiten.fontdownload.FontDownload:__next__
1970-01-01 00:01:53,238
Font download complete

scheduler.py:368: ERROR
kaiten.scheduler.ContractGeneratorManager:run
1970-01-01 00:01:53,262
Evicting FontDownload due to unhandled exception
Traceback (most recent call last):
  File "/usr/lib/python3.4/site-packages/kaiten/scheduler.py", line 362, in run
    next(contract.generator)
  File "/usr/lib/python3.4/site-packages/kaiten/fontdownload.py", line 111, in __next__
    {'available_languages': FontDownload.ui_cjk_langs})
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 989, in notify_client
    client = self._get_client(client)
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 975, in _get_client
    raise Exception(getattr(client, 'name', client) + ' not connected')
Exception: lcd not connected
dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:53,956
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:53,991
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

profiler.py:112: WARNING
kaiten.profiler.Profiler:tick
1970-01-01 00:01:57,209
Unusually long generator FirmwareCleanupProcess lasted 0:00:03.123725

profiler.py:112: WARNING
kaiten.profiler.Profiler:tick
1970-01-01 00:02:00,764
Unusually long generator FirmwareCleanupProcess lasted 0:00:03.513504

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:03,697
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:03,731
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:07,598
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:07,641
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

firmwarecleanupprocess.py:38: INFO
kaiten.processes.firmwarecleanupprocess.FirmwareCleanupProcess:_verify_software
1970-01-01 00:02:07,746
Verifying software

machine_manager.py:1040: INFO
kaiten.machine_manager.MachineManager:_iterate_process
1970-01-01 00:02:07,947
Process Finished: {'methods': [], 'step': 'done', 'reason': None, 'cancellable': False, 'uuid': '3b07dadb-a55e-4535-bfc2-e4d384e85577', 'error': None, 'cancelled': False, 'complete': True, 'username': None, 'id': 1, 'name': 'FirmwareCleanupProcess'}

machine_manager.py:1091: INFO
kaiten.machine_manager.MachineManager:_evict_process
1970-01-01 00:02:08,025
Evicting process {'methods': [], 'step': 'done', 'reason': None, 'cancellable': False, 'uuid': '3b07dadb-a55e-4535-bfc2-e4d384e85577', 'error': None, 'cancelled': False, 'complete': True, 'username': None, 'id': 1, 'name': 'FirmwareCleanupProcess'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:09,618
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:09,652
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:11,616
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:11,639
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:13,631
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:13,655
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:15,627
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:15,660
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:17,629
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:17,662
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:19,889
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:19,922
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:21,971
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:21,995
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:23,949
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:23,984
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:25,988
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:26,022
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:28,018
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:28,060
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:30,029
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:30,053
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:32,052
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:32,076
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:34,072
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:34,095
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

machine_manager.py:2222: INFO
kaiten.machine_manager.MachineManager:resume_boot
1970-01-01 00:02:34,867
Resuming boot sequence

machine_manager.py:1198: INFO
kaiten.machine_manager.MachineManager:get_tool_usage_stats
1970-01-01 00:02:35,354
Finding stats {'extrusion_time_s': 477374, 'serial': 82994, 'retract_count': 3908090788, 'refurb_count': 0, 'extrusion_distance_mm': 99164739}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:36,274
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:36,307
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:38,279
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:38,343
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:40,299
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:40,354
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:45,554
Queried dbus network state

dbus.py:977: INFO
kaiten.dbus.DBusManager:_initialize_bus
1970-01-01 00:02:46,457
DBus initialized

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:46,633
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:02:46,689
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1047: INFO
kaiten.dbus.DBusManager:_initialize_discovery
1970-01-01 00:02:47,370
Bringing up MDNS/SD discovery advertising...

dbus.py:1059: INFO
kaiten.dbus.DBusManager:_initialize_discovery
1970-01-01 00:02:48,775
mDNS/SD discovery online as Makerbot-02A6AF

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-01 00:02:50,905
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-01 00:02:50,987
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:51,918
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:02:51,958
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-01 00:02:52,011
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-01 00:02:56,005
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

server.py:97: INFO
kaiten.server.Server:reload_config
1970-01-01 00:03:32,787
Kaiten reloading config

machine_manager.py:438: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:03:32,834
Updating settings for [<mbcoreutils.tool_mappings.Tool object at 0xb62f90b0>]

machine_manager.py:449: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:03:32,857
Generating settings for tool mk13

machine_manager.py:467: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:03:32,932
Generated config {'nozzle_diameter': 0.40000000000000002, 'max_speed_mm_per_second': {'a': 8.0}, 'materials': {'pla': {'linear_density': 0.0030999999999999999, 'retract_rate': 50, 'retract_distance': 0.5, 'toolheads': {'bronx': {'heater': {'print_temperature_default': 215, 'sag_temperature_threshold': 20, 'rise_timeout_min': 1, 'overrun_temperature_threshold': 20, 'at_temp_timeout_min': 3, 'fan_preload': 15, 'rise_temperature_threshold': 10, 'preload_tick_delay': 8900, 'wait_for_target_timeout': 5, 'preheat_temperature': 180}}}, 'temperature': 215, 'restart_rate': 30, 'acceleration': {'extruder_relax_decay_time': 300, 'impulse_speed_limit_mm_per_s': {'a': 3.0}, 'max_speed_change_mm_per_s': {'a': 0.5}, 'rate_mm_per_s_sq': {'a': 10.0}, 'motor_damping_rshift': 4, 'velocity_error_lshift': 2, 'extruder_relax_shift_offset': 1, 'extruder_responsiveness_rshift': 7, 'min_speed_change_mm_per_s': {'a': 0.01}, 'slip_compensation_table': [[0, 0], [0.48770000000000002, 0.52149999999999996], [0.73150000000000004, 0.78159999999999996], [0.97540000000000004, 1.042], [1.4631000000000001, 1.5563], [1.9508000000000001, 2.0581], [2.4384999999999999, 2.5665], [2.9260999999999999, 3.0358999999999998], [3.4138000000000002, 3.3925000000000001], [3.9015, 3.7065000000000001], [4.3891999999999998, 3.9777], [4.8769999999999998, 4.2672999999999996], [5.3646000000000003, 4.8449], [6.8277000000000001, 6.8277000000000001], [7.8030999999999997, 8.5833999999999993], [8.7783999999999995, 10.0952], [100, 100]]}, 'feed_diameter': 1.77, 'ooze_feedstock_distance': 0.10000000000000001, 'max_flow_rate': 5.0}}, 'material_default': 'pla', 'home': {'retract_distance_mm': 40.0, 'restart_distance_mm': 40.0}, 'filament': {'unload_distance_two': 50, 'load_speed': 6, 'unload_delay': 10, 'unload_distance_one': 40, 'load_distance': 100, 'unload_speed_two': 10, 'unload_speed_one': 95, 'auto_unload_distance': 80}, 'steps_per_mm': {'a': 108.55}}

machine_manager.py:473: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:03:32,982
Updating settings for material pla

reflector.py:134: INFO
kaiten.reflector.Reflector:_update_reflector_machine_config
1970-01-01 00:03:33,026
REFLECTOR - update machine config

machine_manager.py:2485: INFO
kaiten.machine_manager.MachineManager:fill_config_skeleton
1970-01-01 00:03:33,090
override key chamber_temperature_default erased

server.py:1416: INFO
kaiten.server.Server:authenticate
1970-01-01 00:03:34,619
Accepted authentication for connection

profiler.py:112: WARNING
kaiten.profiler.Profiler:tick
1970-01-01 00:03:34,665
Unusually long generator tcp (b'') lasted 0:00:02.745405

server.py:1416: INFO
kaiten.server.Server:authenticate
1970-01-01 00:03:35,907
Accepted authentication for connection

server.py:1503: INFO
kaiten.server.Server:register_fcgi
1970-01-01 00:03:37,258
Registered fcgi

machine_manager.py:2485: INFO
kaiten.machine_manager.MachineManager:fill_config_skeleton
1970-01-01 00:03:37,378
override key chamber_temperature_default erased

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-01 00:14:00,378
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-01 00:14:02,189
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-01 00:27:43,345
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-01 00:27:45,193
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

server.py:1416: INFO
kaiten.server.Server:authenticate
1970-01-01 01:40:55,933
Accepted authentication for connection

server.py:1416: INFO
kaiten.server.Server:authenticate
1970-01-01 01:40:56,533
Accepted authentication for connection

machine_manager.py:1198: INFO
kaiten.machine_manager.MachineManager:get_tool_usage_stats
1970-01-01 01:40:56,804
Finding stats {'extrusion_time_s': 477374, 'serial': 82994, 'retract_count': 3908090788, 'refurb_count': 0, 'extrusion_distance_mm': 99164739}

machine_manager.py:2485: INFO
kaiten.machine_manager.MachineManager:fill_config_skeleton
1970-01-01 01:40:56,939
override key chamber_temperature_default erased

server.py:1416: INFO
kaiten.server.Server:authenticate
1970-01-01 02:30:37,909
Accepted authentication for connection

server.py:1416: INFO
kaiten.server.Server:authenticate
1970-01-01 02:30:38,481
Accepted authentication for connection

machine_manager.py:1198: INFO
kaiten.machine_manager.MachineManager:get_tool_usage_stats
1970-01-01 02:30:38,783
Finding stats {'extrusion_time_s': 477374, 'serial': 82994, 'retract_count': 3908090788, 'refurb_count': 0, 'extrusion_distance_mm': 99164739}

machine_manager.py:2485: INFO
kaiten.machine_manager.MachineManager:fill_config_skeleton
1970-01-01 02:30:38,872
override key chamber_temperature_default erased

server.py:1416: INFO
kaiten.server.Server:authenticate
1970-01-01 02:30:52,574
Accepted authentication for connection

server.py:1416: INFO
kaiten.server.Server:authenticate
1970-01-01 02:30:53,292
Accepted authentication for connection

machine_manager.py:1198: INFO
kaiten.machine_manager.MachineManager:get_tool_usage_stats
1970-01-01 02:30:53,636
Finding stats {'extrusion_time_s': 477374, 'serial': 82994, 'retract_count': 3908090788, 'refurb_count': 0, 'extrusion_distance_mm': 99164739}

machine_manager.py:2485: INFO
kaiten.machine_manager.MachineManager:fill_config_skeleton
1970-01-01 02:30:53,843
override key chamber_temperature_default erased

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-01 12:02:51,988
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-01 12:02:53,593
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

machine_manager.py:1499: INFO
kaiten.machine_manager.MachineManager:_print
1970-01-01 21:37:35,835
Cant find file /home/usb_storage/makerbot/test file.makerbot

jsonrpc.py:617: WARNING
kaiten.jsonrpc.JsonRpc:_handle_request
1970-01-01 21:37:35,870
uncaught exception
Traceback (most recent call last):
  File "/usr/lib/python3.4/site-packages/kaiten/jsonrpc.py", line 609, in _handle_request
    result = yield from self._invoke_method(func, args, kwargs)
  File "/usr/lib/python3.4/site-packages/kaiten/jsonrpc.py", line 699, in _invoke_method
    result = func(*args, **kwargs)
  File "/usr/lib/python3.4/site-packages/kaiten/decorator.py", line 174, in decorator
    process = func(self, *args, **kwargs)
  File "/usr/lib/python3.4/site-packages/kaiten/machine_manager.py", line 1379, in print
    transfer_wait=transfer_wait)
  File "/usr/lib/python3.4/site-packages/kaiten/machine_manager.py", line 1500, in _print
    raise FileNotFoundError
FileNotFoundError
decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-01 21:37:55,344
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 3, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "36652ac6-dc4a-41f0-b3df-0a6a1737d0d6", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/var/home/things/test file.makerbot"}

machine_manager.py:1070: INFO
kaiten.machine_manager.MachineManager:register_process
1970-01-01 21:37:55,376
Registering new process {'reason': None, 'thing_id': None, 'cancelled': False, 'elapsed_time': 0, 'start_time': None, 'step': 'initializing', 'cancellable': True, 'progress': 0, 'can_print_again': False, 'error': None, 'username': 'printerpanel', 'id': 3, 'name': 'PrintProcess', 'methods': [], 'filepath': None, 'uuid': '36652ac6-dc4a-41f0-b3df-0a6a1737d0d6', 'print_temperatures': {}, 'filament_extruded': 0, 'complete': False, 'filename': '/var/home/things/test file.makerbot'}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-01-01 21:38:02,409
Beginning print of /home/current_thing/test file.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-01 21:38:02,481
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:02,594
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:02,875
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:03,037
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-01 21:38:03,156
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-01 21:38:03,240
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-01 21:38:04,334
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-01 21:38:11,596
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-01 21:38:13,009
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:27,769
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-01 21:38:56,614
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:56,690
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:56,743
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:56,855
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 21:38:57,115
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 21:38:57,250
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': '1fc9e675-3447-407c-80dc-ba361f5fcddc', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 1369547, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [6.8037619590759277], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [2229.928955078125], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 5697.9501953125, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 21:38:57,309
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 21:38:57,484
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'preferences/overrides/modelFillProfiles.sparse.pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'preferences/overrides/layerHeight': 0.10000000000000001, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/sparse/density': 0.29999999999999999, 'gaggles/default/layerHeight': 0.10000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/yScale': 1, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\admin\\AppData\\Local\\Temp\\tmp-38164R0WZvCOQ8IZB\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'preferences/overrides/modelFillProfiles.sparse.density': 0.29999999999999999, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:57,804
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:57,904
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:58,011
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:38:58,103
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:41:09,014
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:41:09,120
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 21:41:09,206
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-01 21:41:10,722
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 21:41:18,559
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 21:41:18,595
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 21:41:18,616
Beginning JT parse

machine_manager.py:887: INFO
kaiten.machine_manager.MachineManager:_eval_toolhead_error_code
1970-01-01 21:45:44,516
Set last toolhead error to 80

machine_manager.py:735: ERROR
kaiten.machine_manager.MachineManager:_handle_error
1970-01-01 21:45:44,535
Handling error: 80, severity: warning

printprocess.py:1400: INFO
kaiten.processes.printprocess.PrintProcess:handle_error
1970-01-01 21:45:45,999
in handle_error of printprocess - {'code': 80, 'source': {'type': 'extruder', 'index': 0}, 'error_id': 0}, step printing

printprocess.py:1521: INFO
kaiten.processes.printprocess.PrintProcess:_do_suspend
1970-01-01 21:45:46,625
Suspended at command index: 1100

machine_manager.py:2241: INFO
kaiten.machine_manager.MachineManager:acknowledged
1970-01-01 21:45:47,409
Acknowledging error state in kaiten (error id 0)

printprocess.py:1546: INFO
kaiten.processes.printprocess.PrintProcess:_do_suspend
1970-01-01 21:45:48,089
Suspended with index, position [9.280461311340332, 18.210929870605469, 0.82999998331069946, 128599.15625]

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-01 21:46:30,542
Process method invoked: unload_filament

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-01 21:47:01,359
Process method invoked: load_filament

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-01 21:48:53,320
Process method invoked: resume

printprocess.py:1762: INFO
kaiten.processes.printprocess.PrintProcess:resume
1970-01-01 21:48:53,343
Unsuspending process

printprocess.py:1602: INFO
kaiten.processes.printprocess.PrintProcess:_do_unsuspend
1970-01-01 21:48:54,675
Awaiting toolhead sync confirmation...

printprocess.py:1608: INFO
kaiten.processes.printprocess.PrintProcess:_do_unsuspend
1970-01-01 21:48:54,720
Got toolhead sync confirmation after 0 cycles

printprocess.py:1629: INFO
kaiten.processes.printprocess.PrintProcess:_do_unsuspend
1970-01-01 21:48:54,802
Queued move to toolpath

printprocess.py:1631: INFO
kaiten.processes.printprocess.PrintProcess:_do_unsuspend
1970-01-01 21:48:54,825
loaded filament, not restoring it

printprocess.py:1672: INFO
kaiten.processes.printprocess.PrintProcess:_do_unsuspend
1970-01-01 21:48:55,085
Spooling parser...

printprocess.py:1679: INFO
kaiten.processes.printprocess.PrintProcess:_do_unsuspend
1970-01-01 21:48:56,250
Parser spooled, continuing

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 22:30:01,047
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 22:30:01,136
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-01 22:30:36,316
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 22:30:36,415
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 22:30:37,036
EEPROM transaction done after 0 seconds (9 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 22:30:37,048
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-01 22:30:38,058
In terminal hold step, errors ignored

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-02 00:02:52,039
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-02 00:02:54,407
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-02 00:05:41,088
Process method invoked: acknowledge_completed

machine_manager.py:1040: INFO
kaiten.machine_manager.MachineManager:_iterate_process
1970-01-02 00:05:41,240
Process Finished: {'reason': None, 'thing_id': 0, 'cancelled': False, 'elapsed_time': 2761, 'start_time': None, 'step': 'done', 'cancellable': True, 'progress': 100, 'can_print_again': True, 'error': None, 'username': 'printerpanel', 'id': 3, 'name': 'PrintProcess', 'methods': [], 'filepath': '/home/current_thing/test file.makerbot', 'uuid': '36652ac6-dc4a-41f0-b3df-0a6a1737d0d6', 'print_temperatures': {0: 215}, 'filament_extruded': 6, 'time_remaining': 2936, 'complete': True, 'extrusion_mass_g': [6.8037619590759277], 'extrusion_distance_mm': [2229.928955078125], 'filename': '/var/home/things/test file.makerbot', 'time_estimation': 5697.9501953125}

machine_manager.py:1091: INFO
kaiten.machine_manager.MachineManager:_evict_process
1970-01-02 00:05:41,338
Evicting process {'reason': None, 'thing_id': 0, 'cancelled': False, 'elapsed_time': 2761, 'start_time': None, 'step': 'done', 'cancellable': True, 'progress': 100, 'can_print_again': True, 'error': None, 'username': 'printerpanel', 'id': 3, 'name': 'PrintProcess', 'methods': [], 'filepath': '/home/current_thing/test file.makerbot', 'uuid': '36652ac6-dc4a-41f0-b3df-0a6a1737d0d6', 'print_temperatures': {0: 215}, 'filament_extruded': 6, 'time_remaining': 2936, 'complete': True, 'extrusion_mass_g': [6.8037619590759277], 'extrusion_distance_mm': [2229.928955078125], 'filename': '/var/home/things/test file.makerbot', 'time_estimation': 5697.9501953125}

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-02 00:06:14,382
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 4, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "ee718ec6-87ff-4f30-a296-289dbbafeb0b", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud559\uacfc\ud0d0\ubc29/\ucf54\uc778/2-1.makerbot"}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-01-02 00:06:25,936
Beginning print of /home/current_thing/2-1.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-02 00:06:26,016
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:06:26,062
Sequence: load_temperature_settings(([180],), {})

machine_manager.py:1109: INFO
kaiten.machine_manager.MachineManager:_cancel_process
1970-01-02 00:06:26,191
Cancelling process {"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": true, "error": null, "username": "printerpanel", "id": 4, "name": "PrintProcess", "methods": [], "filepath": "/home/current_thing/2-1.makerbot", "uuid": "ee718ec6-87ff-4f30-a296-289dbbafeb0b", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud559\uacfc\ud0d0\ubc29/\ucf54\uc778/2-1.makerbot"}

printprocess.py:942: INFO
kaiten.processes.printprocess.PrintProcess:cancel
1970-01-02 00:06:26,240
normal cancel

printprocess.py:1130: INFO
kaiten.processes.printprocess.PrintProcess:_do_cancel
1970-01-02 00:06:27,881
Start sequence never finished, not mopving

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-02 00:06:28,355
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-02 00:06:28,488
EEPROM transaction begins after 0 seconds (0 iterations)

jsonrpc.py:617: WARNING
kaiten.jsonrpc.JsonRpc:_handle_request
1970-01-02 00:06:28,663
uncaught exception
Traceback (most recent call last):
  File "/usr/lib/python3.4/site-packages/kaiten/jsonrpc.py", line 609, in _handle_request
    result = yield from self._invoke_method(func, args, kwargs)
  File "/usr/lib/python3.4/site-packages/kaiten/jsonrpc.py", line 699, in _invoke_method
    result = func(*args, **kwargs)
  File "/usr/lib/python3.4/site-packages/kaiten/machine_manager.py", line 2186, in cancel
    self._cancel_process()
  File "/usr/lib/python3.4/site-packages/kaiten/machine_manager.py", line 1107, in _cancel_process
    raise kaiten.error.ProcessNotCancellableException
kaiten.error.ProcessNotCancellableException
activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-02 00:06:29,096
EEPROM transaction done after 0 seconds (7 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-02 00:06:29,109
EEPROM transaction yields ok

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-02 00:07:01,468
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 5, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "ff77f3e1-8e86-4214-b51c-e83025adbfe5", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud559\uacfc\ud0d0\ubc29/\ucf54\uc778/2-1.makerbot"}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-01-02 00:07:12,625
Beginning print of /home/current_thing/2-1.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-02 00:07:12,753
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:07:12,794
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:07:12,944
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:07:13,090
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-02 00:07:13,182
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-02 00:07:13,225
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-02 00:07:14,219
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-02 00:07:21,528
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-02 00:07:22,959
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:07:37,711
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-02 00:08:06,917
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:08:06,998
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:08:07,085
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:08:07,227
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 00:08:07,569
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 00:08:07,735
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': 'dd9a7495-f26a-48c9-b1a1-185f0f452f0c', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 2366981, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [45.324089050292969], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [14854.943359375], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 15551.099609375, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 00:08:07,758
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 00:08:07,970
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\admin\\AppData\\Local\\Temp\\tmp-7068VznEYtMaglWf\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:08:08,232
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:08:08,301
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:08:08,402
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:08:08,464
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:10:21,881
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:10:22,037
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 00:10:22,192
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-02 00:10:23,782
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 00:10:31,161
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 00:10:31,179
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 00:10:31,196
Beginning JT parse

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 02:38:10,570
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 02:38:10,685
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-02 02:38:33,588
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-02 02:38:33,704
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-02 02:38:34,279
EEPROM transaction done after 0 seconds (9 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-02 02:38:34,322
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-02 02:38:35,028
In terminal hold step, errors ignored

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-02 02:57:41,338
Process method invoked: acknowledge_completed

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-02 02:58:03,911
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 6, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "043fa35c-d42b-4c8e-9ebd-1960ead9de95", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud559\uacfc\ud0d0\ubc29/\ucf54\uc778/1-3.makerbot"}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-01-02 02:58:15,469
Beginning print of /home/current_thing/1-3.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-02 02:58:15,553
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:58:15,589
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:58:15,762
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:58:15,968
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-02 02:58:16,077
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-02 02:58:16,131
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-02 02:58:17,122
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-02 02:58:24,381
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-02 02:58:25,793
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:58:40,541
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-02 02:59:10,419
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:59:10,495
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:59:10,549
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:59:10,720
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 02:59:11,043
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 02:59:11,182
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': 'b3181c9a-8e12-47ec-b122-2db97da93f83', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 2396370, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [44.947231292724609], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [14731.4287109375], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 16936.900390625, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 02:59:11,219
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 02:59:11,397
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 160, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'preferences/overrides/extruderProfiles.0.retractDistance': 1, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\admin\\AppData\\Local\\Temp\\tmp-5328MjgFpEXa7eSB\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'preferences/overrides/travelSpeedXY': 160, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 1}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:59:11,652
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:59:11,715
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:59:11,813
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 02:59:11,898
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 03:01:22,779
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 03:01:22,874
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 03:01:22,948
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-02 03:01:24,393
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 03:01:32,193
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 03:01:32,217
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 03:01:32,239
Beginning JT parse

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-02 04:10:11,875
wifi technology change: Connected->0

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-02 04:10:11,904
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-02 04:10:13,278
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-02 04:10:13,324
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-02 04:10:22,736
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-02 04:10:22,759
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-02 04:10:24,444
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-02 04:10:24,488
notifying clients of network state: {'gateway': dbus.String('218.157.48.254', variant_level=1), 'tethering': False, 'ip': dbus.String('218.157.48.188', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [dbus.String('168.126.63.1'), dbus.String('168.126.63.2')], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.255.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

machine_manager.py:887: INFO
kaiten.machine_manager.MachineManager:_eval_toolhead_error_code
1970-01-02 05:27:59,795
Set last toolhead error to 80

machine_manager.py:735: ERROR
kaiten.machine_manager.MachineManager:_handle_error
1970-01-02 05:27:59,808
Handling error: 80, severity: warning

printprocess.py:1400: INFO
kaiten.processes.printprocess.PrintProcess:handle_error
1970-01-02 05:28:01,267
in handle_error of printprocess - {'code': 80, 'source': {'type': 'extruder', 'index': 0}, 'error_id': 1}, step printing

printprocess.py:1521: INFO
kaiten.processes.printprocess.PrintProcess:_do_suspend
1970-01-02 05:28:01,563
Suspended at command index: 93655

printprocess.py:1546: INFO
kaiten.processes.printprocess.PrintProcess:_do_suspend
1970-01-02 05:28:02,884
Suspended with index, position [-70.38812255859375, -31.166316986083984, 6.0699996948242188, 129806.6328125]

machine_manager.py:2241: INFO
kaiten.machine_manager.MachineManager:acknowledged
1970-01-02 05:28:02,929
Acknowledging error state in kaiten (error id 1)

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-02 12:02:52,080
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-02 12:02:53,781
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-02 20:55:20,877
Process method invoked: load_filament

machine_manager.py:1109: INFO
kaiten.machine_manager.MachineManager:_cancel_process
1970-01-02 20:59:32,840
Cancelling process {"reason": null, "thing_id": 0, "cancelled": false, "elapsed_time": 8796, "start_time": null, "step": "suspended", "cancellable": true, "progress": 96, "can_print_again": true, "error": null, "username": "printerpanel", "id": 6, "name": "PrintProcess", "methods": ["load_print_tool", "load_filament", "resume", "unload_filament"], "filepath": "/home/current_thing/1-3.makerbot", "uuid": "043fa35c-d42b-4c8e-9ebd-1960ead9de95", "print_temperatures": {"0": 215}, "filament_extruded": 43, "time_remaining": 8140, "complete": false, "extrusion_mass_g": [44.947231292724609], "extrusion_distance_mm": [14731.4287109375], "filename": "/home/usb_storage/\ud559\uacfc\ud0d0\ubc29/\ucf54\uc778/1-3.makerbot", "time_estimation": 16936.900390625}

printprocess.py:942: INFO
kaiten.processes.printprocess.PrintProcess:cancel
1970-01-02 20:59:32,913
normal cancel

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-02 20:59:45,693
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-02 20:59:45,822
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-02 20:59:46,426
EEPROM transaction done after 0 seconds (9 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-02 20:59:46,457
EEPROM transaction yields ok

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-02 21:35:29,649
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 7, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "89706774-6fa3-4008-9687-3081c0d8a444", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud559\uacfc\ud0d0\ubc29/\uba54\uc778/1.makerbot"}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-01-02 21:35:46,017
Beginning print of /home/current_thing/1.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-02 21:35:46,101
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:35:46,148
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:35:46,363
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:35:46,499
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-02 21:35:46,631
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-02 21:35:46,675
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-02 21:35:47,677
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-02 21:35:54,992
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-02 21:35:56,423
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:36:11,242
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-02 21:36:39,731
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:36:39,825
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:36:39,908
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:36:40,116
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 21:36:40,438
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 21:36:40,591
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': 'f7c26aeb-1168-45ed-ace7-012bab8a4d35', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 2191059, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [53.71441650390625], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [17604.8671875], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 16588.80078125, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 21:36:40,633
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-02 21:36:40,836
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\admin\\AppData\\Local\\Temp\\tmp-6716ZU9oDHZ2AKcb\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:36:41,123
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:36:41,193
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:36:41,286
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:36:41,353
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:38:54,795
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:38:54,875
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-02 21:38:54,977
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-02 21:38:56,562
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 21:39:04,176
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 21:39:04,191
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-02 21:39:04,205
Beginning JT parse

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-03 00:02:52,078
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-03 00:02:53,896
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-03 01:03:54,339
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-03 01:03:54,453
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-03 01:04:20,175
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-03 01:04:20,284
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-03 01:04:20,896
EEPROM transaction done after 0 seconds (8 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-03 01:04:20,919
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-03 01:04:21,573
In terminal hold step, errors ignored

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-03 01:10:15,437
Process method invoked: acknowledge_completed

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-03 01:10:44,701
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 8, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "0c74ba8a-dcc3-4306-b013-3d6bd11572c3", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud559\uacfc\ud0d0\ubc29/\uace0\ub2c8/3.makerbot"}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-01-03 01:10:48,828
Beginning print of /home/current_thing/3.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-03 01:10:48,951
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:10:48,996
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:10:49,157
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:10:49,277
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-03 01:10:49,343
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-03 01:10:49,378
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-03 01:10:50,350
using input kwargs

machine_manager.py:1109: INFO
kaiten.machine_manager.MachineManager:_cancel_process
1970-01-03 01:10:52,224
Cancelling process {"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initial_heating", "cancellable": true, "progress": 20, "can_print_again": true, "error": null, "username": "printerpanel", "id": 8, "name": "PrintProcess", "methods": [], "filepath": "/home/current_thing/3.makerbot", "uuid": "0c74ba8a-dcc3-4306-b013-3d6bd11572c3", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud559\uacfc\ud0d0\ubc29/\uace0\ub2c8/3.makerbot"}

printprocess.py:942: INFO
kaiten.processes.printprocess.PrintProcess:cancel
1970-01-03 01:10:52,274
normal cancel

printprocess.py:1130: INFO
kaiten.processes.printprocess.PrintProcess:_do_cancel
1970-01-03 01:10:54,253
Start sequence never finished, not mopving

xyhomeactivity.py:26: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_cleanup
1970-01-03 01:10:54,365
HOME: XY home cleaning up failed home for axis y

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-03 01:10:54,862
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-03 01:10:54,971
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-03 01:10:55,566
EEPROM transaction done after 0 seconds (9 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-03 01:10:55,578
EEPROM transaction yields ok

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-03 01:11:02,997
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 9, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "9156b82b-f535-4dfb-a1e8-d0dac738ae6b", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\ud559\uacfc\ud0d0\ubc29/\uace0\ub2c8/\ud604\ubbfc.makerbot"}

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-03 01:11:06,124
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:11:06,184
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:11:06,399
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:11:06,519
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-03 01:11:06,768
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-03 01:11:06,818
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-03 01:11:07,809
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-03 01:11:13,565
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-03 01:11:14,998
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:11:29,850
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-03 01:11:58,603
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:11:58,677
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:11:58,749
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:11:58,968
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-03 01:11:59,314
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-03 01:11:59,471
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': 'a6b38744-76c5-4a3d-b3a8-964761e0aa71', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 345180, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [1.8674520254135132], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [612.0562744140625], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 666.98199462890625, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-03 01:11:59,508
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-03 01:11:59,724
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\admin\\AppData\\Local\\Temp\\tmp-16292CQks60ZVUfMB\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:11:59,989
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:12:00,055
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:12:00,146
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:12:00,273
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:13:53,159
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:13:53,298
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-03 01:13:53,401
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-03 01:13:54,910
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-03 01:14:02,541
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-03 01:14:02,555
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-03 01:14:02,567
Beginning JT parse

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-03 01:20:18,926
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-03 01:20:19,011
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-03 01:20:41,916
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-03 01:20:42,022
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-03 01:20:42,650
EEPROM transaction done after 0 seconds (9 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-03 01:20:42,667
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-03 01:20:43,503
In terminal hold step, errors ignored

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-03 12:02:52,145
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-03 12:02:54,263
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-03 21:55:10,927
Process method invoked: acknowledge_completed

main.py:29: INFO
kaiten.main:log_startup
1970-01-01 00:01:24,006
kaiten 1.9.0 started

main.py:30: INFO
kaiten.main:log_startup
1970-01-01 00:01:24,121
process id: 639

main.py:31: INFO
kaiten.main:log_startup
1970-01-01 00:01:24,183
python version: '3.4.3 (default, Nov 22 2016, 17:44:19) \n[GCC 4.8.1 20130401 (prerelease)]'

server.py:80: INFO
kaiten.server.Server:__init__
1970-01-01 00:01:25,132
Kaiten starting with firmware version 2.6.3.736

machine_manager.py:99: INFO
kaiten.machine_manager.MachineManager:__init__
1970-01-01 00:01:25,583
count: 1

machine_manager.py:101: INFO
kaiten.machine_manager.MachineManager:__init__
1970-01-01 00:01:25,607
Initialized configured tools to [<mbcoreutils.tool_mappings.Tool object at 0xb62390b0>]

machine_manager.py:438: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:28,057
Updating settings for [<mbcoreutils.tool_mappings.Tool object at 0xb62390b0>]

machine_manager.py:449: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:28,090
Generating settings for tool mk13

machine_manager.py:467: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:28,153
Generated config {'nozzle_diameter': 0.40000000000000002, 'max_speed_mm_per_second': {'a': 8.0}, 'materials': {'pla': {'linear_density': 0.0030999999999999999, 'retract_rate': 50, 'retract_distance': 0.5, 'toolheads': {'bronx': {'heater': {'print_temperature_default': 215, 'sag_temperature_threshold': 20, 'rise_timeout_min': 1, 'overrun_temperature_threshold': 20, 'at_temp_timeout_min': 3, 'fan_preload': 15, 'rise_temperature_threshold': 10, 'preload_tick_delay': 8900, 'wait_for_target_timeout': 5, 'preheat_temperature': 180}}}, 'temperature': 215, 'restart_rate': 30, 'acceleration': {'extruder_relax_decay_time': 300, 'impulse_speed_limit_mm_per_s': {'a': 3.0}, 'max_speed_change_mm_per_s': {'a': 0.5}, 'rate_mm_per_s_sq': {'a': 10.0}, 'motor_damping_rshift': 4, 'velocity_error_lshift': 2, 'extruder_relax_shift_offset': 1, 'extruder_responsiveness_rshift': 7, 'min_speed_change_mm_per_s': {'a': 0.01}, 'slip_compensation_table': [[0, 0], [0.48770000000000002, 0.52149999999999996], [0.73150000000000004, 0.78159999999999996], [0.97540000000000004, 1.042], [1.4631000000000001, 1.5563], [1.9508000000000001, 2.0581], [2.4384999999999999, 2.5665], [2.9260999999999999, 3.0358999999999998], [3.4138000000000002, 3.3925000000000001], [3.9015, 3.7065000000000001], [4.3891999999999998, 3.9777], [4.8769999999999998, 4.2672999999999996], [5.3646000000000003, 4.8449], [6.8277000000000001, 6.8277000000000001], [7.8030999999999997, 8.5833999999999993], [8.7783999999999995, 10.0952], [100, 100]]}, 'feed_diameter': 1.77, 'ooze_feedstock_distance': 0.10000000000000001, 'max_flow_rate': 5.0}}, 'material_default': 'pla', 'home': {'retract_distance_mm': 40.0, 'restart_distance_mm': 40.0}, 'filament': {'unload_distance_two': 50, 'load_speed': 6, 'unload_delay': 10, 'unload_distance_one': 40, 'load_distance': 100, 'unload_speed_two': 10, 'unload_speed_one': 95, 'auto_unload_distance': 80}, 'steps_per_mm': {'a': 108.55}}

machine_manager.py:473: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:28,193
Updating settings for material pla

machine_manager.py:282: INFO
kaiten.machine_manager.MachineManager:create_pymachine
1970-01-01 00:01:31,837
libmachine initialized from config

server.py:163: INFO
kaiten.server.Server:__init__
1970-01-01 00:01:32,017
Listening to usb descriptor at address /dev/g_3dprinter

bwcamera.py:253: INFO
kaiten.bwcamera.CameraContract:__next__
1970-01-01 00:01:32,857
Started camera stream

server.py:760: INFO
kaiten.server.Server:run
1970-01-01 00:01:33,783
Running Server

dbus.py:1073: INFO
kaiten.dbus.DBusManager:_init_wifi
1970-01-01 00:01:36,171
DBus wifi initialized

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:36,280
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:36,304
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:37,587
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:37,621
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:39,589
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:39,623
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:41,596
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:41,630
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:43,606
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:43,641
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:45,631
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:45,655
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:47,649
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:47,683
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:49,657
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:49,690
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:51,665
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:51,689
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:53,673
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:53,697
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

fontdownload.py:109: INFO
kaiten.fontdownload.FontDownload:__next__
1970-01-01 00:01:53,801
Font download complete

scheduler.py:368: ERROR
kaiten.scheduler.ContractGeneratorManager:run
1970-01-01 00:01:53,821
Evicting FontDownload due to unhandled exception
Traceback (most recent call last):
  File "/usr/lib/python3.4/site-packages/kaiten/scheduler.py", line 362, in run
    next(contract.generator)
  File "/usr/lib/python3.4/site-packages/kaiten/fontdownload.py", line 111, in __next__
    {'available_languages': FontDownload.ui_cjk_langs})
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 989, in notify_client
    client = self._get_client(client)
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 975, in _get_client
    raise Exception(getattr(client, 'name', client) + ' not connected')
Exception: lcd not connected
dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:55,702
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:55,725
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:57,715
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:57,750
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:59,716
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:59,739
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:01,728
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:01,762
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:03,793
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:03,817
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:05,786
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:05,821
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:07,799
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:07,834
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:09,826
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:09,861
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:11,817
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:11,851
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:13,855
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:13,889
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:15,885
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:15,920
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:17,910
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:17,934
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:19,906
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:19,941
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:21,930
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:21,954
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:23,948
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:23,981
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:25,947
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:25,981
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:28,006
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:28,040
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:30,027
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:30,061
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

machine_manager.py:2222: INFO
kaiten.machine_manager.MachineManager:resume_boot
1970-01-01 00:02:30,642
Resuming boot sequence

machine_manager.py:1198: INFO
kaiten.machine_manager.MachineManager:get_tool_usage_stats
1970-01-01 00:02:31,121
Finding stats {'extrusion_time_s': 506858, 'serial': 82994, 'retract_count': 2019606741, 'refurb_count': 0, 'extrusion_distance_mm': 105144085}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:32,129
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:32,159
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:34,150
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:34,173
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:36,207
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:36,262
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:41,393
Queried dbus network state

dbus.py:977: INFO
kaiten.dbus.DBusManager:_initialize_bus
1970-01-01 00:02:42,295
DBus initialized

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:42,484
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:02:42,528
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1047: INFO
kaiten.dbus.DBusManager:_initialize_discovery
1970-01-01 00:02:43,127
Bringing up MDNS/SD discovery advertising...

dbus.py:1059: INFO
kaiten.dbus.DBusManager:_initialize_discovery
1970-01-01 00:02:45,404
mDNS/SD discovery online as Makerbot-02A6AF

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-01 00:03:22,813
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 1, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "a97b52ac-220c-45b8-acce-e294d3fc198e", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\uc0c8 \ud3f4\ub354/14-18.makerbot"}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-01-01 00:03:39,872
Beginning print of /home/current_thing/14-18.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-01 00:03:39,948
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 00:03:40,019
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 00:03:40,774
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 00:03:40,883
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-01 00:03:40,951
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-01 00:03:41,012
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-01 00:03:41,978
using input kwargs

server.py:1503: INFO
kaiten.server.Server:register_fcgi
1970-01-01 00:03:42,276
Registered fcgi

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-01 00:03:49,209
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-01 00:03:50,682
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 00:04:05,421
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-01 00:04:34,338
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 00:04:34,399
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 00:04:34,451
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 00:04:34,578
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 00:04:34,895
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 00:04:35,024
metadata {'bot_pid': 6, 'bounding_box_x_min': 0.0, 'uuid': 'a6693666-0d7b-4c53-8f02-9d6e93ac435c', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 2108049, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [15.947635650634766], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [5226.828125], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 4825.27978515625, 'uses_raft': False, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:263: ERROR
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 00:04:35,064
.makerbot does not match machine config! Error: 

machine_manager.py:735: ERROR
kaiten.machine_manager.MachineManager:_handle_error
1970-01-01 00:04:35,089
Handling error: 1049, severity: process_critical

machine_manager.py:745: ERROR
kaiten.machine_manager.MachineManager:_handle_error
1970-01-01 00:04:35,102
Critical error code 1049

machine_manager.py:1109: INFO
kaiten.machine_manager.MachineManager:_cancel_process
1970-01-01 00:04:35,117
Cancelling process {"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "final_heating", "cancellable": true, "progress": 43, "can_print_again": false, "error": null, "username": "printerpanel", "id": 1, "name": "PrintProcess", "methods": [], "filepath": "/home/current_thing/14-18.makerbot", "uuid": "a97b52ac-220c-45b8-acce-e294d3fc198e", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\uc0c8 \ud3f4\ub354/14-18.makerbot"}

printprocess.py:942: INFO
kaiten.processes.printprocess.PrintProcess:cancel
1970-01-01 00:04:35,166
normal cancel

printprocess.py:1130: INFO
kaiten.processes.printprocess.PrintProcess:_do_cancel
1970-01-01 00:04:36,797
Start sequence never finished, not mopving

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-01 00:04:52,392
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 00:04:52,515
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 00:04:53,060
EEPROM transaction done after 0 seconds (15 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 00:04:53,074
EEPROM transaction yields ok

printprocess.py:424: INFO
kaiten.processes.printprocess.PrintProcess:_cleanup_filepath
1970-01-01 00:04:53,486
Removing filepath /home/current_thing/14-18.makerbot

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-01 00:04:53,547
In terminal hold step, errors ignored

machine_manager.py:2241: INFO
kaiten.machine_manager.MachineManager:acknowledged
1970-01-01 00:16:32,619
Acknowledging error state in kaiten (error id 0)

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-01 00:16:34,115
Process method invoked: acknowledge_failure

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-01 03:07:57,303
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 2, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "93f69a47-3371-445b-8566-1cc08bbc5d6f", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\uc0c8 \ud3f4\ub354/6.makerbot"}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-01-01 03:08:07,962
Beginning print of /home/current_thing/6.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-01 03:08:08,028
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:08:08,075
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:08:08,269
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:08:08,403
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-01 03:08:08,497
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-01 03:08:08,539
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-01 03:08:09,519
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-01 03:08:16,670
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-01 03:08:18,397
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:08:33,173
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-01 03:09:01,447
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:09:01,516
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:09:01,571
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:09:01,713
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 03:09:01,995
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 03:09:02,211
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': '00c75acc-04fe-4ee5-af62-20c7efd305ad', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 2397161, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [8.6447811126708984], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [2833.322021484375], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 5147.72021484375, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 03:09:02,238
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 03:09:02,449
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/supportType': 'breakaway', 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': True, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportRoofSolidThickness': 3, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/supportBreakawayModelRoofSpacing': 0.16, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.16, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': True, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/supportCutout': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'hilbert_fill', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftSupportSpacing': 0.10000000000000001, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.16, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportCutoutExtraDistance': 0.59999999999999998, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.32000000000000001, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': True, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 45, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\admin\\AppData\\Local\\Temp\\tmp-9544uHbs42irTylJ\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 45, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'preferences/overrides/supportType': 'breakaway', 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 45, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:09:02,943
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:09:03,176
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:09:03,534
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:09:03,644
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:11:19,471
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:11:19,564
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 03:11:19,624
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-01 03:11:21,622
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 03:11:28,736
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 03:11:28,752
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 03:11:28,766
Beginning JT parse

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 03:54:53,153
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 03:54:53,276
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-01 03:55:12,728
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 03:55:12,829
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 03:55:13,388
EEPROM transaction done after 0 seconds (8 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 03:55:13,423
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-01 03:55:14,076
In terminal hold step, errors ignored

process.py:436: INFO
kaiten.processes.printprocess.PrintProcess:process_method
1970-01-01 04:04:12,388
Process method invoked: acknowledge_completed

decorator.py:175: INFO
kaiten.machine_manager.MachineManager:decorator
1970-01-01 04:04:47,740
{"reason": null, "thing_id": null, "cancelled": false, "elapsed_time": 0, "start_time": null, "step": "initializing", "cancellable": true, "progress": 0, "can_print_again": false, "error": null, "username": "printerpanel", "id": 3, "name": "PrintProcess", "methods": [], "filepath": null, "uuid": "226d6232-0b9c-48a9-845c-3d17790b5863", "print_temperatures": {}, "filament_extruded": 0, "complete": false, "filename": "/home/usb_storage/\uc0c8 \ud3f4\ub354/18.makerbot"}

printprocess.py:511: INFO
kaiten.processes.printprocess.PrintProcess:_do_initialize
1970-01-01 04:04:53,345
Beginning print of /home/current_thing/18.makerbot from client printerpanel (b'') via method printerpanel

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-01 04:04:53,417
Failed to load /home/scripts/start.json, continuing.

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:04:53,449
Sequence: load_temperature_settings(([180],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:04:53,668
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:04:53,800
Sequence: home_gantry((), {})

util.py:50: INFO
kaiten.builtins.type:read_json_file
1970-01-01 04:04:53,902
Failed to load /home/scripts/home.json, continuing.

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-01 04:04:53,947
Homing (['y'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-01 04:04:54,884
using input kwargs

gantryhomeactivity.py:27: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_sequence_handler
1970-01-01 04:05:02,124
Homing (['x'],), {}

xyhomeactivity.py:50: INFO
kaiten.activities.gantryhomeactivity.GantryHomeActivity:_home_axis
1970-01-01 04:05:03,524
using input kwargs

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:05:18,204
Sequence: home_z((), {})

zhomeactivity.py:255: INFO
kaiten.activities.zhomeactivity.ZHomeActivity:_set_z_home_position
1970-01-01 04:05:46,448
Found Z: start 2.7493704776217873 cur 0.0 d -2.7493704776217873

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:05:46,513
Sequence: move_axis((2, 5, 10, False), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:05:46,568
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:05:46,695
Sequence: wait_for_file((), {})

printprocess.py:226: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 04:05:46,997
Check match for [15], 11

printprocess.py:241: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 04:05:47,116
metadata {'bot_pid': 11, 'bounding_box_x_min': 0.0, 'uuid': 'df5c5b25-8d56-4527-93aa-17d896e707e6', 'bounding_box_z_max': 0.0, 'tool_type': [2], 'file_size': 1104104, 'extruder_temperature': [215], 'material': ['pla'], 'bounding_box_y_min': 0.0, 'extruder_count': 1, 'extrusion_mass_g': [3.0508766174316406], 'bounding_box_x_max': 0.0, 'extrusion_distance_mm': [999.9229736328125], 'bounding_box_y_max': 0.0, 'chamber_temperature': 0, 'duration_s': 3475.860107421875, 'uses_raft': True, 'bounding_box_z_min': 0.0, 'thing_id': 0}

printprocess.py:288: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 04:05:47,152
environment {'X_PURGE_END': -150, 'X_PARK': -149, 'Y_PARK': -95, 'X_HOME': -157, 'Z_HOME': 0, 'A_PURGE_END': 25, 'Z_PURGE_START': 0.20000000000000001, 'X_PURGE_START': 145, 'Y_HOME': -101, 'EXTRUDER_0_TEMPERATURE': 215, 'Z_PARK': 164, 'HOME_TEMP': 180, 'CHAMBER_TEMPERATURE': 0, 'Y_PURGE_END': -100, 'Y_SAFE_ZHOME': 99.099999999999994, 'Z_HEIGHT': 165, 'Y_PURGE_START': -100, 'X_PARK_PREP': -149, 'X_SAFE_ZHOME': 146.91, 'Y_PARK_PREP': -95, 'Z_PURGE_END': 0.20000000000000001, 'A_PURGE_START': 2, 'EXTRUDER_0_PREHEAT_TEMP': 180}

printprocess.py:322: INFO
kaiten.processes.printprocess.PrintProcess:_initialize_print_metadata
1970-01-01 04:05:47,315
flattened slice config: {'gaggles/default/brimsBaseWidth': 2.5, 'gaggles/default/supportShellProfiles/body/doInternalSpurs': False, 'gaggles/default/raftFillProfiles/purge_base/extrusionWidth': 0.40000000000000002, 'build_plane_temperature': None, 'gaggles/default/rateLimitMinSpeed': 10, 'gaggles/default/bridgeAnchorWidth': 0.80000000000000004, 'gaggles/default/modelShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/bridge/extrusionProfile': 'bridges', 'gaggles/default/modelShellProfiles/extent/numberOfShells': 2, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/supported_floor/orientationInterval': 0, 'gaggles/default/modelShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationInterval': 0, 'gaggles/default/doSupportEdgeFollow': False, 'gaggles/default/modelFillProfiles/base_layer_surface/orientationInterval': 90, 'gaggles/default/raftShellProfiles/surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/extrusionVolumeMultiplier': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRestartDistance': 0, 'gaggles/default/raftShellProfiles/base/innerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/orientationRange': 360, 'gaggles/default/supportSolidExpansionOutset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/feedrate': 40, 'gaggles/default/startPosition/z': 0.20000000000000001, 'gaggles/default/modelShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/supportRoofModelSpacing': 0.40000000000000002, 'gaggles/default/modelFillProfiles/supported_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/feedrate': 110, 'gaggles/default/modelShellProfiles/floor_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/oozePathExtensionDistance': 0.75, 'gaggles/default/modelFillProfiles/bridge/density': 1, 'gaggles/default/areaToTaperSupportsIn': 9223372036854776000, 'gaggles/default/doBreakawaySupport': False, 'gaggles/default/raftProfiles/base/outsetFromModelEdge': 4, 'gaggles/default/raftProfiles/base/numberOfLayers': 1, 'gaggles/default/modelShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/raftShellProfiles/interface/insetDistanceMultiplier': 0.45000000000000001, 'gaggles/default/fanLayer': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/density': 1, 'gaggles/default/supportShellProfiles/roof_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftProfiles/surface/ZOffset': -0.029999999999999999, 'gaggles/default/doExponentialDeceleration': True, 'gaggles/default/supportFillProfiles/floor_surface/extrusionProfile': 'support_floor_surface', 'gaggles/default/raftFillProfiles/base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/innerExtrusionProfile': 'raft_base', 'gaggles/default/rateLimitSplitRecursionDepth': 8, 'gaggles/default/supportShellProfiles/floor_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftProfiles/interface/outsetFromModelEdge': 0, 'gaggles/default/raftProfiles/purge_base/outsetFromModelEdge': 1, 'gaggles/default/shellsLeakyConnections': True, 'gaggles/default/supportShellProfiles/body/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.5, 'gaggles/default/supportShellProfiles/base_layer_surface/numberOfShells': 1, 'gaggles/default/floorSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/bridge/pattern': 'bridge_fill', 'gaggles/default/supportShellProfiles/base_layer_surface/outerExtrusionProfile': 'support_floor_surface', 'gaggles/default/raftShellProfiles/base/doExternalSpurs': True, 'gaggles/default/modelShellProfiles/roof_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/floor_surface/orientationInterval': 90, 'gaggles/default/supportShellProfiles/extent/infillShellSpacingMultiplier': 1, 'gaggles/default/supportMinMorphArea': 0, 'gaggles/default/modelFillProfiles/bridge/orientationInterval': 0, 'gaggles/default/fixedLayerStartX': 0, 'gaggles/default/fixedLayerStartY': 0, 'gaggles/default/supportLeakyConnections': True, 'gaggles/default/supportShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftExtraOffset': 0, 'gaggles/default/roofSolidThickness': 0, 'gaggles/default/raftBaseInfillShellSpacingMultiplier': 0, 'gaggles/default/fanModulationThreshold': 0.5, 'gaggles/default/minSpeedMultiplier': 0.29999999999999999, 'gaggles/default/purgeWallWidth': 1, 'gaggles/default/raftShellProfiles/base/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/purge_base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/roof_surface/density': 1, 'gaggles/default/raftFillProfiles/surface/pattern': 'local_no_warp', 'gaggles/default/raftShellProfiles/surface/numberOfShells': 2, 'gaggles/default/modelFillProfiles/solid/density': 1, 'gaggles/default/modelFillProfiles/bridge/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/insetDistanceMultiplier': 1, 'gaggles/default/modelShellProfiles/base_layer_surface/innerExtrusionProfile': 'raft_base', 'chamber_temperature': None, 'gaggles/default/supportShellProfiles/roof_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/layerThickness': 0.40000000000000002, '_bot': 'replicator_b', 'gaggles/default/doExternalSpurs': True, 'gaggles/default/minSparseRegionArea': 0.10000000000000001, 'gaggles/default/raftProfiles/interface/extruderID': 0, 'gaggles/default/maxConnectionLength': 10, 'gaggles/default/modelFillProfiles/bridge/orientationOffset': 0, 'gaggles/default/fanSpeed': 0.94999999999999996, 'gaggles/default/modelFillProfiles/sparse/diamondFillTurnDistance': 0.40000000000000002, 'gaggles/default/modelFillProfiles/solid/considerFillPathWidth': True, 'gaggles/default/defaultExtruder': 0, 'gaggles/default/raftProfiles/purge_base/extruderID': 0, 'gaggles/default/supportFillProfiles/sparse/density': 0.20000000000000001, 'gaggles/default/raftShellProfiles/purge_base/insetDistanceMultiplier': 1, 'gaggles/default/minThickInfillImprovement': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/fanSpeed': 0.5, 'gaggles/default/coarseness': 0.0001, 'gaggles/default/xScale': 1, 'gaggles/default/modelShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/doBacklashCompensation': False, 'gaggles/default/supportFillProfiles/floor_surface/density': 0.98999999999999999, 'gaggles/default/supportShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/supportShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/fanSpeed': 0.94999999999999996, 'gaggles/default/raftProfiles/purge_base/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/fanSpeed': 0.94999999999999996, 'gaggles/default/modelShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/supportShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/adjacentFillLeakyConnections': True, 'gaggles/default/supportShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/purge_base/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/base_layer_surface/density': 0.20000000000000001, 'gaggles/default/supportFillProfiles/solid/orientationRange': 360, 'jsonProgress': True, 'gaggles/default/supportFillProfiles/base_layer_surface/consistentOrder': False, 'gaggles/default/raftShellProfiles/interface/doInternalSpurs': False, 'gaggles/default/supportFillProfiles/roof_surface/orientationInterval': 0, 'gaggles/default/raftFillProfiles/surface/density': 0.84999999999999998, 'gaggles/default/supportFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/raftShellProfiles/base/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/leakyTravelSpeedXY': 50, 'gaggles/default/supportFillProfiles/sparse/minPathLength': 0.40000000000000002, 'gaggles/default/supportFillProfiles/solid/extrusionProfile': 'support_solid', 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/toolchangeRetractDistance': 0, 'gaggles/default/modelFillProfiles/sparse/pattern': 'diamond (fast)', 'gaggles/default/modelFillProfiles/bridge/minPathLength': 0, 'gaggles/default/supportFillProfiles/sparse/consistentOrder': False, 'gaggles/default/extruderProfiles/0/extrusionProfiles/low_speed_shells/feedrate': 30, 'gaggles/default/raftFillProfiles/base/density': 0.20000000000000001, 'gaggles/default/doFanCommand': True, 'gaggles/default/supportFillProfiles/solid/pattern': 'linear', 'gaggles/default/modelFillProfiles/supported_floor/orientationOffset': 0, 'gaggles/default/supportShellProfiles/body/infillShellSpacingMultiplier': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/feedrate': 10, 'gaggles/default/modelFillProfiles/solid/pattern': 'linear', 'gaggles/default/supportShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/modelFillProfiles/supported_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/areaToTaperSupportsOut': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionProfile': 'support_sparse', 'gaggles/default/raftShellProfiles/surface/insetDistanceMultiplier': 0.80000000000000004, 'gaggles/default/modelShellProfiles/sparse/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/roof_surface/innerExtrusionProfile': 'insets', 'gaggles/default/supportModelSpacing': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/fanSpeed': 0.94999999999999996, 'gaggles/default/roofThickness': 0.80000000000000004, 'gaggles/default/supportShellProfiles/floor_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/leakyConnectionsAdjacentDistance': 0.80000000000000004, 'gaggles/default/raftProfiles/interface/numberOfLayers': 2, 'gaggles/default/supportFillProfiles/roof_surface/density': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/feedrate': 90, 'gaggles/default/supportFillProfiles/floor_surface/extrusionWidth': 0.5, 'gaggles/default/raftFillProfiles/interface/minPathLength': 0, 'gaggles/default/modelFillProfiles/solid/orientationInterval': 90, 'gaggles/default/doSmartZipper': False, 'gaggles/default/raftShellProfiles/base/numberOfShells': 3, 'gaggles/default/raftFillProfiles/interface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/restartRate': 30, 'gaggles/default/modelShellProfiles/extent/innerExtrusionProfile': 'insets', 'gaggles/default/raftShellProfiles/surface/doInternalSpurs': False, 'gaggles/default/supportedFloorThickness': 0, 'gaggles/default/modelFillProfiles/roof_surface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationRange': 360, 'gaggles/default/bridgeAnchorMinimumLength': 0.80000000000000004, 'gaggles/default/modelShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftBrimsSpacing': 1, 'gaggles/default/raftFillProfiles/interface/density': 0.5, 'gaggles/default/supportMorphAngle': 69.200000000000003, 'gaggles/default/raftShellProfiles/purge_base/infillShellSpacingMultiplier': 0, 'gaggles/default/maxSpurWidth': 0.5, 'gaggles/default/raftProfiles/base/ZOffset': 0, 'gaggles/default/paddedBaseOutlineOffset': -0.5, 'gaggles/default/supportShellProfiles/extent/innerExtrusionProfile': 'insets', 'preferences/print_mode': 'balanced', 'gaggles/default/modelFillProfiles/base_layer_surface/minPathLength': 0, 'gaggles/default/raftFillProfiles/base/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/density': 0.5, 'gaggles/default/brimsOverlapWidth': 1.5, 'gaggles/default/extruderProfiles/0/restartExtraDistance': 0.10000000000000001, 'gaggles/default/supportFillProfiles/floor_surface/considerFillPathWidth': True, 'gaggles/default/yScale': 1, 'gaggles/default/raftFillProfiles/base/pattern': 'linear', 'gaggles/default/supportShellProfiles/body/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/outerExtrusionProfile': 'outlines', 'gaggles/default/supportFillProfiles/sparse/pattern': 'linear', 'gaggles/default/modelFillProfiles/roof_surface/extrusionProfile': 'roof_surface', 'gaggles/default/bridgeMaximumLength': 80, 'gaggles/default/fixedShellStartDirection': 215, 'gaggles/default/floorThickness': 0.80000000000000004, 'gaggles/default/useRelativeExtruderPositions': False, 'gaggles/default/modelFillProfiles/sparse/diamondFillZigZagOverlap': 0.25, 'gaggles/default/startPosition/y': -100, 'gaggles/default/extruderProfiles/0/extrusionProfiles/brims/fanSpeed': 0.5, 'metadataOutput': False, 'gaggles/default/modelFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/minPathLength': 0.10000000000000001, 'gaggles/default/modelFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/supportTaperAngle': 83, 'gaggles/default/modelShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/doBrims': False, 'gaggles/default/supportFillProfiles/sparse/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/minPathLength': 0, 'gaggles/default/minSpurLength': 0.34000000000000002, 'gaggles/default/supportFillProfiles/base_layer_surface/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/purge_base/doExternalSpurs': True, 'gaggles/default/modelFillProfiles/bridge/orientationRange': 360, 'gaggles/default/modelShellProfiles/sparse/innerExtrusionProfile': 'insets', 'gaggles/default/minRaftBaseGap': 10, 'gaggles/default/supportShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/modelFillProfiles/solid/orientationRange': 360, 'gaggles/default/layerHeight': 0.20000000000000001, 'gaggles/default/raftProfiles/base/extruderID': 0, 'gaggles/default/raftShellProfiles/surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/modelFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelShellProfiles/sparse/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/fanSpeed': 0.5, 'gaggles/default/raftedFloorThickness': 0, 'gaggles/default/raftProfiles/surface/layerThickness': 0.27000000000000002, 'gaggles/default/doFixedShellStart': True, 'gaggles/default/supportShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/raftShellProfiles/surface/extrusionWidth': 0.5, 'gaggles/default/raftShellProfiles/interface/numberOfShells': 2, 'gaggles/default/raftFillProfiles/interface/orientationRange': 360, 'gaggles/default/doPaddedBase': False, 'gaggles/default/raftProfiles/base/firstSurfaceZOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/feedrate': 110, 'gaggles/default/fanModulationWindow': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionVolumeMultiplier': 1, '_extruders/0': 'mk13', 'gaggles/default/doFanModulation': True, 'gaggles/default/extruderProfiles/0/temperature': 215, 'gaggles/default/raftShellProfiles/purge_base/extrusionWidth': 0.59999999999999998, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/solid/innerExtrusionProfile': 'insets', 'gaggles/default/zScale': 1, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionProfile': 'base_layer_surface', 'gaggles/default/travelSpeedZ': 23, 'gaggles/default/raftShellProfiles/interface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/preOozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/rateLimitSplitBias': 0, 'gaggles/default/roofAnchorMargin': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/insetDistanceMultiplier': 1, 'gaggles/default/supportFillProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/extruderProfiles/0/extrusionProfiles/minfillSparse/extrusionVolumeMultiplier': 1.2, 'gaggles/default/exponentialDecelerationRatio': 0.375, 'gaggles/default/modelFillProfiles/rafted_floor/orientationOffset': 0, 'gaggles/default/baseLayerHeight': 0.20000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/feedrate': 30, 'gaggles/default/extruderProfiles/0/extrusionProfiles/bridges/feedrate': 40, 'gaggles/default/doRateLimit': True, 'gaggles/default/supportShellProfiles/body/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/numberOfShells': 0, 'gaggles/default/modelFillProfiles/supported_floor/pattern': 'linear', 'gaggles/default/modelShellProfiles/roof_surface/firstShellOffset': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/outlines/fanSpeed': 0.94999999999999996, 'gaggles/default/extruderProfiles/0/toolchangeRetractRate': 0, 'gaggles/default/modelFillProfiles/sparse/minPathLength': 1.3999999999999999, 'gaggles/default/raftShellProfiles/interface/doExternalSpurs': True, 'doRaft': True, 'gaggles/default/supportFillProfiles/roof_surface/considerFillPathWidth': True, 'gaggles/default/raftFillProfiles/purge_base/orientationRange': 360, 'gaggles/default/raftFillProfiles/purge_base/extrusionProfile': 'raft_base', 'gaggles/default/raftShellProfiles/surface/doExternalSpurs': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/feedrate': 90, 'gaggles/default/supportFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftFillProfiles/base/orientationRange': 180, 'gaggles/default/modelShellProfiles/extent/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelFillProfiles/solid/minPathLength': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/feedrate': 90, 'gaggles/default/extruderProfiles/0/feedDiameter': 1.77, 'gaggles/default/raftFillProfiles/surface/minPathLength': 0, 'gaggles/default/doSupportUnderBridges': False, 'gaggles/default/raftModelShellsSpacing': 0.26000000000000001, 'gaggles/default/modelShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/supportFillProfiles/floor_surface/minPathLength': 0.10000000000000001, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_roof_surface/feedrate': 90, 'gaggles/default/supportExtraDistance': 0.5, 'gaggles/default/raftFillProfiles/base/linearFillGroupSize': 3, 'gaggles/default/raftShellProfiles/interface/infillShellSpacingMultiplier': 0.55000000000000004, 'gaggles/default/modelShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/modelShellProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/brimsModelOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationRange': 360, 'gaggles/default/modelShellProfiles/roof_surface/infillShellSpacingMultiplier': 0, 'gaggles/default/modelFillProfiles/floor_surface/extrusionProfile': 'floor_surface', 'gaggles/default/supportFillProfiles/base_layer_surface/considerFillPathWidth': True, 'gaggles/default/travelSpeedXY': 150, 'gaggles/default/modelFillProfiles/solid/extrusionProfile': 'solid', 'gaggles/default/extruderProfiles/0/nozzleDiameter': 0.40000000000000002, 'gaggles/default/minLayerDuration': 5, 'gaggles/default/modelFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/modelFillProfiles/rafted_floor/minPathLength': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/feedrate': 40, 'gaggles/default/rateLimitSplitMoveDistance': 0.75, 'gaggles/default/supportShellProfiles/roof_surface/outerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupSize': 1, 'gaggles/default/raftFillProfiles/surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/doZHopAndRetractCombo': False, 'gaggles/default/lowSpeedShellMin': 20, 'gaggles/default/extruderProfiles/0/extrusionProfiles/halfVolumeInfill/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_floor_surface/feedrate': 10, 'gaggles/default/doSplitLongMoves': False, 'gaggles/default/modelFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/spurs/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/fanSpeed': 0.5, 'gaggles/default/modelFillProfiles/solid/orientationOffset': 0, 'gaggles/default/extruderProfiles/0/toolchangeRestartRate': 0, 'gaggles/default/supportShellProfiles/extent/extrusionWidth': 0.40000000000000002, 'gaggles/default/doPurgeEarlyEnd': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparseRoofSurfaceFills/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/purge/feedrate': 100, 'memoryThreshold': 4096, 'gaggles/default/supportFillProfiles/roof_surface/orientationRange': 360, 'gaggles/default/doMixedRaft': False, 'gaggles/default/raftProfiles/surface/layerWidth': 0.40000000000000002, 'gaggles/default/defaultSupportMaterial': 0, 'gaggles/default/modelShellProfiles/base_layer_surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftProfiles/purge_base/numberOfLayers': 2, 'gaggles/default/modelFillProfiles/sparse/orientationRange': 2, 'gaggles/default/exponentialDecelerationMinSpeed': 0, 'gaggles/default/doRaft': True, 'gaggles/default/purgeWallBaseFilamentWidth': 2, 'gaggles/default/raftProfiles/surface/numberOfLayers': 2, 'gaggles/default/minimumMoveDistance': 0.01, 'gaggles/default/raftFillProfiles/surface/orientationInterval': 90, 'gaggles/default/doMinfill': False, 'gaggles/default/doFixedLayerStart': True, 'gaggles/default/supportFillProfiles/solid/minPathLength': 0.10000000000000001, 'gaggles/default/supportFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/bedZOffset': 0, 'gaggles/default/startPosition/x': -150, 'gaggles/default/supportShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/doPurgeWall': False, 'gaggles/default/modelShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/purge_base/numberOfShells': 0, 'gaggles/default/raftFillProfiles/surface/extrusionProfile': 'raft_surface', 'gaggles/default/modelFillProfiles/roof_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/body/outerExtrusionProfile': 'outlines', 'gaggles/default/raftProfiles/interface/layerWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelFillProfiles/base_layer_surface/linearFillGroupDensity': 1, 'gaggles/default/rateLimitSpeedRatio': 0.29999999999999999, 'gaggles/default/modelShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/supportFillProfiles/base_layer_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftProfiles/surface/extruderID': 0, 'gaggles/default/doInternalSpurs': False, 'gaggles/default/raftProfiles/surface/firstSurfaceZOffset': 0, 'gaggles/default/modelShellProfiles/sparse/outerExtrusionProfile': 'outlines', 'gaggles/default/roofSurfaceThickness': 0.80000000000000004, 'gaggles/default/modelFillProfiles/floor_surface/density': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/doInternalSpurs': False, 'gaggles/default/raftProfiles/purge_base/ZOffset': 0, 'preferences/bounding_box': None, 'gaggles/default/extruderProfiles/0/retractRate': 50, 'gaggles/default/modelShellProfiles/extent/outerExtrusionProfile': 'outlines', 'gaggles/default/raftFillProfiles/interface/orientationInterval': 90, 'gaggles/default/modelFillProfiles/sparse/density': 0.10000000000000001, 'gaggles/default/modelFillProfiles/supported_floor/extrusionProfile': 'rafted_floor', 'gaggles/default/supportFillProfiles/sparse/orientationRange': 360, 'gaggles/default/raftProfiles/interface/layerThickness': 0.27000000000000002, 'gaggles/default/raftProfiles/base/layerWidth': 2.5, 'gaggles/default/modelShellProfiles/base_layer_surface/infillShellSpacingMultiplier': 0.69999999999999996, 'gaggles/default/raftFillProfiles/base/linearFillGroupDensity': 2.2000000000000002, 'gaggles/default/modelFillProfiles/roof_surface/pattern': 'linear', 'gaggles/default/raftInterfaceShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationInterval': 0, 'gaggles/default/supportFillProfiles/solid/density': 0.5, 'gaggles/default/raftProfiles/interface/ZOffset': -0.14000000000000001, 'gaggles/default/raftShellProfiles/purge_base/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/extent/numberOfShells': 0, 'gaggles/default/raftShellProfiles/interface/innerExtrusionProfile': 'insets', 'gaggles/default/supportShellProfiles/floor_surface/insetDistanceMultiplier': 1, 'gaggles/default/raftShellProfiles/base/outerExtrusionProfile': 'raft_base', 'gaggles/default/raftFillProfiles/base/considerFillPathWidth': True, 'gaggles/default/supportAngle': 68, 'gaggles/default/raftProfiles/surface/outsetFromModelEdge': 4, 'gaggles/default/doSupport': False, 'gaggles/default/supportFillProfiles/solid/orientationOffset': 90, 'gaggles/default/horizontalInset': 0, 'gaggles/default/modelShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/modelFillProfiles/rafted_floor/density': 1, 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_surface/feedrate': 90, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/fanSpeed': 0.5, 'gaggles/default/modelShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/rateLimitTransmissionRate': 150, 'gaggles/default/supportShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/floor_surface/outerExtrusionProfile': 'outlines', 'gaggles/default/modelShellProfiles/base_layer_surface/insetDistanceMultiplier': 1, 'configPath': 'C:\\Users\\admin\\AppData\\Local\\Temp\\tmp-9544SoA5hg8uQRSE\\config.json', 'gaggles/default/backlashEpsilon': 0.050000000000000003, 'gaggles/default/supportShellProfiles/roof_surface/numberOfShells': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/floor_surface/feedrate': 90, 'gaggles/default/raftShellProfiles/base/insetDistanceMultiplier': 0.40000000000000002, '_materials/0': 'pla', 'gaggles/default/raftFillProfiles/base/minPathLength': 0, 'gaggles/default/supportShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/sparse/infillShellSpacingMultiplier': 0, 'gaggles/default/raftShellProfiles/surface/outerExtrusionProfile': 'raft_base', 'gaggles/default/supportShellProfiles/body/innerExtrusionProfile': 'insets', 'gaggles/default/raftProfiles/interface/firstSurfaceZOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/pattern': 'linear', 'gaggles/default/raftProfiles/base/layerThickness': 0.29999999999999999, 'gaggles/default/modelFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportShellProfiles/solid/insetDistanceMultiplier': 1, 'jsonToolpathOutput': False, 'gaggles/default/supportFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/supportFillProfiles/floor_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/oozeFeedstockDistance': 0.10000000000000001, 'gaggles/default/raftFillProfiles/interface/orientationOffset': 45, 'gaggles/default/rateLimitBufferSize': 100, 'gaggles/default/numberOfInternalBrims': 5, 'gaggles/default/raftShellProfiles/base/infillShellSpacingMultiplier': 0.10000000000000001, 'gaggles/default/backlashFeedback': 0.90000000000000002, 'gaggles/default/raftShellProfiles/base/extrusionWidth': 0.5, 'gaggles/default/supportLayerHeight': 0.20000000000000001, 'gaggles/default/minSpurWidth': 0.12, 'gaggles/default/supportShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftFirstSurfaceZOffset': -0.029999999999999999, 'gaggles/default/backlashY': 0.089999999999999997, 'gaggles/default/supportFillProfiles/solid/orientationInterval': 0, 'gaggles/default/extruderProfiles/0/extrusionProfiles/base_layer_surface/fanSpeed': 1, 'gaggles/default/modelShellProfiles/floor_surface/doInternalSpurs': False, 'gaggles/default/modelFillProfiles/sparse/extrusionProfile': 'sparse', 'gaggles/default/raftShellProfiles/purge_base/firstShellOffset': 0.5, 'gaggles/default/backlashX': 0, 'gaggles/default/supportFillProfiles/roof_surface/orientationOffset': 0, 'gaggles/default/modelFillProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/convertSparsePulseValue': 0, 'gaggles/default/supportShellProfiles/roof_surface/insetDistanceMultiplier': 1, 'gaggles/default/adjacentFillLeakyDistanceRatio': 1.3999999999999999, 'gaggles/default/floorSolidThickness': 0, 'gaggles/default/doMixedSupport': False, 'gaggles/default/raftFillProfiles/base/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftModelSpacing': 0.33000000000000002, 'gaggles/default/modelShellProfiles/floor_surface/innerExtrusionProfile': 'insets', 'gaggles/default/raftFillProfiles/surface/orientationOffset': 0, 'gaggles/default/supportShellProfiles/solid/doInternalSpurs': False, 'gaggles/default/numberOfBrims': 5, 'gaggles/default/modelShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportShellProfiles/solid/outerExtrusionProfile': 'outlines', 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/feedrate': 90, 'gaggles/default/supportFillProfiles/sparse/extrusionProfile': 'support_sparse', 'gaggles/default/exponentialDecelerationSegmentCount': 10, 'gaggles/default/modelFillProfiles/sparse/maxThickness': 0.40000000000000002, 'gaggles/default/raftFillProfiles/purge_base/orientationInterval': 0, 'gaggles/default/supportShellProfiles/extent/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/orientationRange': 360, 'gaggles/default/supportInteriorExtruder': 0, 'gaggles/default/raftFillProfiles/interface/extrusionProfile': 'raft_interface', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_interface/feedrate': 90, 'gaggles/default/modelShellProfiles/extent/doInternalSpurs': False, 'gaggles/default/supportShellProfiles/base_layer_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/modelFillProfiles/sparse/orientationInterval': 1, 'gaggles/default/supportShellProfiles/base_layer_surface/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/firstShellOffset': 0.5, 'version': '1.2.0', 'gaggles/default/modelShellProfiles/sparse/numberOfShells': 0, 'gaggles/default/modelShellProfiles/solid/infillShellSpacingMultiplier': 0, 'gaggles/default/raftProfiles/purge_base/layerWidth': 1.3999999999999999, 'gaggles/default/modelFillProfiles/rafted_floor/extrusionWidth': 0.40000000000000002, 'gaggles/default/supportFillProfiles/roof_surface/extrusionProfile': 'support_roof_surface', 'gaggles/default/extruderProfiles/0/idleTemperature': 215, 'gaggles/default/supportFillProfiles/base_layer_surface/minPathLength': 0.40000000000000002, 'gaggles/default/supportShellProfiles/sparse/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/roof_surface/innerExtrusionProfile': 'support_roof_surface', 'gaggles/default/modelFillProfiles/base_layer_surface/orientationOffset': 0, 'gaggles/default/raftFillProfiles/purge_base/orientationOffset': 45, 'gaggles/default/modelShellProfiles/base_layer_surface/extrusionWidth': 0.5, 'gaggles/default/modelFillProfiles/supported_floor/density': 1, 'gaggles/default/supportFillProfiles/solid/extrusionWidth': 0.40000000000000002, 'gaggles/default/modelShellProfiles/solid/firstShellOffset': 0.5, 'gaggles/default/supportShellProfiles/floor_surface/innerExtrusionProfile': 'support_floor_surface', 'gaggles/default/supportFillProfiles/floor_surface/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/roof_surface/fanSpeed': 0.5, 'gaggles/default/splitMinimumDistance': 0.40000000000000002, 'gaggles/default/raftFillProfiles/surface/orientationRange': 90, 'gaggles/default/supportShellProfiles/base_layer_surface/insetDistanceMultiplier': 0, 'gaggles/default/doBridging': True, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_solid/fanSpeed': 0.5, 'gaggles/default/extruderProfiles/0/extrusionProfiles/sparse/feedrate': 90, 'gaggles/default/modelFillProfiles/rafted_floor/orientationInterval': 0, 'gaggles/default/modelFillProfiles/rafted_floor/pattern': 'linear', 'gaggles/default/extruderProfiles/0/extrusionProfiles/raft_base/feedrate': 10, 'gaggles/default/extruderProfiles/0/extrusionProfiles/insets/fanSpeed': 0.94999999999999996, 'gaggles/default/supportShellProfiles/extent/insetDistanceMultiplier': 1, 'gaggles/default/supportShellProfiles/solid/numberOfShells': 0, 'gaggles/default/supportFillProfiles/sparse/orientationOffset': 0, 'gaggles/default/supportShellProfiles/sparse/extrusionWidth': 0.40000000000000002, 'gaggles/default/raftShellProfiles/interface/firstShellOffset': 0.5, 'gaggles/default/modelFillProfiles/floor_surface/extrusionWidth': 0.40000000000000002, 'gaggles/default/extruderProfiles/0/extrusionProfiles/support_sparse/feedrate': 90, 'gaggles/default/extruderProfiles/0/retractDistance': 0.5}

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:05:47,542
Sequence: load_temperature_settings(([215],), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:05:47,584
Sequence: heat((), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:05:47,669
Sequence: set_position((3, 0), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:05:47,715
Sequence: wait_for_heaters_at_target((5, [True]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:08:03,353
Sequence: move(([145, -100, 0.20000000000000001, 2], 200, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:08:03,425
Sequence: move(([-150, -100, 0.20000000000000001, 25], 40, [False, False, False, False]), {})

printprocess.py:994: INFO
kaiten.processes.printprocess.PrintProcess:_execute_seq_command
1970-01-01 04:08:03,504
Sequence: set_position((3, 0), {})

printprocess.py:782: INFO
kaiten.processes.printprocess.PrintProcess:_do_run
1970-01-01 04:08:04,952
Beginning print sequence

printprocess.py:1225: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 04:08:12,686
Awaiting toolhead sync confirmation...

printprocess.py:1232: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 04:08:12,722
Got toolhead sync confirmation after 0 cycles

printprocess.py:1233: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 04:08:12,745
Beginning JT parse

printprocess.py:1247: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 04:28:04,717
Exhausting acceleration buffer

printprocess.py:1253: INFO
kaiten.processes.printprocess.PrintProcess:_print
1970-01-01 04:28:04,970
Exhausting move buffer, disabling stall error

printprocess.py:833: INFO
kaiten.processes.printprocess.PrintProcess:_update_tool_usage
1970-01-01 04:28:28,431
Updating tool usage stats...

activitybase.py:266: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 04:28:28,487
EEPROM transaction begins after 0 seconds (0 iterations)

activitybase.py:274: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 04:28:29,045
EEPROM transaction done after 0 seconds (15 iterations)

activitybase.py:282: INFO
kaiten.processes.printprocess.PrintProcess:_await_eeprom_transaction_finished
1970-01-01 04:28:29,068
EEPROM transaction yields ok

printprocess.py:624: INFO
kaiten.processes.printprocess.PrintProcess:_update_toolhead_errors
1970-01-01 04:28:29,433
In terminal hold step, errors ignored

main.py:29: INFO
kaiten.main:log_startup
1970-01-01 00:01:20,148
kaiten 1.9.0 started

main.py:30: INFO
kaiten.main:log_startup
1970-01-01 00:01:20,280
process id: 639

main.py:31: INFO
kaiten.main:log_startup
1970-01-01 00:01:20,341
python version: '3.4.3 (default, Nov 22 2016, 17:44:19) \n[GCC 4.8.1 20130401 (prerelease)]'

server.py:80: INFO
kaiten.server.Server:__init__
1970-01-01 00:01:21,276
Kaiten starting with firmware version 2.6.3.736

machine_manager.py:99: INFO
kaiten.machine_manager.MachineManager:__init__
1970-01-01 00:01:21,738
count: 1

machine_manager.py:101: INFO
kaiten.machine_manager.MachineManager:__init__
1970-01-01 00:01:21,773
Initialized configured tools to [<mbcoreutils.tool_mappings.Tool object at 0xb62930b0>]

machine_manager.py:438: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:24,182
Updating settings for [<mbcoreutils.tool_mappings.Tool object at 0xb62930b0>]

machine_manager.py:449: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:24,205
Generating settings for tool mk13

machine_manager.py:467: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:24,268
Generated config {'nozzle_diameter': 0.40000000000000002, 'max_speed_mm_per_second': {'a': 8.0}, 'materials': {'pla': {'linear_density': 0.0030999999999999999, 'retract_rate': 50, 'retract_distance': 0.5, 'toolheads': {'bronx': {'heater': {'print_temperature_default': 215, 'sag_temperature_threshold': 20, 'rise_timeout_min': 1, 'overrun_temperature_threshold': 20, 'at_temp_timeout_min': 3, 'fan_preload': 15, 'rise_temperature_threshold': 10, 'preload_tick_delay': 8900, 'wait_for_target_timeout': 5, 'preheat_temperature': 180}}}, 'temperature': 215, 'restart_rate': 30, 'acceleration': {'extruder_relax_decay_time': 300, 'impulse_speed_limit_mm_per_s': {'a': 3.0}, 'max_speed_change_mm_per_s': {'a': 0.5}, 'rate_mm_per_s_sq': {'a': 10.0}, 'motor_damping_rshift': 4, 'velocity_error_lshift': 2, 'extruder_relax_shift_offset': 1, 'extruder_responsiveness_rshift': 7, 'min_speed_change_mm_per_s': {'a': 0.01}, 'slip_compensation_table': [[0, 0], [0.48770000000000002, 0.52149999999999996], [0.73150000000000004, 0.78159999999999996], [0.97540000000000004, 1.042], [1.4631000000000001, 1.5563], [1.9508000000000001, 2.0581], [2.4384999999999999, 2.5665], [2.9260999999999999, 3.0358999999999998], [3.4138000000000002, 3.3925000000000001], [3.9015, 3.7065000000000001], [4.3891999999999998, 3.9777], [4.8769999999999998, 4.2672999999999996], [5.3646000000000003, 4.8449], [6.8277000000000001, 6.8277000000000001], [7.8030999999999997, 8.5833999999999993], [8.7783999999999995, 10.0952], [100, 100]]}, 'feed_diameter': 1.77, 'ooze_feedstock_distance': 0.10000000000000001, 'max_flow_rate': 5.0}}, 'material_default': 'pla', 'home': {'retract_distance_mm': 40.0, 'restart_distance_mm': 40.0}, 'filament': {'unload_distance_two': 50, 'load_speed': 6, 'unload_delay': 10, 'unload_distance_one': 40, 'load_distance': 100, 'unload_speed_two': 10, 'unload_speed_one': 95, 'auto_unload_distance': 80}, 'steps_per_mm': {'a': 108.55}}

machine_manager.py:473: INFO
kaiten.machine_manager.MachineManager:_set_extruder_config
1970-01-01 00:01:24,308
Updating settings for material pla

machine_manager.py:282: INFO
kaiten.machine_manager.MachineManager:create_pymachine
1970-01-01 00:01:28,054
libmachine initialized from config

server.py:163: INFO
kaiten.server.Server:__init__
1970-01-01 00:01:28,229
Listening to usb descriptor at address /dev/g_3dprinter

bwcamera.py:253: INFO
kaiten.bwcamera.CameraContract:__next__
1970-01-01 00:01:29,047
Started camera stream

server.py:760: INFO
kaiten.server.Server:run
1970-01-01 00:01:29,965
Running Server

dbus.py:1073: INFO
kaiten.dbus.DBusManager:_init_wifi
1970-01-01 00:01:32,364
DBus wifi initialized

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:32,480
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:32,504
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:33,773
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:33,796
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:35,777
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:35,811
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:37,788
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:37,822
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:39,807
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:39,841
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:41,829
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:41,863
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:43,837
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:43,871
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:45,859
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:45,892
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:47,867
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:47,900
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:49,867
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:49,901
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

fontdownload.py:109: INFO
kaiten.fontdownload.FontDownload:__next__
1970-01-01 00:01:49,983
Font download complete

scheduler.py:368: ERROR
kaiten.scheduler.ContractGeneratorManager:run
1970-01-01 00:01:50,007
Evicting FontDownload due to unhandled exception
Traceback (most recent call last):
  File "/usr/lib/python3.4/site-packages/kaiten/scheduler.py", line 362, in run
    next(contract.generator)
  File "/usr/lib/python3.4/site-packages/kaiten/fontdownload.py", line 111, in __next__
    {'available_languages': FontDownload.ui_cjk_langs})
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 989, in notify_client
    client = self._get_client(client)
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 975, in _get_client
    raise Exception(getattr(client, 'name', client) + ' not connected')
Exception: lcd not connected
dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:51,887
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:51,918
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:53,897
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:53,931
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:55,921
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:55,945
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:57,940
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:01:57,959
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:01:59,976
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:00,011
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:01,968
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:02,001
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:03,994
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:04,017
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:06,018
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:06,060
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:08,012
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:08,036
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:10,017
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:10,051
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:12,599
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:12,634
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:14,607
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:14,640
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:16,639
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:16,672
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:18,649
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:18,683
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:20,667
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:20,701
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:22,687
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:22,718
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:24,719
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:24,753
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:26,729
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:26,764
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

machine_manager.py:2222: INFO
kaiten.machine_manager.MachineManager:resume_boot
1970-01-01 00:02:27,385
Resuming boot sequence

machine_manager.py:1198: INFO
kaiten.machine_manager.MachineManager:get_tool_usage_stats
1970-01-01 00:02:27,849
Finding stats {'extrusion_time_s': 509433, 'serial': 82994, 'retract_count': 3271957446, 'refurb_count': 0, 'extrusion_distance_mm': 105759384}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:28,879
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:28,899
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:30,889
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:30,927
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:1218: ERROR
kaiten.dbus.DBusManager:gen_next
1970-01-01 00:02:32,916
Dbus exception: DBusException(dbus.String('The name net.connman was not provided by any .service files'),) in _network_state

dbus.py:1095: ERROR
kaiten.dbus.DBusManager:callback
1970-01-01 00:02:32,965
Error in _network_state: {'code': 99, 'data': 'org.freedesktop.DBus.Error.ServiceUnknown: The name net.connman was not provided by any .service files', 'message': 'dbus method error'}

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:38,221
Queried dbus network state

dbus.py:977: INFO
kaiten.dbus.DBusManager:_initialize_bus
1970-01-01 00:02:39,022
DBus initialized

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:02:39,181
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:02:39,207
notifying clients of network state: {'state': 'offline', 'wifi': 'enabled', 'tethering': False, 'tether_name': ''}

dbus.py:1047: INFO
kaiten.dbus.DBusManager:_initialize_discovery
1970-01-01 00:02:39,883
Bringing up MDNS/SD discovery advertising...

dbus.py:1059: INFO
kaiten.dbus.DBusManager:_initialize_discovery
1970-01-01 00:02:40,776
mDNS/SD discovery online as Makerbot-02A6AF

server.py:1503: INFO
kaiten.server.Server:register_fcgi
1970-01-01 00:03:17,608
Registered fcgi

dbus.py:1160: INFO
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-01 00:03:24,083
wifi technology change: Connected->1

dbus.py:1175: WARNING
kaiten.dbus.DBusManager:wifi_tech_change
1970-01-01 00:03:24,125
Property Connected unhandled, no notification

dbus.py:259: INFO
kaiten.dbus.DBusManager:_network_state
1970-01-01 00:03:24,935
Queried dbus network state

server.py:339: INFO
kaiten.server.Server:network_state_notify
1970-01-01 00:03:25,005
notifying clients of network state: {'tethering': False, 'ip': dbus.String('169.254.14.179', variant_level=1), 'wifi': 'enabled', 'static': False, 'dns': [], 'tether_name': '', 'state': dbus.String('wifi', variant_level=1), 'netmask': dbus.String('255.255.0.0', variant_level=1), 'service_hash': 'c4ae', 'name': dbus.String('DKC_WiFi', variant_level=1)}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-01 00:03:25,042
Checking firmware updates

server.py:1787: ERROR
kaiten.server.HTTPIOGenerator:_error
1970-01-01 00:03:25,504
HTTP error connecting
Traceback (most recent call last):
  File "/usr/lib/python3.4/site-packages/kaiten/server.py", line 1821, in _create_generator
    for event in self._conn.connect():
  File "/usr/lib/python3.4/site-packages/kaiten/http/client.py", line 1223, in connect
    yield from super().connect()
  File "/usr/lib/python3.4/site-packages/kaiten/http/client.py", line 768, in connect
    raise self._dns_error
  File "/usr/lib/python3.4/site-packages/kaiten/http/client.py", line 746, in do_dns_lookup
    socket.AF_INET, socket.SOCK_STREAM)
  File "/usr/lib/python3.4/socket.py", line 533, in getaddrinfo
    for res in _socket.getaddrinfo(host, port, family, type, proto, flags):
socket.gaierror: [Errno -3] Temporary failure in name resolution
firmwareupdates.py:353: ERROR
kaiten.firmwareupdates.FirmwareUpdates:_check_error_callback
1970-01-01 00:03:25,689
Error retrieving firmware list, response code None

server.py:1787: ERROR
kaiten.server.HTTPIOGenerator:_error
1970-01-01 00:04:25,505
HTTP request timed out

firmwareupdates.py:353: ERROR
kaiten.firmwareupdates.FirmwareUpdates:_check_error_callback
1970-01-01 00:04:25,518
Error retrieving firmware list, response code None

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-01 12:03:25,037
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-01 12:03:26,818
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-02 00:03:25,037
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-02 00:03:26,658
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-02 12:03:25,039
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-02 12:03:26,676
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-03 00:03:25,044
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-03 00:03:26,690
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-03 12:03:25,043
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-03 12:03:26,624
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-04 00:03:25,045
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-04 00:03:26,752
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-04 12:03:25,050
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-04 12:03:26,711
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-05 00:03:25,053
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-05 00:03:26,857
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-05 12:03:25,057
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-05 12:03:26,816
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-06 00:03:25,074
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-06 00:03:26,840
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-06 12:03:25,075
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-06 12:03:26,657
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-07 00:03:25,077
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-07 00:03:26,840
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-07 12:03:25,078
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-07 12:03:26,735
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-08 00:03:25,087
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-08 00:03:26,741
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-08 12:03:25,109
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-08 12:03:26,751
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-09 00:03:25,110
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-09 00:03:28,711
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-09 12:03:25,116
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-09 12:03:26,812
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-10 00:03:25,139
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-10 00:03:26,881
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-10 12:03:25,142
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-10 12:03:26,821
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-11 00:03:25,145
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-11 00:03:26,921
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-11 12:03:25,149
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-11 12:03:26,862
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-12 00:03:25,150
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-12 00:03:27,308
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-12 12:03:25,154
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-12 12:03:26,959
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-13 00:03:25,158
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-13 00:03:27,028
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-13 12:03:25,161
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-13 12:03:26,898
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-14 00:03:25,162
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-14 00:03:26,973
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-14 12:03:25,165
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-14 12:03:27,047
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-15 00:03:25,168
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-15 00:03:27,383
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-15 12:03:25,172
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-15 12:03:27,006
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-16 00:03:25,177
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-16 00:03:28,046
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-16 12:03:25,178
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-16 12:03:26,920
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-17 00:03:25,184
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-17 00:03:27,045
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-17 12:03:25,185
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-17 12:03:26,948
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-18 00:03:25,186
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-18 00:03:27,096
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-18 12:03:25,191
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-18 12:03:26,920
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-19 00:03:25,195
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-19 00:03:27,212
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-19 12:03:25,199
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-19 12:03:26,993
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-20 00:03:25,203
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-20 00:03:27,066
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-20 12:03:25,207
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-20 12:03:27,065
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-21 00:03:25,212
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-21 00:03:27,100
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-21 12:03:25,212
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-21 12:03:27,007
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-22 00:03:25,217
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-22 00:03:28,019
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-22 12:03:25,219
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-22 12:03:26,996
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}

firmwareupdates.py:330: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check
1970-01-23 00:03:25,231
Checking firmware updates

firmwareupdates.py:262: INFO
kaiten.firmwareupdates.FirmwareUpdates:_check_firmware_list
1970-01-23 00:03:27,123
got latest firmware 2.6.3.736, current 2.6.3.736, returning {}